Microchip MRF24J40MA Manual

Microchip Ikke kategoriseret MRF24J40MA

Læs gratis den danske manual til Microchip MRF24J40MA (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Microchip MRF24J40MA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

 2009-2017 Microchip Technology Inc. DS00001284B-page 1

AN1284

INTRODUCTION

Developing wireless applications can be challenging.

Apart from Radio Frequency (RF) circuit designs, the

firmware development process may require the devel-

opers to understand the details of RF transceivers, as

well as the different wireless communication protocols.

Microchip has developed a way to handle the complex

RF hardware or communication protocol stack software

development, or both, which enables wireless applica-

tion developers to focus on their own application devel-

opment. This type of wireless communication is

achieved through a concise, yet powerful communica-

tion programming interface in the application layer

called MiApp which is defined in this application note.

The MiApp specification defines the programming

interfaces between the application layer and Microchip

proprietary wireless communication protocols. The

MiApp programming interface is implemented in two

ways: as configuration parameters defined in the con-

figuration file, and as a set of function calls to the Micro-

chip proprietary wireless communication protocols.

Complying with the MiApp specification defined in this

application note, applications can use any Microchip

proprietary wireless protocols. With little or no modifica-

tion in the application layer, software development can

be easily changed between a proprietary P2P/Star

topology connection protocol to a full Mesh proprietary

networking protocol for small or big networks, depend-

ing on the application needs.

FIGURE 1: BLOCK DIAGRAM OF MICROCHIP WIRELESS MiWi™ STACK

Authors: Yifeng Yang

Pradeep Shamanna

Derrick Lattibeaudiere

Vivek Anchalia

Microchip Technology Inc.

User Application

MiApp

Interchangeable Wireless Communication Protocols

MiWi™ P2P/Star

MiWi™ Mesh

Future Microchip Proprietary

Wireless Protocols ...

MiMAC

Interchangeable RF Transceivers

MRF24J40 Transceiver

MRF89XA Transceiver

Future Microchip RF

Transceivers ...

Application

Configuration

Protocol Configuration

RF Transceiver

Configuration

Microchip Wireless MiWi™ Application

Programming Interface – MiApp

AN1284

DS00001284B-page 2  2009-2017 Microchip Technology Inc.

The MiApp specification benefits wireless application

developers in multiple ways:

• Wireless application development focuses on its

application. Complex RF or protocol consider-

ations are transparently handled by the MiApp

programming interface.

• The MiApp specification allows maximum flexibil-

ity to choose a wireless protocol at any stage of

application software development with little effort,

thus greatly lowering the risk of software develop-

ment. Application requirement changes in net-

working capabilities have little or no impact in

application development.

• MiApp uses the same control interface for

Microchip wireless proprietary protocols. Once

you are familiar with MiApp, you can apply that

knowledge to the development of another applica-

tion even if it has a completely different network-

ing capability requirement.

• By communicating to the Microchip proprietary

protocols, MiApp indirectly talks to the Microchip

RF transceivers through the MiMAC interface. As

a result, MiApp indirectly enables the wireless

application developers to switch between

Microchip RF transceivers through MiMAC. This

flexibility, in turn, further reduces the development

risk of the wireless application project.

FEATURES

The MiApp programming interface has the following

features:

• Easy to learn and use

• Powerful interface to meet most requirements

from wireless applications

• Little or no extra effort to migrate the wireless

application between Microchip proprietary

wireless protocols

• Minimum footprint impact

CONSIDERATIONS

The MiApp specification is designed to support Micro-

chip proprietary wireless communication protocols.

Once a wireless application is implemented by the

MiApp programming interface, the Microchip RF trans-

ceivers are also supported through standardization in

MiMAC, the module defined in the Media Access Con-

troller (MAC) layer.

MiMAC standardizes the interface between Microchip

wireless protocols and Microchip RF transceivers.

MiMAC makes Microchip RF transceivers interchange-

able with little or no change in the software application

code. For more information on MiMAC, refer to the

Application Note “AN1283 Microchip Wireless MiWi™

Media Access Controller - MiMAC” (DS00001283).

MiMAC regulates the lower interface of the Microchip

proprietary wireless protocols, while MiApp regulates

the higher interface of the Microchip proprietary wire-

less protocols. Working together, both MiMAC and

MiApp provide wireless application developers the

maximum flexibility to choose the RF transceivers and

wireless communication protocols at any stage of soft-

ware development, thus further minimizing the risk of

software development.The block diagram in Figure 1

shows the Microchip Wireless MiWi™ stack offerings.

There are three layers of configurations for application,

protocol stacks and RF transceivers. Application con-

figuration may change between devices in the same

application according to their hardware design, role in

the application and network. Wireless application

developers tend to do the majority of the configuration

in the application layer. Protocol configurations fine-

tune the behavior of the protocol stack. The majority of

protocol stack configurations define the timing and

routing mechanism for the chosen wireless protocol.

Transceiver configurations define the frequency band,

data rate and other RF related features of the RF trans-

ceiver. The default settings for the protocol and RF

transceiver configurations may work with the applica-

tion without any modification. The application configu-

rations, however, usually need to be changed to fit the

needs of different wireless applications.

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	MRF24J40MA

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MRF24J40MA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip HS12-100D0/12DS2F Manual

18 Februar 2025

Microchip HSA0-040SDA/A0SA10 Manual

18 Februar 2025

Microchip HSA0-040SIA/A0S1F Manual

18 Februar 2025

Microchip HT12-100S0s/12ST25 Manual

17 Februar 2025

Microchip EMC2103-2 Manual

17 Februar 2025

Microchip EMC1047 Manual

17 Februar 2025

Microchip HCS201 Manual

17 Februar 2025

Microchip LE9653 Manual

17 Februar 2025

Microchip LAN7430 Manual

17 Februar 2025

Microchip HCS500 Manual

17 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025