Microchip PIC18F25K42 Manual

Microchip Ikke kategoriseret PIC18F25K42

Læs gratis den danske manual til Microchip PIC18F25K42 (40 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Microchip PIC18F25K42, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

User's Guide

Interfacing the MikroElektronika Weather Click Board™

with the PIC18F25K42

Preface

Important: Notice to customers:

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs and/or

tool descriptions may differ from those in this document. Please refer to our website

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB ® IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.

Introduction

This document describes how to use the device as a development tool to emulate and debug firmware on

a target board, as well as how to program devices.

The MikroElektronika Weather Click module contains the Bosch BME280 Environmental Sensor that is

used to detect humidity, barometric pressure, and temperature. This user's guide explains how to connect

the Weather Click to the PIC18F25K42 microcontroller, send and receive commands and raw weather

data, and convert the data into a usable format.

Recommended Reading

For the latest information on using the device, read the “ ” file (an HTMLReadme for Device #.htm

file) in the Readmes subdirectory of the MPLAB® IDE installation directory. The release notes (Readme)

contain update information and known issues that may not be included in this user’s guide.

Hardware/Software Requirements

This demonstration uses the following hardware and software components:

Hardware:

• Curiosity High Pin Count (HPC) Development Board (DM164136)

• PIC18F25K42 Microcontroller (PIC18F25K42-I/SP)

• MikroElektronika Weather Click Board™ (MIKROE-1978)

• MCP2200 USB-to-UART Breakout Module (ADM00393)

• USB Micro-B 5-pin cable (Curiosity to PC for programming/USB power)

• USB Mini-B 5-pin cable (MCP2200 to PC for displaying data)

• Jumper wires

Software:

• MPLABX® IDE v4.15 or higher

• XC8 Compiler v1.45 or higher

• Tera Term or equivalent PC terminal program

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	PIC18F25K42

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PIC18F25K42 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip HS12-100D0/12DS2F Manual

18 Februar 2025

Microchip HSA0-040SDA/A0SA10 Manual

18 Februar 2025

Microchip HSA0-040SIA/A0S1F Manual

18 Februar 2025

Microchip HT12-100S0s/12ST25 Manual

17 Februar 2025

Microchip EMC2103-2 Manual

17 Februar 2025

Microchip EMC1047 Manual

17 Februar 2025

Microchip HCS201 Manual

17 Februar 2025

Microchip LE9653 Manual

17 Februar 2025

Microchip LAN7430 Manual

17 Februar 2025

Microchip HCS500 Manual

17 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025