Microchip PIC24FJ128GC010 Manual

Microchip Ikke kategoriseret PIC24FJ128GC010

Læs gratis den danske manual til Microchip PIC24FJ128GC010 (70 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Microchip PIC24FJ128GC010, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/70

 2009-2012 Microchip Technology Inc. DS39970E-page 1

PIC24FJXXXDA1/DA2/GB2/GA3/GC0

1.0 DEVICE OVERVIEW

This document defines the programming specification

for the PIC24FJXXXDA1/DA2/GB2/GA3/GC0 families

of 16-bit microcontrollers (MCUs). This programming

specification is required only for those developing pro-

gramming support for the PIC24FJXXXDA1/DA2/GB2/

GA3/GC0 families. Customers using only one of these

devices should use development tools that already

provide support for device programming.

This specification includes programming specifications

for the following devices:

Topics covered include:

1.0 Device Overview .......................................................1

2.0 Programming Overview of the

PIC24FJXXXDA1/DA2/GB2/GA3/GC0 Families.......... 2

3.0 Device Programming – ICSP................................... 18

4.0 Device Programming – Enhanced ICSP .................. 33

5.0 The Programming Executive ................................... 51

6.0 Device Details ......................................................... 63

7.0 AC/DC Characteristics and Timing Requirements......... 66

• PIC24FJ128DA106 • PIC24FJ256DA106

• PIC24FJ128DA110 • PIC24FJ256DA110

• PIC24FJ128DA206 • PIC24FJ256DA206

• PIC24FJ128DA210 • PIC24FJ256DA210

• PIC24FJ128GB206 • PIC24FJ256GB206

• PIC24FJ128GB210 • PIC24FJ256GB210

• PIC24FJ64GA310 • PIC24FJ128GA310

• PIC24FJ64GA308 • PIC24FJ128GA308

• PIC24FJ64GA306 • PIC24FJ128GA306

• PIC24FJ64GC010 • PIC24FJ128GC010

• PIC24FJ64GC008 • PIC24FJ128GC008

• PIC24FJ64GC006 • PIC24FJ128GC006

PIC24FJXXXDA1/DA2/GB2/GA3/GC0 Families Flash

Programming Specication

PIC24FJXXXDA1/DA2/GB2/GA3/GC0

DS39970E-page 2  2009-2012 Microchip Technology Inc.

2.0 PROGRAMMING OVERVIEW

OF THE PIC24FJXXXDA1/DA2/

GB2/GA3/GC0 FAMILIES

There are two methods of programming the

PIC24FJXXXDA1/DA2/GB2/GA3/GC0 families of

devices discussed in this programming specification.

They are:

• In-Circuit Serial Programming™ (ICSP™)

• Enhanced In-Circuit Serial Programming

(Enhanced ICSP)

The ICSP programming method is the most direct

method to program the device; however, it is also the

slower of the two methods. It provides native, low-level

programming capability to erase, program and verify

the chip.

The Enhanced In-Circuit Serial Programming

(Enhanced ICSP) protocol uses a faster method that

takes advantage of the Programming Executive (PE),

as illustrated in Figure 2-1. The Programming Execu-

tive provides all the necessary functionality to erase,

program and verify the chip through a small command

set. The command set allows the programmer to

program the PIC24FJXXXDA1/DA2/GB2/GA3/GC0

MCUs without having to deal with the low-level

programming protocols of the chip.

FIGURE 2-1: PROGRAMMING SYSTEM

OVERVIEW FOR

ENHANCED ICSP™

This specification is divided into major sections that

describe the programming methods independently.

Section 3.0 “Device Programming – ICSP” describes

the In-Circuit Serial Programming method. Section 4.0

“Device Programming – Enhanced ICSP” describes

the Run-Time Self-Programming (RTSP) method.

Note: The address of Special Function Register,

TBLPAG, has changed from 0x32 to 0x54

in PIC24FJXXXDA1/DA2/GB2/GA3/GC0

family devices.

In those cases where legacy programming

specification code from other device

families is used as a basis to implement

the PIC24FJXXXDA1/DA2/GB2/GA3/GC0

families’ programming specification, spe-

cial care must be taken to ensure all

references to TBLPAG, in any existing

code, are updated with the correct opcode

hex data for the mnemonic and operands

(as shown below).

PIC24FJXXXDA1/DA2/GB2/GA3/GC0 Families

All Other PIC24F Families

Command

(Binary)

Data

(Hex) Description

0000 MOV W0, TBLPAG 8802A0

Command

(Binary)

Data

(Hex) Description

0000 MOV W0, TBLPAG 880190

PIC24F Devices

Programmer Programming

Executive

On-Chip Memory

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	PIC24FJ128GC010

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PIC24FJ128GC010 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip HS12-100D0/12DS2F Manual

18 Februar 2025

Microchip HSA0-040SDA/A0SA10 Manual

18 Februar 2025

Microchip HSA0-040SIA/A0S1F Manual

18 Februar 2025

Microchip HT12-100S0s/12ST25 Manual

17 Februar 2025

Microchip EMC2103-2 Manual

17 Februar 2025

Microchip EMC1047 Manual

17 Februar 2025

Microchip HCS201 Manual

17 Februar 2025

Microchip LE9653 Manual

17 Februar 2025

Microchip LAN7430 Manual

17 Februar 2025

Microchip HCS500 Manual

17 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025