Microchip PIC24FJ256GB610 Manual

Microchip Ikke kategoriseret PIC24FJ256GB610

Læs gratis den danske manual til Microchip PIC24FJ256GB610 (74 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Microchip PIC24FJ256GB610, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/74
2007-2015 Microchip Technology Inc. DS70000195G-page 1
HIGHLIGHTS
This section of the manual contains the following major topics:
1.0 Introduction ....................................................................................................................... 2
2.0 I
2
C Bus Characteristics..................................................................................................... 4
3.0 Control and Status Registers ............................................................................................ 8
4.0 Enabling I
2
C Operation ................................................................................................... 18
5.0 Communicating as a Master in a Single Master Environment ........................................ 20
6.0 Communicating as a Master in a Multi-Master Environment .......................................... 34
7.0 Communicating as a Slave ............................................................................................. 37
8.0 Connection Considerations for I
2
C Bus .......................................................................... 61
9.0 Operation in Power-Saving Modes ................................................................................. 63
10.0 Peripheral Module Disable (PMDx) Registers ................................................................ 63
11.0 Effects of a Reset............................................................................................................ 63
12.0 Constant-Current Source ................................................................................................ 64
13.0 Register Maps................................................................................................................. 66
14.0 Design Tips ..................................................................................................................... 67
15.0 Related Application Notes............................................................................................... 68
16.0 Revision History .............................................................................................................. 69
Inter-Integrated Circuit (I2C)
dsPIC33/PIC24 Family Reference Manual
DS70000195G-page 2 2007-2015 Microchip Technology Inc.
This document supersedes the following PIC24 and dsPIC
®
DSC Family Reference Manual sections:
1.0 INTRODUCTION
The Inter-Integrated Circuit (I
2
C) module is a serial interface useful for communicating with other
peripheral or microcontroller (MCU) devices. The external peripheral devices may be serial
EEPROMs, display drivers, Analog-to-Digital Converters (ADC) and so on.
The I
2
C module can operate as any one of the following in the I
2
C system:
• Slave device
• Master device in a single master system (slave may be active)
• Master or slave device in a multi-master system (bus collision detection and arbitration are
available)
The I
2
C module contains an independent I
2
C master logic and a I
2
C slave logic, which generates
interrupts based on their events. In the multi-master systems, the user software is simply
partitioned into the master controller and the slave controller.
When the I
2
C master logic is active, the slave logic also remains active, detecting the state of the
bus and potentially receiving messages from itself in a single master system or from the other
masters in a multi-master system. No messages are lost during the multi-master bus arbitration.
In a multi-master system, the bus collision conflicts with the other masters in the system when
detected, and the module provides a method to terminate and then restart the message.
The I
2
C module contains a Baud Rate Generator (BRG). The I
2
C BRG does not consume other
timer resources in the device. Figure 1-1 illustrates the I
2
C module block diagram.
Key features of the I
2
C module include the following:
• Independent master and slave logic
• Multi-master support which prevents message losses in arbitration
• Detects 7-bit and 10-bit device addresses with configurable address masking in Slave mode
• Detects general call addresses as defined in the I
2
C protocol
• Bus Repeater mode, allowing the module to accept all messages as a slave, irrespective of
the address
• Automatic SCLx clock stretching provides delays for the processor to respond to a slave
data request
• Supports 100 kHz and 400 kHz bus specifications
• Supports the Intelligent Platform Management Interface (IPMI) standard
• Supports SDAx hold time for SMBus (300 nS or 150 nS) in Slave mode
Note: This family reference manual section is meant to serve as a complement to device
data sheets. Depending on the device variant, this manual section may not apply to
all PIC24 and dsPIC33 devices.
Please consult the note at the beginning of the “Inter-Integrated Circuit (I
2
C)”
chapter in the current device data sheet to check whether this document supports
the device you are using.
Device data sheets and family reference manual sections are available for
download from the Microchip Worldwide Web site at:
http://www.microchip.com
DS Number Section Number Title
DS70195 19 dsPIC33F/PIC24H Family Reference Manual
DS70330 19 dsPIC33E/PIC24E Family Reference Manual
DS39702 24 PIC24F Family Reference Manual
DS70235 19 PIC24H Family Reference Manual
DS70068 21 dsPIC30F Family Reference Manual
Note:
For more information, refer to the SDAHT bit description in the specific device data sheet.

Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: PIC24FJ256GB610

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PIC24FJ256GB610 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Microchip Manualer

Microchip

Microchip AT7913 Manual

1 September 2025
Microchip

Microchip ATmega1281 Manual

19 Juli 2025
Microchip

Microchip ATtiny461 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D3 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D4 Manual

19 Juli 2025
Microchip

Microchip ATTINY28 Manual

19 Juli 2025
Microchip

Microchip ATTINY861 Manual

19 Juli 2025
Microchip

Microchip ATmega1280 Manual

19 Juli 2025
Microchip

Microchip ATtiny84A Manual

19 Juli 2025
Microchip

Microchip ATmega645P Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektrobock

Elektrobock PT44 Manual

14 September 2025
BSS Audio

BSS Audio FDS-366T Manual

14 September 2025
Systemair

Systemair Airline R-114 Manual

14 September 2025
IFM

IFM SU2031 Manual

14 September 2025
Morel

Morel Tempo Ultra Integra 502 Manual

14 September 2025
IMC Networks

IMC Networks 232CL9R Manual

14 September 2025
Varta

Varta Speed Charger 57955 Manual

14 September 2025
Melissa & Doug

Melissa & Doug 9336 Manual

14 September 2025
Opus

Opus dataPREDATOR Manual

13 September 2025
Varta

Varta Wireless Power Bank 20000 57909 Manual

13 September 2025