Microchip PIC32CM5164LE00048 Manual

Microchip Ikke kategoriseret PIC32CM5164LE00048

Læs nedenfor 📖 manual på dansk for Microchip PIC32CM5164LE00048 (43 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/43
User's Guide
Atmel START to MPLAB Harmony 3 Migration Guide
Introduction
This document describes the different steps to consider when porting an embedded application from Atmel
® START
to the MPLAB® Harmony 3 framework. It covers the following migration aspects:
How to create a MPLAB Harmony 3 project under MPLAB X IDE and navigate through the MPLAB Harmony
Configurator (MHC).
How to identify different elements that compose a project under Atmel START.
How to port the system/driver/middleware configuration using MPLAB Harmony Configurator.
Important aspects to consider when porting the project application layer.
To illustrate these aspects, this document references the example available on AtmelSAM D21 IO1 Xplained demo
START. Prior starting the migration process, ensure that the following prerequisites are met:
Internet connection with access to https://start.atmel.com
Latest version of MPLAB X IDE https://www.microchip.com/mplab/mplab-x-ide
Latest version of MPLAB Harmony 3 https://github.com/Microchip-MPLAB-Harmony
SAM D21 Xplained Pro board (optional)
I/O1 Xplained Pro board (optional)
© 2019 Microchip Technology Inc. DS70005413A-page 1
Figure 1-2. Creating an MPLAB Harmony 3-Based New Project
4. Click .Next
5. Select Framework Selection, and under Manage Framework section, enter Framework Path (Path to the folder
in which the MPLAB Harmony 3 packages are downloaded). For this demonstration, the MPLAB Harmony 3
packages are already downloaded at D:\microchip\github\h3.
Figure 1-3. New Project - Framework Selection
6. Click .Next
7. Select Project Settings, and under Name and Location section enter MPLAB Harmony 3 new project details:
Location: Indicates the path to the root folder of the new project. All project files will be placed inside this
folder.
Folder: Indicates the name of the MPLAB X IDE folder.
Name: Enter name of the project. This name will be shown in the MPLAB X IDE.
Path: It is read-only box. It will update as and when users make changes to other entries.
User's Guide
Creating MPLAB Harmony 3 Project Under MPLAB X ...
© 2019 Microchip Technology Inc. DS70005413A-page 4
Figure 3-3. Access Driver Configuration in Atmel START
ADC peripheral Library (IO1_LIGHT_SENS) configuration.
User's Guide
Porting Driver Configuration from Atmel ST...
© 2019 Microchip Technology Inc. DS70005413A-page 14
Figure 3-5. Port SERCOM3 Driver Configuration
SERCOM2 peripheral Library (I2C) configuration
User's Guide
Porting Driver Configuration from Atmel ST...
© 2019 Microchip Technology Inc. DS70005413A-page 16
Figure 5-2. Identify Project Clock Configuration Under Atmel START
Note:  Additional information on the settings for a specific clock element can be retrieved by clicking on the
associated blue gear wheel button.
Figure 5-3. Access Clock Element Settings Under Atmel START
2. To open the project pin configurator interface, in MPLAB X IDE, select MHC > Tools > Clock Configuration.
User's Guide
Porting the System Clock Configuration from ...
© 2019 Microchip Technology Inc. DS70005413A-page 27
Figure 5-10. SERCOM3 Peripheral Configuration Port
User's Guide
Porting the System Clock Configuration from ...
© 2019 Microchip Technology Inc. DS70005413A-page 34


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: PIC32CM5164LE00048

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PIC32CM5164LE00048 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer