Microchip PIC32CX5109BZ31048 Manual

Microchip Ikke kategoriseret PIC32CX5109BZ31048

Læs gratis den danske manual til Microchip PIC32CX5109BZ31048 (34 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Microchip PIC32CX5109BZ31048, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/34

User Guide

DS50003629A - 1

Introducon

This user guide provides detailed information about using the Microchip Radio Test 3 tool (MCHPRT3) with

the Microchip PIC32CX-BZ3. The MCHPRT3 enables the user to evaluate and demonstrate the RF performance,

calibration and functionalities of the PIC32CX-BZ3.

Note: In this user guide, the MCHPRT3 tool with the PIC32 WBZ351 Curiosity Board is only shown as an

example.

The MCHPRT3 is intended for development purposes. Any production test must use either a third-party

production tool or users must develop their own production tool based on the MCHPRT3 CLI or DLL release.

Features

• DLL Version – DLL Information and Firmware Support Version

• COM PORT – COM Port Information and Conguration

• Baud Rate – 115200 (Default Value)

• RF Bluetooth® – Bluetooth Low Energy RF Parameter Conguration and Information

• RF ZB – Zigbee® RF Parameter Conguration and Information

• MAC Address Information and Conguration

• IB File – Read or Save Information Block (IB) File

• Calibration Information and Conguration

• GPIO Information and Conguration

For more details, refer to .

4. Getting Started

PIC32CX-BZ3 MCHPRT3 User Guide

PIC32CX-BZ3

User Guide

DS50003629A - 2

Table of Contents

Introduction ..........................................................................................................................................................................1

Features ................................................................................................................................................................................ 1

1. Quick References ..........................................................................................................................................................3

1.1. Hardware Prerequisites.....................................................................................................................................3

1.2. Software Prerequisites...................................................................................................................................... 3

1.3. Acronyms and Abbreviations............................................................................................................................3

2. Overview.........................................................................................................................................................................4

3. MPLAB X IDE HUT Code Programming Process ........................................................................................................6

4. Getting Started...............................................................................................................................................................8

4.1. Getting Started with MCHPRT3........................................................................................................................ 9

4.2. Getting Started with MCHPRT3 PIC32CX-BZ3 GUI ...................................................................................... 11

4.3. MCHPRT3 PIC32CX-BZ2 GUI Demonstration ...............................................................................................12

5. Document Revision History........................................................................................................................................30

Microchip Information....................................................................................................................................................... 31

The Microchip Website............................................................................................................................................... 31

Product Change Service........................................................................................................................ 31Notication

Customer Support.......................................................................................................................................................31

Microchip Devices Code Protection Feature............................................................................................................ 31

Legal Notice..................................................................................................................................................................31

Trademarks.................................................................................................................................................................. 32

Quality Management System.....................................................................................................................................33

Worldwide Sales and Service.....................................................................................................................................34