Microchip PL360G55CB-EK Manual

Microchip Ikke kategoriseret PL360G55CB-EK

Læs gratis den danske manual til Microchip PL360G55CB-EK (46 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Microchip PL360G55CB-EK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/46

PL360G55CB-EK

PL360G55CB-EK User Guide

Introduction

PL360G55CB-EK is an evaluation kit for the PL360 modem. PL360 is a programmable modem for

narrow-band Power Line Communication (PLC) from Microchip Technology Inc, able to run any PLC

protocol in the frequency band below 500 kHz. The PL360 has been conceived to be driven by external

Microchip host controller devices; in this case a SAMG55 ARM® Cortex®-M4 RISC processor is used. The

Microchip host device loads the corresponding PLC-protocol firmware and then controls the PL360

modem operation.

The PL360G55CB-EK board has been conceived to communicate in CENELEC B-Band (95 kHz to 125

kHz) and it complies with CENELEC standard EN 50065 regulations and Smart Energy applications. It

can be connected directly to AC mains or DC power rails.

Contents

• Welcome letter

• Board:

– One PL360G55CB-EKv2 board

• Cable:

– One Micro A/B-type USB cable

• Jumpers:

– Two jumpers with pitch 1.27 mm

• Pin Headers:

– Two 8-pin headers with pitch 2.54 mm

Features

• PL360G55CB-EK board mounts a PL360 PLC transceiver and a SAMG55J19 ARM Cortex M4

microcontroller.

• PL360G55CB-EK board provides a full featured platform to develop a complete communications

system based on PLC technology working in CENELEC B-Band.

• PL360 is a compact and highly efficient device for a wide range of Smart Grid applications such as

lighting control, industrial/home automation and renewable-energy management, among others.

• PL360G55CB-EK board provides support for:

– PLC band characterization and noise level measurement

– PLC sensitivity level measurement

– Power consumption

– Power fail detection

• PL360G55CB-EK board includes a SWD/JTAG interface for MCU debugging and programming

purposes. Firmware is also upgradable via USB/serial interface

• USB 2.0 full-speed interface

• mikroBUS™ add-on connectors to integrate the board itself as a module for interfacing with other

microcontrollers or microprocessors (mikroBUS main board).

• PL360G55CB-EK board can be externally supplied by:

– mikroBUS connector

– Micro-B USB connector

– DC Jack connector

PL360G55CB-EK

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	PL360G55CB-EK

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PL360G55CB-EK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip AT7913 Manual

1 September 2025

Microchip ATmega1281 Manual

19 Juli 2025

Microchip ATtiny461 Manual

19 Juli 2025

Microchip ATxmega128D3 Manual

19 Juli 2025

Microchip ATxmega128D4 Manual

19 Juli 2025

Microchip ATTINY28 Manual

19 Juli 2025

Microchip ATTINY861 Manual

19 Juli 2025

Microchip ATmega1280 Manual

19 Juli 2025

Microchip ATtiny84A Manual

19 Juli 2025

Microchip ATmega645P Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektrobock PT44 Manual

14 September 2025

BSS Audio FDS-366T Manual

14 September 2025

Systemair Airline R-114 Manual

14 September 2025

IFM SU2031 Manual

14 September 2025

Morel Tempo Ultra Integra 502 Manual

14 September 2025

IMC Networks 232CL9R Manual

14 September 2025

Varta Speed Charger 57955 Manual

14 September 2025

Melissa & Doug 9336 Manual

14 September 2025

Opus dataPREDATOR Manual

13 September 2025

Varta Wireless Power Bank 20000 57909 Manual

13 September 2025