Microchip PL460-EK Manual

Microchip Ikke kategoriseret PL460-EK

Læs gratis den danske manual til Microchip PL460-EK (39 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Microchip PL460-EK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/39

EV13L63A

PL460-EK User Guide

Introduction

PL460-EK (EV13L63A) is an Xplained PRO extension board featuring a PL460 modem that embeds a PLC signal

amplification stage, providing a highly integrated solution that reduces the total bill of materials, simplifies the layout

and eases the modem design. This board enables the user to evaluate the PL460 device performance.

The PL460 was conceived to be driven by external Microchip host devices, thus providing an additional level of

flexibility on the host side. The Microchip host device loads the proper PLC-protocol firmware in the PL460, then

controls the modem operation. PL460-EK uses an Xplained PRO client connector to communicate with the host

microcontroller (i.e., PIC32CXMT family of EK/DBs, SAM4CMx-DB family, SAME70-Xplained or SAMG55-Xplained

boards).

The PL460-EK is a client companion board for the PIC32CXMT family of EK/DBs, SAM4CMx-DB family, SAME70-

Xplained and SAMG55-Xplained boards. All these boards include an Xplained PRO (host) connector, and the

PL460-EK includes an Xplained PRO connector accordingly (client).

Contents

• One PL460-EK board in an enclosure

• One Power Supply adapter (AC/DC) 15 Vdc with interchangeable plugs

Features

• The PL460-EK board includes a PL460, a programmable modem for narrow-band Power Line Communication

(PLC), able to run any PLC protocol in the frequency band below 500 kHz.

• The PL460-EK board implements a PLC multiband configuration: in FCC band, using the main transmission

branch with the embedded PLC driver and CENELEC A-Band using the auxiliary transmission branch with

discrete components.

• Client Xplained PRO header connector (J2) to interface with other boards.

• The PL460-EK board needs two different power supplies. One power supply of 3.3V coming from the Xplained

PRO header connector (J2) and the other one of 15V coming from the DC Jack connector (J4).

and its subsidiaries

User Guide DS50003322B-page 1

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	PL460-EK

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PL460-EK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip M2GL060 Manual

2 December 2025

Microchip RTPF500TS Manual

2 December 2025

Microchip M1A3P600L Manual

1 December 2025

Microchip M2S090TS Manual

1 December 2025

Microchip M1A3P1000L Manual

1 December 2025

Microchip M2S090 Manual

30 November 2025

Microchip A3PE3000L Manual

30 November 2025

Microchip HC12-100S0s Manual

30 November 2025

Microchip M2GL010T Manual

29 November 2025

Microchip M2GL150T Manual

29 November 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vinotemp BR-RETRO-01-W Manual

17 December 2025

NightStick INTRANT XPP-5566RX Manual

17 December 2025

Vaxcel T0690 Manual

17 December 2025

Silverstone TS12 Manual

17 December 2025

TOTO Silas TS210P Manual

17 December 2025

Wine-Mate WM-8500DS Manual

17 December 2025

Arçelik A75L 8870 5B Manual

17 December 2025

Dals RWS48-CC Manual

17 December 2025

Vinotemp BR-30SSGG Manual

17 December 2025

Gamdias Aura GC1 Elite Manual

17 December 2025