Middle Atlantic Products 5CC43 Manual
Læs nedenfor 📖 manual på dansk for Middle Atlantic Products 5CC43 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 24 personer og blev bedømt med 4.0 stjerner i gennemsnit af 12.5 brugere
Side 1/2
I-0607 Rev E
QTY. DESCRIPTION
2 Cable Chase
1 Top Plate
(per model) Hex Head Bolts
(per model) Flange Nuts
HARDWARE
ASSEMBLY
NOTE:
When using with the door
option, install the lock tab
bracket (included with door) first.
When using with the rear rackrail
option, install the cable chase first
and then the rear rackrail, aligning
the rackrail mounting brackets with
the cable chase inside notches.
1) Install the cable chase on either
side of the rack using the
hardware provided. Ensure the
cable chase mounting flanges
are facing up.
2) Mount the top plate using
the provided flange nuts.
FLANGE NUTS
CABLE
CHASE
TOP PLATE
NOTCHES
FLANGES MUST BE FACING UP
HEX
BOLT
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the SLIM 5 Series Cable Chase to be free
from defects in material or workmanship under normal use and conditions for the lifetime of the
product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return
of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the
products purchased, or any part or parts thereof, which the Company has determined to be
defective after inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976
International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690
middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Page 2 30% Recycled Paper
Produkt Specifikationer
| Mærke: | Middle Atlantic Products |
| Kategori: | Ikke kategoriseret |
| Model: | 5CC43 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Middle Atlantic Products 5CC43 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Middle Atlantic Products Manualer
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret DreamGEAR
- Ikke kategoriseret Metra
- Ikke kategoriseret Logicom
- Ikke kategoriseret ASI
- Ikke kategoriseret Chrome-Q
- Ikke kategoriseret Florabest
- Ikke kategoriseret Palm
- Ikke kategoriseret Davita
- Ikke kategoriseret Elite Screens
- Ikke kategoriseret Childhome
- Ikke kategoriseret Jøtul
- Ikke kategoriseret Crock-Pot
- Ikke kategoriseret Realme
- Ikke kategoriseret Hotpoint Ariston
- Ikke kategoriseret Waterpik
Nyeste Ikke kategoriseret Manualer
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025