Middle Atlantic Products ICOMP-COOL-3 Manual

Middle Atlantic Products Ikke kategoriseret ICOMP-COOL-3

Læs gratis den danske manual til Middle Atlantic Products ICOMP-COOL-3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Middle Atlantic Products ICOMP-COOL-3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

I-00245 Rev B

m i d d l e a t l a n t i c . c o m

THANK YOU

Thank you for purchasing the Quiet-Cool Series™ ICOMP-COOL Component Cooler.

Please read these instructions thoroughly before installing this product.

PRODUCT FEATURES

- Extends equipment life.

- Removes heat directly from the source.

- Up to ten individual ICOMP-COOLs can

be run from one power supply. 3-1/8”

[79 mm]

3-3/16”

[81 mm]

5/8” [16 mm]

SPECIFICATIONS

MODEL POWER

REQUIREMENTS CFM dBA @ 1 METER

ICOMP-COOL 7.5 VDC @ 70mA 8

Per Fan 19

ICOMP-COOL-E 7.5 VDC @ 70mA 8

Per Fan

ICOMP-COOL-3 7.5 VDC @ 210mA 8

Per Fan

- Fan turns on at 87ºF [30.5ºC] and turns off at 85ºF [29.4ºC]

- LED illuminates green when fan activates, and

red when fan deactivates

LED

Page 2

middl ea tlan tic.co m

ea t

tic .

PARTS

FAN UNIT

QTY

- ICOMP-COOL 1

- ICOMP-COOL - 3 3

- ICOMP-COOL - E 0

ADHESIVE BACKED FEET

QTY

- ICOMP-COOL 8

- ICOMP-COOL - 3 24

- ICOMP-COOL - E 8

WIRE TIE MOUNT

- ICOMP-COOL 5

- ICOMP-COOL - 3 15

- ICOMP-COOL - E 5

QTY

POWER SUPPLY

QTY

- ICOMP-COOL 1

- ICOMP-COOL - 3 1

- ICOMP-COOL - E 0

WIRE TIE

- ICOMP-COOL 5

- ICOMP-COOL - 3 15

- ICOMP-COOL - E 5

QTY

JUMPER CORD

- ICOMP-COOL 0

- ICOMP-COOL - 3 2

- ICOMP-COOL - E 1

QTY

1) Locate the hot spot on your component. (FIGURE A)

2) Clean area with provided alcohol wipe.

3) Remove paper covering adhesive ring. (FIGURE B)

4) Position ICOMP-COOL with power jack facing rear of component.

(FIGURE C) Press down to adhere.

TIP: If your cabinet does not have doors or sides, you may prefer to

position the unit so the air flows in a different direction.

5) Select appropriate wall plug for your region and install in provided

power supply.

6) Connect ICOMP-COOL to power source using provided Power

Supply.

NOTE: Wire Ties and Wire Tie Mounts are provided for cable

management.

FIGURE A

ADHESIVE

RING

FIGURE B

FIGURE C

INSTALLATION

Produkt Specifikationer

Mærke:	Middle Atlantic Products
Kategori:	Ikke kategoriseret
Model:	ICOMP-COOL-3

Har du brug for hjælp?

Hvis du har brug for hjælp til Middle Atlantic Products ICOMP-COOL-3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Middle Atlantic Products Manualer

Middle Atlantic Products CBS-ERK-20R Manual

1 September 2024

Middle Atlantic Products SH-5A-26 Manual

1 September 2024

Middle Atlantic Products DT-VFD-7 Manual

1 September 2024

Middle Atlantic Products RK-RR16 Manual

1 September 2024

Middle Atlantic Products PFD-27 Manual

1 September 2024

Middle Atlantic Products FD-27 Manual

1 September 2024

Middle Atlantic Products RK-RAP16 Manual

1 September 2024

Middle Atlantic Products SH-WR Manual

1 September 2024

Middle Atlantic Products ICOMP-COOL Manual

1 September 2024

Middle Atlantic Products ICAB-COOL50 Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Varta Wireless Charger Multi 57906 Manual

13 September 2025

IFM DV1203 Manual

13 September 2025

SolarEdge SE90K-SYNERGY-SET Manual

13 September 2025

TriStar PD-3817E Manual

13 September 2025

IFM DV1200 Manual

13 September 2025

Ibm System Storage N3220 Manual

13 September 2025

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025