Midea MDW15SBS Manual

Midea Opvaskemaskine MDW15SBS

Læs nedenfor 📖 manual på dansk for Midea MDW15SBS (48 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 27 personer og blev bedømt med 4.7 stjerner i gennemsnit af 14 brugere

Download PDF

Side 1/48

PART Ⅰ: Generic Version

MDW15SSS / MDW15SWH / MDW15SBS

Please read this manual carefully

before using the dishwasher and

Keep this manual for future reference.

SAFETY INFORMATION

CONTENTS

PRODUCT OVERVIEW

USING YOUR DISHWASHER

Basket Used Tips

MAINTENANCE AND CLEANING

External Care

Internal Care

Caring For The Dishwasher

INSTALLATION INSTRUCTION

About Power Connection

Water Supply And Drain

Connection Of Drain Hoses

Position The Appliance

Free Standing Installation

Built-In Installation(for the integrated model)

TROUBLESHOOTING TIPS

28 LOADING THE BASKETS ACCORDING TO AS/NZS 2007.1

NOTE:

Reviewing the section on troubleshooting Tips will help you solve some

common problems by yourself.

If you cannot solve the problems by yourself, please ask for help from a

professional technician.

The manufacturer, following a policy of constant development and updating of

the product, may make modifications without giving prior notice.

If lost or out-of-date, you can receive a new user manual from the manufacturer

or responsible vendor.

30 Cutlery Rack Used Tips

SAFETY INFORMATION

WARNING

When using your dishwasher , follow the

precautions listed below:

Installation and repair can only be carried out by a

qualified technician

This appliance is intended to be used in household

and similar applications such as:

-staff kitchen areas in shops, offices and other

working environments;

-farm houses;

-by clients in hotels, motels and other residential type

environments;

-bed and breakfast type environments.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be done by children

without supervision. (For EN60335-1)

This appliance is not intended for use by persons

(including children ) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a

person responsible for their safety. (For IEC60335-1 )

Packaging material could be dangerous for children!

This appliance is for indoor household use only.

To protect against the risk of electrical shock, do not

immerse the unit, cord or plug in water or other liquid.

Please unplug before cleaning and performing

maintenance on the appliance.

Use a soft cloth moistened with mild soap, and then

use a dry cloth to wipe it again.

Earthing Instructions

This appliance must be earthed. In the event of a

malfunction or breakdown, earthing will reduce the

risk of an electric shock by providing a path of least

resistance of electric current. This appliance is

equipped with an earthing conductor plug.

The plug must be plugged into an appropriate

outlet that is installed and earthed in accordance

with all local codes and ordinances.

Improper connection of the equipment-earthing

conductor can result in the risk of an electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

Folding back the cup shelves

To make room for taller items in the upper basket, raise the cup rack upwards.

You can then lean the tall glasses against it. You can also remove it when it is not

required for use.

Folding back the rack shelves

The spikes of the lower basket are used for holding plates and a platter.

They can be lowered to make more room for large items.

raise upwards fold backwards

1To raise the

the upper basket at the center of

each side until the basket locks into

place in the upper position. It is not

necessary to lift the adjuster handle.

upper basket just lift ,2To lower the lift the

adjust handles on each side to

release the basket and lower it to

the lower position.

upper basket,

Type 2:

MAINTENANCE AND CLEANING

External Care

The door and the door seal

Clean the door seals regularly with a soft damp cloth to remove food deposits.

When the dishwasher is being loaded, food and drink residues may drip onto the

sides of the dishwasher door. These surfaces are outside the wash cabinet and are not

accessed by water from the spray arms. Any deposits should be wiped off before the

door is closed.

The control panel

If cleaning is required, the control panel should be wiped with a soft damp cloth only.

To avoid penetration of water into the door lock and electrical components,

do not use a spray cleaner of any kind.

Never use abrasive cleaners or scouring pads on the outer surfaces because

they may scratch the finish. Some paper towels may also scratch or leave

marks on the surface.

WARNING

Internal Care

Filtering system

The filtering system in the base of the wash cabinet retains coarse debris from the

washing cycle. The collected coarse debris may cause the filters to clog. Check the

condition of the filters regularly and clean them if necessary under running water.

Follow the steps below to clean the filters in the wash cabinet.

NOTE:

Pictures are only for reference, different models of the filtering system and spray

arms may be different.

1 2Hold the coarse filter and rotate it

anticlockwise to unlock the filter.

Lift the filter upwards and out of

the dishwasher.

The fine filter can be pulled off the

bottom of the filter assembly.

The coarse filter can be detached

from the main filter by gently

squeezing the tabs at the top and

pulling it away.

3 4

Larger food remnants can be

cleaned by rinsing the filter under

running water.

For a more thorough clean, use a

soft cleaning brush.

Reassemble the filters in the reverse

order of the disassembly, replace the

filter insert, and rotate clockwise to

the close arrow.

Do not over tighten the filters. Put the filters back in sequence securely,

otherwise coarse debris could get into the system and cause a blockage.

Never use the dishwasher without filters in place. Improper replacement of

the filter may reduce the performance level of the appliance and damage

dishes and utensils.

WARNING

Main filter

Main filter Main filter

Coarse filter

Coarse filterCoarse filter

Fine filter

Open

OpenOpen

Spray arms

Wash the arms in soapy and warm

water and use a soft brush to clean

the jets. Replace them after rinsing

them thoroughly.

It is necessary to clean the spray arms regularly for hard water chemicals will clog the

spray arm jets and bearings.

To clean the spray arms, follow the instructions below:

To remove the lower spray arm, pull

out the spray arm upward.

1To remove the upper spray arm,

hold the nut in the center still and

rotate the spray arm counterclockwise

to remove it.

Caring For The Dishwasher

Frost precaution

Please take frost protection measures on the dishwasher in winter. Every time after

washing cycles, please operate as follows:

1. Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filter at the bottom of the tub and use a sponge to soak up water in

the sump.

After every wash

After every wash, turn off the water supply to the appliance and leave the door slightly

open so that moisture and odors are not trapped inside.

Remove the plug

Before cleaning or performing maintenance, always remove the plug from the socket.

No solvents or abrasive cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or

abrasive cleaning products. Only use a cloth with warm soapy water.

To remove spots or stains from the surface of the interior, use a cloth dampened with

water an a little vinegar, or a cleaning product made specifically for dishwashers.

When not in use for a longtime

It is recommend that you run a wash cycle with the dishwasher empty and then

remove the plug from the socket, turn off the water supply and leave the door of the

appliance slightly open. This will help the door seals to last longer and prevent odors

from forming within the appliance.

Moving the appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely

necessary, it can be positioned on its back.

Seals

One of the factors that cause odours to form in the dishwasher is food that remains

trapped in the seals. Periodic cleaning with a damp sponge will prevent this from

occurring.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed properly. If

the electrical socket to which the appliance must be connected is not appropriate for

the plug, replace the socket, rather than using a adaptors or the like as they could

cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Connection Of Drain Hoses

Please securely fix the drain hose in either position A or position B

MAX 1000mm

Counter

Drain hose

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it

run into the sink, making sure to avoid bending or crimping it. The height of drain

pipe must be less than 1000mm. The free end of the hose must not be immersed in

water to avoid the back flow of it.

Extension hose

Water outlet

How to drain excess water from hoses

Syphon connection

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained

directly into the sink. It will be necessary to drain excess water from hoses into a bowl

or suitable container that is held outside and lower than the sink.

Connect the water drain hose. The drain hose must be correctly fitted to avoid water

leaks. Ensure that the water drain hose is not kinked or squashed.

The waste connection must be at a height less than 1000mm (maximum) from the

bottom of the dish. The water drain hose should be fixed .

If you need a drain hose extension, make sure to use a similar drain hose.

It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher

could be reduced.

Back of dishwasher

Water Inlet

Drain Pipe

Mains Cable

Underneath existing work top

(When fitting beneath a work top)

In most modern fitted kitchens there is only one

single work top under which cabinets and

electrical appliances are fitted. In this case remove

the work top of the dishwasher by unscrewing the

screws under the rear edge of the top ( ).a

Built-In Installation(for the integrated model)

Step 1. Selecting the best location for the dishwasher

The installation position of dishwasher should be near the existing inlet and drain hoses

and power cord.

Illustrations of cabinet dimensions and installation position of the dishwasher.

1. Less than 5 mm between the top of dishwasher and cabinet and the outer door

aligned to cabinet.

90 ° 90 °

580mm

580mm580mm

820mm

820mm820mm

100

100100

Electrical, drain

and water supply

line entrances

Electrical, drain

and water supply

line entrances

Space between cabinet

bottom and floor

Space between cabinet

bottom and floor

600 mm( )for 60cm model

450 ( )mm for 45cm model

8080

After removing the work top, the screws must be screwed again under the rear edge

of the top ( ).b

Attention

The height will then be reduced to 815 mm, as scheduled by the International

Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top

Step 2. Aesthetic panel's dimensions and installation

2. If dishwasher is in stalled at the corner of the cabinet,

there should be some space when the door is opened.

CabinetDishwasher

Door of

dishwasher

Minimum space

of 50mm

NOTE:

Depending on where your electrical outlet is, you may need to cut a hole in the

opposite cabinet side.

The aesthetic wooden panel could be processed according to the

installation drawings.

The aesthetic wooden panel could be processed according to the

installation drawings.

Magical paster

Magical paster A and magical paster B be disjoinedon, magical paster A on the

aesthetic wooden panel and felted magical paster B of the outer door of dishwasher

(see figure A). After positioning of the panel, fix the panel onto the outer door by

screws and bolts (See figure B) .

Semi-integrated model

2 Pin up the four long screws .

1 Take away the four short screws .

Step 3. Tension adjustment of the door spring

1. The door springs are set at the factory to

the proper tension for the outer door. If

aesthetic wooden panel are installed, you

will have to adjust the door spring tension.

Rotate the adjusting screw to drive the

adjustor to strain or relax the steel cable.

2. Door spring tension is correct when the

door remains horizontal in the fully opened

position, yet rises to a close with the slight

lift of a finger.

Install the hook on the aesthetic wooden panel and put the hook into the slot of the

outer door of dishwasher (see figure A). After positioning of the panel, fix the panel

onto the outer door by screws and bolts (See figure B).

2 Pin up the four long screws .

A1 Take away the four short screws .

Full-integrated model

Step 4. Dishwasher installation steps

1. Affix the condensation strip under the work surface of cabinet. Please ensure the

condensation strip is flush with edge of work surface. (Step 2)

2. Connect the inlet hose to the cold water supply.

3. Connect the drain hose.

4. Connect the power cord.

5. Place the dishwasher into position. (Step 4)

6. Level the dishwasher. The rear food can be adjusted from the front of the

dishwasher by turning the Philips screw in the middle of the base of dishwasher

use an Philips screw. To adjust the front feet, use a flat screw driver and turn the

front feet until the dishwasher is level. (Step 5 to Step 6)

7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)

8. Adjust the tension of the door springs by using an Allen key turning in a clockwise

motion to tighten the left and right door springs. Failure to do this could cause

damage to your dishwasher. (Step 11)

9. The dishwasher must be secured in place. There are two ways to do this:

A. Normal work surface: Put the installation hook into the slot of the side plane and

secure it to the work surface with the wood screws.

B. Marble or granite work top: Fix the side with Screw.

Please refer to the specified installation steps in the installation

drawings.

Please refer to the specified installation steps in the installation

drawings.

DOWN

Check level

front to back

Check level

side to side

Step 5. Levelling the dishwasher

Dishwasher must be level for proper dish rack operation and wash performance.

Place a spirit level on door and rack track inside the tub as shown to check that the

dishwasher is level.

Level the dishwasher by adjusting the three levelling legs individually.

When level the dishwasher, please pay attention not to let the dishwasher tip over.

The maximum adjustment height of the feet is 50 mm.

NOTE:

TROUBLESHOOTING TIPS

Before Calling For Service

Reviewing the charts on the following pages may save you from calling for service.

Problem Possible Causes What To Do

Dishwasher doesn't

start

Fuse blown, or the

circuit break tripped.

Replace fuse or reset circuit breaker.

Remove any other appliances sharing

the same circuit with the dishwasher.

Power supply is not

turned on.

Make sure the dishwasher is turned

on and the door is closed securely.

Make sure the power cord is properly

plugged into the wall socket.

Check that the water supply is

connected properly and the water

is turned on.

Door of dishwasher

not properly closed.

Make sure to close the door

properly and latch it.

Water not pumped

form dishwasher

Twisted or trapped

drain hose.

Filter clogged.

Kitchen sink clogged.

Check the drain hose.

Check coarse the filter.

Check the kitchen sink to make sure

it is draining well. If the problem is

the kitchen sink that is not draining,

you may need a plumber rather than

a serviceman for dishwashers.

Suds in the tub Wrong detergent.

Water pressure is low

Use only the special dishwasher

detergent to avoid suds. If this occurs,

open the dishwasher and let suds

evaporate. Add 1 gallon of cold water

to the bottom of the dishwasher.

Close the dishwasher door, then select

any cycle. Initially, the dishwasher will

drain out the water. Open the door

after draining stage is complete and

check if the suds have disappeared.

Repeat if necessary.

Spilled rinse-aid. Always wipe up rinse-aid spills

immediately.

Stained tub interior Detergent with

colourant may

have been used.

Make sure that the detergent has no

colourant.

White film on

inside surface

Hard water minerals. To clean the interior, use a damp

sponge with dishwasher detergent

and wear rubber gloves. Never use

any other cleaner than dishwasher

detergent otherwise, it may cause

foaming or suds.

There are rust

stains on cutlery

The affected items

are not corrosion

resistant.

Problem Possible Causes What To Do

The items should be corrosion

resistant.

Knocking noise in

the dishwasher

A spray arm is knocking

against an item in a

basket

Interrupt the program and

rearrange the items which are

obstructing the spray arm.

Rattling noise in

the dishwasher

Items of crockery

are loose in the

dishwasher.

Interrupt the program and

rearrange the items of crockery.

Knocking noise in

the water pipes

This may be caused

by on-site installation

or the cross-section

of the piping.

This has no influence on the

dishwasher function. If in doubt,

contact a qualified plumber.

The dishes are

not clean

The dishes were not

loaded correctly.

See notes in “Loading & unloading

your dishwasher”.

The program was

not powerful enough.

Select a more intensive program.

1.Upper basket:

2.Lower basket:

Glasses

Saucers

Cups

ItemNumber

Dinner plates

Soup plates

Dessert dishes

ItemNumber

LOADING THE BASKETS

ACCORDING TO AS/NZS 2007.1:

111

665

444

666

3.Cutlery basket:

Information for comparability tests in accordance with (*AS/NZS 2007.1 )

Capacity: 15 place settings

Position of the upper basket: lower position

Program: ECO

Rinse aid setting: 5

Detergent(Pre/main): 5g/28.7g

Door is open at the end of the drying cycle for the drying performance test

(Door position: Open 50 mm)

2 51 43

Forks

Soup spoons

Dessert spoons

Teaspoons

Knives

ItemNumber

PART Ⅱ: Special Version

MDW15SSS / MDW15SWH / MDW15SBS

Please read this manual carefully

before using the dishwasher and

Keep this manual for future reference.

CONTENTS

ERROR CODES

NOTE:

PROGRAMMING THE DISHWASHER

Wash Cycle Table

Starting A Cycle Wash

Changing The Program Mid-cycle

Forget To Add A Dish?

USING YOUR DISHWASHER

TECHNICAL INFORMATION

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Generic Version.)Ⅰ:

Extra Cleaning

Extra CleaningExtra Cleaning

Extra Drying

Extra DryingExtra Drying

To wash very dirty, hard to clean dishes.(It can only be used

with Intensive, Heavy, ECO, Glass, 90 min)

To dry dishes more completely.(It can only be used

with Intensive, Heavy, ECO, Glass, 90 min)

Press this button to set the delayed hours for washing. You can

delay the start of washing up to 24 hours.

This option allows you to lock the buttons on the control panel

- except the Power button - so children cannot accidently start

the dishwasher by pressing the buttons on the panel.

To lock or unlock the buttons on the control panel, press and

hold the Half load button+Delay button for 3 seconds

simultaneously.

Press the button to select a function, corresponding indicator

will be lit. Two functions cannot be selected at the same time .

To start the selected washing program or pause it when the

dishwasher is working.

4 Delay

5 Child lock

Function6

Start/Pause7

Operation (Button)

8 Screen

To show the reminding time and delay time, error codes etc.

Water Faucet

Water FaucetWater Faucet

Rinse Aid

Rinse AidRinse Aid

If the “ ” indicator is lit, it means the dishwasher is low

on dishwasher rinse aid and requires a refill.

If the “ ” indicator is lit, it means the water faucet closed.

Display

Press the button to select either upper basket or lower basket

loaded, and the corresponding indicator will light up.

3Alt

Lower

LowerLower

When you select Lower, only the lower rack nozzle is

activated. The upper nozzle will not operate

Upper

UpperUpper

When you select Upper, only the upper rack nozzle is

activated.The lower nozzle will not operate.

Preparing And Loading Dishes

Consider buying utensils which are identified as dishwasher-proof.

For particular items, select a program with the lowest possible temperature.

To prevent damage, do not take glass and cutlery out of the dishwasher

immediately after the program has ended.

Cutlery with wooden, horn china or mother-of-pearl handles

Plastic items that are not heat resistant

Older cutlery with glued parts that are not temperature resistant

Bonded cutlery items or dishes

Pewter or cooper items

Crystal glass

Steel items subject to rusting

Wooden platters

Items made from synthetic fibres

Some types of glasses can become dull after a large number of washes

Silver and aluminum parts have a tendency to discolour during washing

Glazed patterns may fade if machine washed frequently

For washing the following cutlery/dishes

Are not suitable

Are of limited suitability

Items such as cups, glasses, pots/pans, etc. are faced downwards.

Curved items, or ones with recesses, should be loaded aslant so that water can run

off.

All utensils are stacked securely and can not tip over.

All utensils are placed in the way that the spray arms can rotate freely during

washing.

Recommendations for loading the dishwasher

Scrape off any large amounts of leftover food. Soften remnants of burnt food in

pans.It is not necessary to rinse the dishes under running water.

For best performance of the dishwasher, follow these loading guidelines.

(Features and appearance of baskets and cutlery baskets may vary from

your model.)

Place objects in the dishwasher in following way:

Load hollow items such as cups, glasses, pans etc. With the opening facing

downwards so that water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other.

To avoid damage, glasses should not touch one another.

The upper basket is designed to hold more delicate and lighter dishware such as

glasses, coffee and tea cups.

Long bladed knives stored in an upright position are a potential hazard!

Long and / or sharp items of cutlery such as carving knives must be positioned

horizontally in the upper basket.

Please do not overload your dishwasher. This is important for good results and for

reasonable consumption of energy.

NOTE:

Very small items should not be washed in the dishwasher as they could easily fall

out of the basket.

To prevent water dripping from the upper basket into the lower basket, we

recommend that you empty the lower basket first, followed by the upper basket.

Removing the dishes

WARNING

Items will be hot! To prevent damage, do not take glass and

cutlery out of the dishwasher for around 15 minutes after the

program has ended.

Loading the upper basket

The upper basket is designed to hold more delicate and

lighter dishware such as glasses, coffee and tea cups

and saucers, as well as plates, small bowls and shallow

pans (as long as they are not too dirty).Position the

dishes and cookware so that they will not get moved by

the spray of water.

Loading the lower basket

We suggest that you place large items and the most

difficult to clean items are to be placed into the lower

basket: such as pots, pans, lids, serving dishes and bowls,

as shown in the figure below. It is preferable to place

serving dishes and lids on the side of the racks in order to

avoid blocking the rotation of the top spray arm.

The maximum diameter advised for plates in front of the

detergent dispenser is of 19 cm, this not to hamper the

opening of it.

WARNING

Do not let any item extend through

the bottom.

Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

Cutlery should be placed in the cutlery rack separatelyfrom each other in the

appropriate positions, and do make sure the utensils do not nest together, this may

cause bad performance.

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART

loading options on last section of PART Generic Version

Generic Version

Ⅰ:

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Generic VersionⅠ:

The rinse aid is released during the final rinse to prevent water from forming droplets

on your dishes, which can leave spots and streaks. It also improves drying by allowing

water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids.

WARNING

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser

with any other substances (e.g. Dishwasher cleaning agent, liquid detergent).

This would damage the appliance.

Function Of The Rinse Aid And Detergent

Function of detergent

The chemical ingredients that compose the detergent are necessary to remove, crush and

dispense all dirt out of the dishwasher. Most of the commercial quality detergents are

suitable for this purpose.

WARNING

Proper Use of Detergent

Use only detergent specifically made for dishwashers use. Keep your detergent

fresh and dry.

Don't put powdered detergent into the dispenser until you are ready to wash

dishes.

Dishwasher detergent is corrosive!Keep dishwasher

detergent out of the reach of children.

When to refill the rinse aid

The regularity of the dispenser needing to be refilled depends on how often dishes are

washed and the rinse aid setting used.

The Low Rinse Aid indicator ( ) will be lit when more rinse aid is needed.

Do not overfill the rinse aid dispenser.

Filling The Rinse Aid Reservoir

3Close the cap after all.

Remove the rinse reservoir cap by

lifting up the handle .

Pour the rinse aid into the dispenser,

being careful not to overfill.

Adjusting the rinse aid reservoir

To achieve a better drying performance with limited rinse aid, the dishwasher is

designed to adjust the consumption by user. Follow the below steps.

1. .

2. Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds,

and then press the Delay Button to enter the set model, the rinse aid indication

blinks as 1Hz frequency.

3. Press the Start/Pause button to select the proper set according to your using habits ,

the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.

The higher the number, the more rinse aid the dishwasher uses.

4. Without operation in 5 seconds or press the Power button to exit the set model,

the set success.

Switch on the appliance

1Please choose an open way according

to the actual situation.

1. Open the cap by sliding the release

catch.

2. Open the cap by pressing down the

release catch.

Add detergent into the larger cavity

(A) for the main wash cycle .

For better cleaning result, especially if

you have very dirt items, pour a small

amount of detergent onto the door.

The additional detergent will activate

during the pre-wash phase.

3Close the flap by sliding it to the

front and then pressing it down.

Sliding it to the right

Press down

Filling The Detergent Dispenser

NOTE:

Be aware that depending on the soiling of water, setting may be different.

Please observe the manufacturer's recommendations on the detergent packaging.

Produkt Specifikationer

Mærke:	Midea
Kategori:	Opvaskemaskine
Model:	MDW15SBS

Har du brug for hjælp?

Hvis du har brug for hjælp til Midea MDW15SBS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine Midea Manualer

Midea JHDW143FS Manual

3 Marts 2025

Midea JHDW143WH Manual

3 Marts 2025

Midea JHDW143BK Manual

26 Februar 2025

Midea MDW 10E4 S Manual

12 Januar 2025

Midea MDWF2SS Manual

14 December 2024

Midea MFD60S101W Manual

6 December 2024

Midea MFD60S101X Manual

5 December 2024

Midea MFD60S230X-IT Manual

15 Oktober 2024

Midea MDWEF1433D Manual

1 Oktober 2024

Midea MDWEB1303MS-W Manual

20 September 2024

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

KitchenAid KDTE104KPS Manual

9 Juni 2025

9 Juni 2025

9 Juni 2025

8 Juni 2025

8 Juni 2025

Miele G 7156 SCVi XXL Manual

8 Juni 2025

Parmco DW6INT Manual

8 Juni 2025

Crosley CDMH2450TS Manual

8 Juni 2025

Whirlpool WIC3C26NUK Manual

8 Juni 2025

Crosley CDM2450TW Manual

8 Juni 2025