Midea RSJ-23 Manual

Midea Varmepumpe RSJ-23

Læs gratis den danske manual til Midea RSJ-23 (20 sider) i kategorien Varmepumpe. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Midea RSJ-23, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
INSTALLATION & OWNER’S MANUAL
Thank you very much for purchasing our product,
Before using your unit, please read this manual carefully and keep it for future reference.
ALL IN ONE Type Air-source Heat Pump Water Heater
HOT WATER CAN BE DANGEROUS
Warning – Hot water burns. As a safety precaution, young children should always be supervised around
hot water fixtures.
Heat pump water heaters can store water at temperatures that can cause scalding. Water temperatures
over 50°C can scald and care needs to be taken to ensure that injuries do not occur through incorrect
use of your water heater.
As heat pump water heaters can generate water temperatures in excess of 60°C, regulations require
that a tempering valve be fitted to the heater to prevent water temperatures going to the home
exceeding a preset safe maximum. The tempering valve must be connected to the hot water outlet line
from the water heater. The valve must be fitted by an authorized plumber at the time of installation or in
retrofitting to existing systems.
Care should be taken to avoid coming into contact with any pipe work or fixtures associated with the
water heater pipe lines.
Under NO circumstances should any ‘home handy man’ type modifications be
attempted.
• This appliance is not intended for use by persons (including children) with reduced physical sensory
or mental capabilities, or lack of experience and knowledge, that prevents them from using the
appliance safely without supervision or instruction.
Children should be supervised by a responsible
person for their safety to ensure that they do not play with the appliance.
• DANGER: Failure to operate the relief valve easing gear at least once every six months may result
in the water heater exploding. Continuous leakage of water from the valve may indicate a problem
with the water heater.
•
THE INSTALLATION MUST COMPLY WITH THE REQUIREMENTS OF AS/NZS 3500.4, AS/NZS 3000, and
all local codes and regulatory authority requirements. In New Zealand, the installation must conform
to the New Zealand Building Code G12.
The power supply must be protected by an individual circuit breaker at the main electrical supply
switchboard and rated to suit the booster size. The supply to the heat pump water heater can be
operated directly from the switchboard or via a remotely mounted switch or time clock as requested by
the customer. The heater must be provided with a suitable means for disconnecting the power supply.
WARNING
This unit is required reliable earthing
before usage, may otherwise result
in death or injury.
If you can't make sure that your house power supply is earthed
well, please don't install the unit.
The unit must be installed by a licensed tradesperson and in
accordance with：
•
Midea installation instructions.
•
AS/NZS 3500.4-"National Plumbing and Drainage Code Hot
Water Supply Systems-Acceptable Solutions".
•
AS/NZS 3000-Wiring Rules.
•
Local authority regulations.
•
Buliding Codes of Australia
•
Local Occupational Health and Satety (OH&S) Regulations.
This water heater must be installed by a licensed person as required by the Building Act. Only a
licensed person will give you a compliance certificate, showing that the work complies with all the
relevant standards and only a licensed person will have insurance protecting their workmanship for
6 years. Installation shall conform to the Plumbing Code of Australia(PCA).
NOTICE TO CUSTOMERS
Please read and understand this booklet.If you have any questions,please contact our service
representative on 1300 367 565.
FOR CONTINUED SAFETY OF THIS APPLIANCE IT MUST BE INSTALLED, OPERATED AND
MAINTAINED IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS.
THIS APPLIANCE MAY DELIVER WATER AT HIGH TEMPERATURE. REFER TO THE PLUMBING CODE
OF AUSTRALIA (PCA), LOCAL REQUIREMENTS AND INSTALLATION INSTRUCTIONS TO DETERMINE
IF ADDITIONAL DELIVERY TEMPERATURE CONTROL IS REQUIRED.
WARNING

Produkt Specifikationer

Mærke: Midea
Kategori: Varmepumpe
Model: RSJ-23

Har du brug for hjælp?

Hvis du har brug for hjælp til Midea RSJ-23 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Varmepumpe Midea Manualer

Midea

Midea MDS70-CH05B08-AU Manual

10 Juli 2025
Midea

Midea RSJ-300RDN3 Manual

17 Juni 2025
Midea

Midea RSJ-23 Manual

17 Juni 2025
Midea

Midea MDC80-CH03B06E Manual

26 Februar 2025
Midea

Midea MDC70-CH03B06 Manual

26 Februar 2025
Midea

Midea MV8M-180WV2RN8 Manual

8 November 2024
Midea

Midea MV8M-175WV2N8 Manual

8 November 2024
Midea

Midea MV8M-120WV2RN8 Manual

8 November 2024
Midea

Midea MV8M-155WV2N8 Manual

8 November 2024
Midea

Midea MV8M-160WV2RN8 Manual

8 November 2024

Varmepumpe Manualer

Nyeste Varmepumpe Manualer

Daikin

Daikin VAM2000FCVE Manual

13 August 2025
Daikin

Daikin EBBX16DF9W Manual

13 August 2025
Calorex

Calorex V-PAC 22ALX Manual

13 August 2025
Calorex

Calorex I-PAC 16ALX Manual

13 August 2025
Calorex

Calorex V-PAC 16ALX Manual

13 August 2025
Calorex

Calorex V-PAC 12ALX Manual

13 August 2025
Calorex

Calorex I-PAC+ 12ALY Manual

12 August 2025
Daikin

Daikin ELVZ12S23EJ9W Manual

12 August 2025
Daikin

Daikin EWWS600VZSSA1 Manual

12 August 2025
Daikin

Daikin VAM350FCVE Manual

12 August 2025