ɔDamage resulting from incorrect
installation and connection.
Installing and connecting the washing
machine incorrectly will cause serious
damage.
Please read the separate operating
instructions supplied with the appliance.
ɔDamage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Please read the separate operating
instructions supplied with the appliance.
Switching on the washing machine
ĺPress the button.
The welcome screen will light up.
The display will guide you through the initial
commissioning process, which is divided
into 6steps.
For further information, please refer to the
separate operating instructions.
Touch display and sensor controls
The and Start/Stop sensors and the
sensors in the display react to fingertip
contact.
The Touch display can be scratched by
pointed or sharp objects, e.g. pens.
Only touch the display with your fingertips.
1 sensor
Takes you back a level in a menu.
2 Touch display
3 Start/Stop sensor
Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes
slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.
4 Optical interface
For service technicians.
5 button
For switching the washing machine on and off. To save energy, the washing machine will switch off automatically. This occurs 15minutes
after the end of the programme/Anti-crease phase, or after being switched on if no further selection is made.
Main menu
After switching on the washing machine,
the main menu will appear in the display.
You access all the important sub-menus
from the main menu.
Touch the sensor at any time to return to
the main menu. Values set previously are
not saved.
Programmes
For selecting the wash programme.
Favourite programmes
You can save up to 12 of your own
customised wash programmes.
MobileControl
With MobileControl you can operate your
washing machine remotely with the
Miele@mobile App.
Washing assistant
The Washing assistant guides you step by
step so that you can select the optimum
wash programme for your laundry.
Maintenance
Maintenance options for the TwinDos
system and the programme Clean machine
are located in the Maintenance menu (see
"Cleaning and care").
Settings
You can alter the washing machine's
electronics to suit changing requirements in
the Settings menu.
Operating the touch display
Scrolling
You can scroll to the right or the left by
swiping your finger across the screen.
The orange bar under the pictures shows
that there are further options to choose
from.
Selecting
Touch an option in the menu to select it.
If there are multiple options, the selected
option will be highlighted in orange.
Pull-down menu
Touch the top edge of the screen in the
middle and drag down with your finger.
1. Preparing the laundry
ĺEmpty all pockets.
ɔForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺSort the laundry by colour and by care label. Most
garments have a textile care label in the collar or side
seam.
ĺPre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").
2. Selecting a programme
ĺTouch the sensor.Programme
ĺScroll to the right of the display until the programme you
want appears.
ĺTouch the sensor for that programme.
The display will change to show the menu.Overview
There are 3 different ways of selecting a programme.
1. Favourites
2. Washing assistant
3. MobileControl
rpm
1 Detergent dispenser drawer
2 Control panel
3 Access to drain filter, drain pump
and emergency release
4 Door
5 Access panel for TwinDos
containers
3. Selecting programme settings
Selecting the temperature
ĺTouch the Temperature sensor and select the
temperature you want.
Selecting a spin speed
ĺTouch the sensor and select the spin speed Spin speed
you want.
Activating TwinDos
TwinDos dispensing is automatically activated for all
programmes in which dispensing is possible.
1. Switch TwinDos on or off
ĺTouch the TwinDos sensor and select Off or .On
2. Select the detergent
When using Miele's 2-phase system you must set the
colour of the laundry.
If you are using a different type of detergent, this must be
selected.
3. Select the degree of soiling.
ĺSelect Light, Normal or Heavy and confirm your selection
with the sensor.OK
Selecting Extras
ĺTouch the sensor.Extras
ĺSelect one or more Extras and confirm your selection
with the sensor.OK
Activating CapDosing
ĺTouch the CapDosing sensor.
ĺSelect the type of capsule you want.
Stains
ĺTouch the sensor.Stains
ĺSelect the type of stains in your load from the list and
confirm your selection with the sensor.OK
Timer
You can use the Timer to set the finish time or the start
time for a wash programme.
4. Loading the washing machine
Opening the door
ĺTake hold of the
door and pull it
open.
ĺUnfold the
laundry and load
loosely in the
drum.
The maximum load for the programme
selected will appear in the pull-down menu.
Closing the door
ĺMake sure that
no items are
caught between
the door and the
seal.
ĺShut the door
with a gentle
swing.
5. Adding detergent
There are several options for adding
detergent.
TwinDos
TwinDos has to be activated as described
in "Before using for the first time".
Activating TwinDos dispensing
TwinDos dispensing is automatically
activated for all programmes in which
dispensing is possible.
Changing TwinDos dispensing
You can change the suggested colour
composition of the laundry.
ĺTouch the TwinDossensor and select the
colour composition of your laundry.
Deactivating TwinDos dispensing
ĺTouch the TwinDos sensor and then touch
the sensor.Off
Adding detergent
Any detergent suitable for automatic front
loading washing machines can be used
with this appliance. Add detergent in
accordance with the value in the pull-down
dosage display.
Ensure that TwinDos dispensing is
deactivated.
ĺPull out the
detergent drawer
and add
detergent to the
compartments.
Detergent for the pre-wash
Detergent for the main wash,
including Soak if selected
/ Fabric softener, liquid starch or
capsules
Using detergent tablets or pods
Always put detergent tablets or pods
directly in the drum with the laundry.
They cannot be added via the detergent
dispenser drawer.
Using liquid detergent with a pre-wash
Liquid detergent cannot be used for the
main wash if the pre-wash has been
selected.
Use TwinDos dispensing if you are
activating the pre-wash.
CapDosing
If you selected when setting the CapDosing
programme, detergent will be dispensed via
the capsule for this wash programme.
Only one capsule can be selected per wash
programme.
Three different types of capsule are
available:
Fabric care (e.g. fabric softener)
Additives (e.g. detergent enhancers)
Detergent
Each capsule contains the correct amount
for one wash cycle.
Capsules are available to order from Miele
or from the Miele online shop.
ɔCapsules pose a health risk.
The ingredients of capsules can be
hazardous to health if they are swallowed
or come into contact with skin.
Keep capsules out of the reach of
children.
6. Starting the programme –
end of the programme
Starting the programme
ĺTouch the flashing sensor.Start/Stop
The door will lock ( appears in the display)
and the programme will start.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will appear
alternately in the display:
Finish/Anti-crease and
Unlock with "Start/Stop"
ĺTouch the sensor. The door Start/Stop
will be unlocked.
The door unlocks automatically at the end
of the Anti-crease phase.
ĺPull open the door.
ĺRemove the laundry.
Check that all items have been removed
from the drum.
ĺCheck the folds
in the door seal
for any small
articles, e.g.
buttons, which
might be lodged
there.
ĺSwitch the washing machine off with the
button.
ĺIf applicable, remove the used capsule
from the detergent dispenser drawer.
Close the door. Otherwise there is
a danger of objects being placed
inadvertently in the drum. If these remain
unnoticed and were washed in the next
load, they could damage the laundry. An
open door is also a danger to pets and
children.
Extras
You can use the Extras sensor to
augment the wash programmes.
Quick
The programme duration is reduced.
Mechanical action and energy usage
are increased.
Eco
The Eco Extra helps to save energy.
The wash temperature is reduced and
the wash duration is increased in return.
The wash programme continues to
provide excellent results.
Water plus
The water level in the wash and rinse
stages is increased. You can select by
how much the water level is increased
(see "Settings - Water plus level").
Extra rinse
An additional rinse cycle can be carried
out to give a better rinse result.
SingleWash
For efficiently washing a very small load
(<1kg) in a normal wash programme.
The wash duration is reduced.
Please note the following advice:
–Use liquid detergent
–Reduce the dosage to a maximum of
50% of the amount quoted for a ½
load
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Follow the instructions in the
display. Small loads give a better result.
The garments must be suitable for
drying in a tumble dryer and
suitable for ironing .
Pre-wash
For laundry with large amounts of dirt, e.g.
dust and sand.
Soak
For heavily soiled and stained items with
protein stains.
A duration of between 30minutes
and 6hours can be chosen for the
soak process. See "Settings" for more
information.
The factory default setting is 30minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency
is increased through more intense
mechanical action and the application of
more heat energy.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items must
be suitable for drying in a tumble dryer
. and suitable for ironing
Extra gentle
Drum rotation and wash duration are
reduced. Lightly soiled fabrics are washed
more gently.
Extra quiet
This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance, when children are sleeping). The
final spin is automatically reduced to
(Rinse hold). The programme duration is
increased.
Rinse hold
The laundry is not spun after the final rinse
and remains in the rinse water. This helps
prevent creasing if the laundry is not going
to be removed from the drum immediately
after the end of the programme.
