Miele W1 WMB120 Manual
Miele
Vaskemaskine
W1 WMB120
Læs nedenfor 📖 manual på dansk for Miele W1 WMB120 (84 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 90 personer og blev bedømt med 4.9 stjerner i gennemsnit af 45.5 brugere
Side 1/84
Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 518 380
Caring for the environment
2
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposing of your old
appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances, or contact your dealer or
Miele for advice. You are also
responsible (by law, depending on
country) for deleting any personal data
that may be stored on the appliance
being disposed of. Please ensure that
your old appliance poses no risk to
children while being stored prior to
disposal.
Contents
3
Caring for the environment .................................................................................. 2
Warning and Safety instructions ......................................................................... 6
Operating the washing machine ........................................................................ 13
Control panel......................................................................................................... 13
Examples on how to operate the machine............................................................ 15
Before using for the first time ............................................................................ 16
Setting the language ............................................................................................. 16
Removing the transit bars ..................................................................................... 16
Starting the calibration programme....................................................................... 17
Washing environmentally and economically .................................................... 18
1. Prepare the laundry......................................................................................... 19
2. Select a programme........................................................................................ 20
3. Load the washing machine............................................................................. 21
4. Select programme settings ............................................................................ 22
5. Add detergent .................................................................................................. 24
Detergent dispenser drawer.................................................................................. 24
CapDosing............................................................................................................. 25
6. Start the programme - the end of a programme .......................................... 27
Spinning................................................................................................................ 28
Delay start ............................................................................................................ 30
To select delay start .............................................................................................. 30
To change delay start ............................................................................................ 30
To cancel delay start and begin the programme straight away ............................ 30
Programme chart ................................................................................................ 31
Options ................................................................................................................. 34
Short...................................................................................................................... 34
Water plus ............................................................................................................. 34
The following options can be selected in addition to the programme: ................. 35
Programme sequence......................................................................................... 36
Garment care label symbols............................................................................... 38
Contents
4
Changing the programme sequence ................................................................ 39
Cancelling a programme ....................................................................................... 39
Interrupting a programme...................................................................................... 39
Changing a programme......................................................................................... 39
Adding or removing laundry after the programme has started ............................. 40
Safety lock............................................................................................................. 41
Detergent ............................................................................................................. 42
The correct detergent............................................................................................ 42
Water softeners ..................................................................................................... 42
Dispensing aids ..................................................................................................... 42
Fabric conditioner and liquid starch...................................................................... 42
Miele recommended detergents ........................................................................... 43
Recommended detergents in accordance with Directive (EU) Nr. 1015/2010...... 44
Cleaning and care ............................................................................................... 46
Cleaning the drum (Hygiene info) .......................................................................... 46
External casing and fascia panel........................................................................... 46
Cleaning the detergent dispenser drawer ............................................................. 46
Cleaning the water inlet filters ............................................................................... 48
Problem solving guide ........................................................................................ 49
The programme does not start.............................................................................. 49
The following fault messages appear in the display and the programme stops... 50
A message appears in the display at the end of the programme ......................... 51
General problems with the washing machine ....................................................... 52
An unsatisfactory wash result ............................................................................... 54
The door will not open........................................................................................... 55
Opening the door in the event of a blocked drain outlet and/or power failure ..... 56
After sales service............................................................................................... 58
Repairs .................................................................................................................. 58
Guarantee: U.K...................................................................................................... 58
Guarantee: Other countries................................................................................... 58
Optional accessories............................................................................................. 58
Installation and connection ................................................................................ 59
Front view .............................................................................................................. 59
Rear view............................................................................................................... 60
Installation surface ................................................................................................ 61
Transporting the washing machine to its installation site...................................... 61
Removing the transit bars ..................................................................................... 61
Re-fitting the transit bars....................................................................................... 63
Contents
5
Levelling the machine............................................................................................ 64
Screwing out and adjusting the feet.................................................................64
Building under a continuous worktop/ in a kitchen run.................................... 65
Washer-dryer stack .......................................................................................... 65
The water protection system................................................................................. 66
Connection to the water supply ............................................................................ 67
Connection to the drainage system ...................................................................... 68
Electrical connection U.K...................................................................................... 69
Consumption data............................................................................................... 70
Note for test institutes ........................................................................................... 70
Technical data...................................................................................................... 71
Settings ................................................................................................................ 72
Language ........................................................................................................... 73
Degree of soiling.................................................................................................... 73
Buzzer volume....................................................................................................... 73
Keypad tone .......................................................................................................... 73
Code...................................................................................................................... 74
Temperature unit.................................................................................................... 74
Display brightness................................................................................................. 74
Dark display........................................................................................................... 74
Machine switch-off................................................................................................ 75
Display maximum load.......................................................................................... 75
Display programme name ..................................................................................... 75
Memory ................................................................................................................. 76
Pre-wash Cottons.................................................................................................. 76
Gentle action ......................................................................................................... 76
Reduce temp......................................................................................................... 76
Water plus ............................................................................................................. 77
Water plus level ..................................................................................................... 77
Maximum rinse level.............................................................................................. 77
Suds cooling.......................................................................................................... 77
Low water pressure............................................................................................... 78
Anti-crease ............................................................................................................ 78
Optional accessories .......................................................................................... 79
Detergent............................................................................................................... 79
Specialist detergents............................................................................................. 79
Fabric care............................................................................................................. 80
Additives................................................................................................................ 80
Warning and Safety instructions
6
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and
maintenance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
This washing machine is intended for use in domestic households
and similar working and residential environments.
The washing machine is not intended for outdoor use.
It must be used only as a domestic appliance to wash items which
are specified by the manufacturer as being washable on the wash
care label. Miele cannot be held liable for damage resulting from
incorrect or improper use or operation.
The washing machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the
consequences of incorrect operation.
Warning and Safety instructions
7
Safety with children
Children under 8 years of age must be kept away from the
washing machine unless they are constantly supervised.
Children 8 years and older may only use the washing machine
unsupervised if they have been shown how to use it safely and
recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the washing
machine unsupervised.
Please supervise children in the vicinity of the washing machine
and do not let them play with it.
Technical safety
Please observe the instructions in "Installation and connection"
and "Technical data".
Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
Before connecting the washing machine, ensure that the
connection data on the data plate (fuse rating, voltage and
frequency) match the mains electricity supply. If in any doubt,
consult a qualified electrician.
Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
Warning and Safety instructions
8
The electrical safety of this washing machine can only be
guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washing machine to the mains electricity
supply by a multi-socket adapter, extension lead or similar. These do
not guarantee the required safety of the machine (fire hazard due to
the risk of overheating).
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee the safety standards of the machine.
The electrical socket must be easily accessible after installation so
that the machine can be disconnected from the electricity supply if
necessary.
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the
guarantee.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
Warning and Safety instructions
9
The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
The water flow pressure must be at least 100kPa and should not
exceed 1000kPa.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
The machine must not be used in a non-stationary location (e.g.
on a ship).
Do not make any alterations to the machine, unless authorised to
do so by Miele.
Warning and Safety instructions
10
Correct use
Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the
electronic control unit may be impaired at temperatures below
freezing point.
Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
Turn off the stopcock if the machine is to be left for any length of
time (e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins,
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds
container, drum), which in turn can result in damage to the laundry.
Warning and Safety instructions
11
Take care when opening the drum door after using the steam
function. Danger of burning due to escaping steam and the high
temperature of the surface of the drum as well as the porthole glass.
Stand back away from the machine and wait until the steam has
dissipated.
The maximum load for this washing machine is 8 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaling agent which is available to
order online at www.miele-shop.com or from Miele. Strictly observe
the instructions on the packaging.
Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being
washed in the machine.
Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and
explosion hazard.
Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the surfaces of the machine. They can cause
damage to plastic surfaces.
Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the
manufacturer's instructions carefully.
Operating the washing machine
13
Control panel
aDisplay with sensors
See the next page for more
information.
bStart/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
cTemperature button
For selecting the temperature.
dSpin speed button
For selecting the spin speed.
eDelay start button
For selecting delay start.
fOption buttons
Various options can be added to the
wash programme.
gProgramme selector
For selecting the wash programme.
hOptical interface PC
For service technicians.
i button
For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15
minutes after the end of the
programme/anti-crease phase or
after being switched on if no other
selection is made.
Operating the washing machine
14
j sensor
Scrolls down the list to the next
option or decreases a value.
kOK sensor
Confirms the programme selected, a
value set or opens a sub-menu.
l sensor
Scrolls up the list to the next option
or increases a value.
m Cap sensor
Activates cap dosing via the
detergent dispenser drawer.
Sensors to light up when the
display can be operated via the
sensors.
Standard display
The standard display shows the
following from left to right:
2:59 1600
– the programme duration
– the selected wash temperature
– the selected spin speed
Programme duration
After the programme has started the
programme duration will appear in the
display in hours and minutes.
If delay start has been selected, the
programme duration will appear at the
end of the delay start time.
Delay start
The delay start time selected will
appear in the display.
After the programme has started the
delay start time will begin to count
down.
Once the delay start time has elapsed,
the estimated programme duration will
appear in the display.
Operating the washing machine
15
Examples on how to operate
the machine
Scrolling through a list
The arrows in the display indicate that
a list is available.
Language
Touching the sensor scrolls down the
list to the next option and touching the
sensor scrolls up the list to the next
option. The sensor is used toOK
activate the option which is currently in
the display.
Identifying options selected
Cap
If an option has been activated, this will
be indicated by a tick next to it.
Setting numerical values
Start in h00 :00
A numerical value is highlighted in
white. Touching the sensor
decreases the value and touching the
sensor increases it. The sensor isOK
used to activate the value which is
currently in the display.
Exiting a sub-menu
Select to exit a sub-menu.Back
Before using for the first time
16
Before using the machine for the
first time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filters are
securely tightened to prevent the risk
of water leaks during use.
Remove the protective foil and
stickers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.
Switch on the washing
machine
Press the button.
The welcome screen will light up.
Setting the language
You will be asked to select the language
you want for the display. It is possible
to change the language at any time via
"Settings".
deutsch
Touch the or sensor until the
language you want appears in the
display.
Confirm your selection of the
language by touching the sensor.OK
Removing the transit bars
A reminder to remove the transit bars
will appear in the display.
Failure to remove the transit bars
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation and connection".
Confirm the removal of the transit
bars with the sensor.OK
Before using for the first time
17
Starting the calibration
programme
The following message appears in the
display:
Open and run Cottons 90°C without
laundry
Touch the sensor repeatedly until
you have read all the rows of text.
The sensor will light up.OK
Confirm the message with the
OKsensor.
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this the beCottons 90°C must
started without laundry and without
detergent.
No other programmes can be started
until calibration has been carried out.
Open the stopcock.
Turn the programme selector to
Cottons.
1:55 90°C 1600
Press the Start/Stop button.
The calibration programme has started.
This will take approx. 2hours.
At the end of the programme the
following message will be displayed:
Set up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the button.
Washing environmentally and economically
18
Energy and water consumption
– Water consumption and energy
usage are determined by the size of
the load.
To make the most of your machine,
load the maximum dry load for the
programme you are using.
– When smaller amounts of laundry are
washed, the automatic load
recognition system will reduce the
amount of water and energy used.
– Use the programme forExpress20
small, lightly soiled loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20°C). Washing using lower
temperature settings will save energy.
– To maintain the hygiene of the
machine, carry out a hot wash (60°C
or above) using powder detergent at
regular intervals. willHygiene info
appear in the display to remind you
to carry out a hot wash.
Detergent
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
smaller loads (approx. ⅓ less than
the amount recommended can be
used when washing a half load).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
1. Prepare the laundry
19
Empty all pockets.
Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and to components in
the machine.
Check the laundry before washing
and remove any foreign objects.
Sort the laundry
Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Tip: Dark textiles often contain excess
dye and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
Pre-treat stains
Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
Tip: Badly soiled areas can be pre-
treated with liquid detergent, stain
removers etc. first, following the
manufacturer's instructions. With
particularly stubborn stains ask your dry
cleaner for advice.
Solvent-based cleaners (e.g.
benzine) can damage plastic parts.
When pre-treating garments, make
sure that any plastic parts (e.g.
buttons) are protected from cleaning
agent.
Chemical (solvent-based)
cleaning agents can cause severe
damage to the washing machine.
Do not use solvent-based cleaning
agents in this machine.
General tips
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Close any zips, attach velcro
fasteners, fasten hooks and eyes etc.
before washing.
– Fasten duvet covers, pillow cases
etc. to prevent small items from being
rolled up inside them.
Do not wash any items in this washing
machine which are specified by the
manufacturer as on thenot washable
care label ( symbol).
3. Load the washing machine
21
Open the door
Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with
laundry.
Unfold the laundry and load loosely
into the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Please note the maximum load for the
different wash programmes. The
relevant programme load is always
shown in the display when you select a
programme.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
Close the door
Make sure that no items are caught
between the door and the seal.
Shut the door with a gentle swing.
4. Select programme settings
22
Degree of soiling
Lightly soiled
No visible dirt or stains. Possibly slight
body odour.
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Soiling and/or stains clearly visible.
Tip: You can switch on the degree of
soiling query and select the default
setting for the degree of soiling (see
"Settings - Degree of soiling").
If the degree of soiling query has been
switched on, the following will appear in
the display:
Degree of soiling
The display will change automatically to
the degree of soiling query:
Normal
Set the degree of soiling with the
and sensors and confirm your
selection with the sensor.OK
The following parameters will change
depending on the degree of soiling
selected:
– with the degree of soilingHeavy
setting, a pre-wash will be carried out
automatically for some programmes
(see "Options").
– the rinse water level will be adjusted
– the programme durations (with light
soiling the programme duration will
be shorter)
In the Express 20 programme the
degree of soiling cannot be selected.
Express 20 is designed for lightly
soiled laundry.
Select a temperature
You can alter the pre-set temperature
of a wash programme.
Press the Temperature button.
The following will appear in the display:
Temperature
Set the temperature you want with
the and sensors and confirm
your selection with the sensor.OK
4. Select programme settings
23
Selecting a spin speed
You can alter the pre-set spin speed of
a wash programme.
Press the button.Spin speed
The following will appear in the display:
Spin speed rpm1600
Set the spin speed you want with the
and sensors and confirm your
selection with the sensor.OK
Select options
Press the button for the option you
want.
The indicator light in the button will
come on.
Not all options are suitable for use
with every programme. You can only
select options which are compatible
with the programme being used.
See "Options".
Switch on delay start (if
required)
The start of a programme can be
delayed from 15 minutes up to 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
See "Delay start".
5. Add detergent
24
There are several options for adding
detergent.
Detergent dispenser drawer
Too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater
elements.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
Pull out the detergent dispenser
drawer and add detergent to the
compartments as follows:
Detergent for the pre-wash (divide the
total recommended amount as follows:
add ⅓ to compartment and ⅔ to
compartment )
Detergent for the main wash
/
Fabric conditioner, liquid starch or
capsules.
See "Detergent" for further information.
5. Add detergent
25
CapDosing
Three different types of capsule are
available:
= Fabric care (e.g. fabric
conditioner, proofing agent)
= Additives (e.g. detergent
enhancers)
= Detergent (for the main wash
only)
Each capsule contains the correct
amount for one wash cycle.
You can order the capsules online at
www.miele-shop.com or from Miele
(see the end of this booklet for contact
details).
Keep capsules out of the reach
of children.
Activating CapDosing
Touch the sensor.Cap
The first type of capsule which can be
selected for the programme will appear
in the display.
Cap
Select the type of capsule you want
with the and sensors and
confirm your selection with the OK
sensor.
Inserting a capsule
Open the detergent dispenser drawer.
Open the lid of the /
compartment.
Press the capsule in firmly.
5. Add detergent
26
Close the lid and press it firmly shut.
Close the detergent dispenser
drawer.
The capsule is opened by the act of
inserting it in the detergent dispenser
drawer. The contents can run out of
the capsule if you then remove it
from the drawer before it is used.
In this case, dispose of the capsule
and do not re-use it.
The wash programme will dispense the
contents of the capsule at the correct
time.
Water intake to the compartment
is solely via the capsule.
No additional fabric conditioner may
be added to the compartment
when using a capsule.
Remove the empty capsule at the
end of the programme.
For technical reasons a small amount
of water will remain in the capsule.
Deactivating/changing
CapDosing
Touch the Cap sensor and follow
the instructions in the display.
Spinning
28
Final spin speed
Programme rpm
Cottons 1600
Minimum iron 1200
Woollens 1200*
Separate rinse / Starch 1600*
Delicates 900
Express 20 1200
Dark garments / Denim 1200
Shirts 900
Drain / Spin 1600
Final spin speed in the
programme
When a programme is selected the
optimum spin speed for that
programme will appear in the display.
For programmes marked with a in the*
chart, the optimum spin speed is not
the maximum spin speed.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.
Spinning
29
To omit the final spin (Rinse
hold)
Use the button to selectSpin speed
the setting (Rinse hold). The
laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if
the laundry is not going to be
removed from the drum immediately
after the end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the button.Start/Stop
– To end the programme:
Use the button to selectSpin speed
the setting (Without spin) and0 rpm
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
Press the button.Spin speed
Select the setting.0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Delay start
30
With delay start you can choose when
you want the programme to start. You
can delay the start of the programme
from 15 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To select delay start
Press the button.Delay start
The following will appear in the display:
Start in h00 :00
Use the and sensors to enter the
hour and confirm your entry with the
OK sensor.
The display will change:
Start in h05: 00
Use the and sensors to enter the
minutes and confirm your entry with
the sensor.OK
Tip: The values will count upwards and
downwards automatically if you touch
the or sensor continuously.
To begin delay start
Press the button to beginStart/Stop
delay start and the wash programme.
The following will appear in the display:
Start in h05: 00
When the delay start time has elapsed,
the programme will begin and the
display will show the programme
duration and the programme sequence.
To change delay start
You can change delay start at any time.
Press the button.Delay start
Change the time
Touch the sensor.OK
Start in h05 :29
Now enter the time you want.
To cancel delay start and begin
the programme straight away
Press the button.Delay start
Change the time
Touch the sensor.
Start now
Touch the sensor. The washOK
programme will start immediately.
Programme chart
31
Cottons cold to 90°C Max. load 8.0 kg
Use for Cotton, linen or cotton mix fabric, e.g. table linen, towelling,
underwear, T-shirts etc.
Note The settings 60°/40°C differ from / as follows:
– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required please select a
temperature of 60°C or higher.
Cottons Max. load 8.0 kg /
Use for Normally soiled cotton garments.
Notes – These settings are the most efficient in terms of energy and water
consumption for washing cottons.
– With the actual wash temperature reached will be lower than
60°C although the wash performance is the same as with the
standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label to Directive
1061/2010.
Minimum iron cold to 60°C Max. load 4.0 kg
Use for Synthetic, mixed fibre and easy care cotton.
Note Reduce the spin speed for fabric which creases easily.
Programme chart
32
Woollens cold to 40°C Max. load 2.0 kg
Use for Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Note Reduce the spin speed for items which crease easily.
Separate rinse / Starch Max. load 8.0 kg
Use for – Rinsing handwashed items.
– Starching table cloths, serviettes and workwear.
Notes – Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric
conditioner.
– Items will be rinsed very effectively using two rinse cycles by
activating the option.Water plus
Delicates cold to 60°C Max. load 3.0 kg
Use for Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes – Dust in curtains usually makes a programme with pre-wash
advisable. Select the setting for the degree of soiling so thatHeavy
a pre-wash will be carried out.
– Deselect the spin for items which crease easily.
Programme chart
33
Express 20 cold to 40°C Max. load 3.5 kg
Use for Cotton garments that have hardly been worn or are only very lightly
soiled.
Note The option is activated automatically.Short
Dark garments / Denim cold to 60°C Max. load 3.0 kg
Use for Black and dark items made of cotton, mixed fibre or denim.
Notes – Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Shirts cold to 60°C Max. load 2.0 kg
Use for Shirts and blouses made of cotton and mixed fibre.
Notes – Pre-treat soiled cuffs and collars if necessary.
– Wash silk shirts and blouses in the programme.Silks
Drain / Spin Max. load 8.0 kg
Notes – Drain only: Select for the spin speed.0 rpm
– Make sure you select the appropriate spin speed.
Options
34
Options are selected and deselected via
the relevant buttons and the display.
Press the button for the option you
want.
The relevant button will light up.
Not all options are suitable for use with
every programme.
You can only select options which are
compatible with the programme being
used.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Please note the load information
in the display. Small loads give a better
result.
The garments must be suitable for
drying in a tumble dryer and
suitable for ironing .
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Water plus
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the "Separate rinse /
Starch" programme.
You can select other functions for the
Water plus button. These are described
in "Settings".
Options
35
The following options can be selected in addition to the
programme:
None of the options can be selected with programmes which are listed in thenot
chart below.
Pre-wash1) Pre-ironing Short Water plus
Cottons X X X X
Minimum iron X X X X
Separate rinse /
Starch
– – – X
Delicates X X X X
Express 20 – X X2) –
Dark garments /
Denim
X X X X
Shirts XX2) X X
X= Can be selected
– = Cannot be selected
1) = Activated automatically when the degree of soiling setting isHeavy
selected
2) = Can be deselected
Changing the programme sequence
39
Cancelling a programme
You can cancel a programme at any
time after it has started:
Press the Start/Stop button.
The following will appear in the display:
Cancel programme
Touch the sensor.OK
The suds will be pumped away. The
following will appear in the display:
Prog. cancelled
Pull open the door.
Remove the laundry.
If you want to select a different
programme
Close the door.
Select the programme you want.
Add detergent to the detergent
dispenser drawer, if necessary.
Press the Start/Stop button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the button.
Switch the washing machine back on
with the button to continue with
the same programme.
Changing a programme
After the start of a programme it is no
longer possible to select a different
programme.
Temperature
With the exception of the Cottons
programme, it is possible to select a
different temperature up to 5 minutes
after the programme has started.
Press the Temperature button.
Use the , and sensors to OK
change the temperature.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
Press the button.Spin speed
Use the , and sensors to OK
change the spin speed.
Options
It is possible to select or deselect the
Short Water plus and options up to 5
minutes after the programme has
started.
Tip: It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.
Produkt Specifikationer
| Mærke: | Miele |
| Kategori: | Vaskemaskine |
| Model: | W1 WMB120 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Miele W1 WMB120 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Vaskemaskine Miele Manualer
15 Januar 2025
14 Januar 2025
14 Januar 2025
13 Januar 2025
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
Vaskemaskine Manualer
- Vaskemaskine Bauknecht
- Vaskemaskine Drean
- Vaskemaskine VOX
- Vaskemaskine Koblenz
- Vaskemaskine BLANCO
- Vaskemaskine Vedette
- Vaskemaskine PKM
- Vaskemaskine Toshiba
- Vaskemaskine Cambro
- Vaskemaskine Flavel
- Vaskemaskine Asko
- Vaskemaskine Inventum
- Vaskemaskine Calex
- Vaskemaskine EasyMaxx
- Vaskemaskine Sanyo
Nyeste Vaskemaskine Manualer
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025