Miele WCE330 WCS PWash 2.0 Manual

Miele Vaskemaskine WCE330 WCS PWash 2.0

Læs gratis den danske manual til Miele WCE330 WCS PWash 2.0 (4 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Miele WCE330 WCS PWash 2.0, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WCE 330 en - AU, NZ M.-Nr. 10 874 790/00

Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras

OPERATING THE WASHING MACHINE

PREPARING THE LAUNDRY/SELECTING A PROGRAMME

ADDING DETERGENT/STARTING THE PROGRAMME

1 2

ɉBefore using the machine for the first

time, ensure that it is correctly installed

and connected.

Please read the separate operating

instructions supplied with the appliance.

ɉFailure to remove the transit bars can

result in damage to the washing machine

and to adjacent cabinetry or appliances.

Remove the transit bars as described in

"Installation and connection".

Switching on the washing machine

ĺTurn the programme selector to the

Cottons programme.

The welcome tone will sound and the

welcome screen will light up.

The display will guide you through the initial

commissioning process, which is divided

into 3steps.

For further information, please refer to the

separate operating instructions.

Operating the sensor controls

The sensor controls react to fingertip

contact. Selection is possible as long as the

respective sensor is illuminated.

If a sensor is brightly lit, this means:

currently selected

If a sensor is dimly lit, this means: selection

possible

Washing environmentally and economically

–To get the most out of your machine,

load the maximum dry load for the

programme you are using.

–When smaller amounts of laundry are

washed, the automatic load recognition

system will reduce the amount of water

and energy used.

–Use the programme for Express 20

small, lightly soiled loads.

–Modern detergents enable washing at

reduced temperatures (e.g. 20°C). Use

appropriate temperature settings for

saving energy.

–Reduce the amount of detergent with

smaller loads (approx. ⅓ less than the

amount recommended can be used

when washing a half load).

–Selecting the highest possible spin

speed for the wash programme will

save energy when drying in a tumble

dryer afterwards.

1. Preparing the laundry

ĺEmpty all pockets.

ɉForeign objects (e.g. nails,

coins, paper clips, etc.) can

cause damage to garments and

components in the machine.

ĺSort the laundry by colour and by care label. Most

garments have a textile care label in the collar or side

seam.

ĺPre-treat stains and badly soiled areas (see the booklet

"Miele's guide to laundry care").

1 Detergent dispenser drawer

2 Control panel

3 Access to drain filter, drain pump

and emergency release

4 Door

3. Loading the washing machine

Opening the door

ĺReach under the door grip and

pull the door open.

ĺUnfold the laundry and load

loosely in the drum.

Closing the door

ĺMake sure that no items are

caught between the door and

the seal.

ĺShut the door with a gentle

swing.

CapDosing

Three different types of capsule are

available:

Fabric care (e.g. fabric softener)

Additives (e.g. detergent enhancers)

Detergent

Each capsule contains the correct amount

for one wash cycle.

Capsules are available to order from Miele

or from the Miele online shop (see the end

of this booklet for contact details).

Keep capsules out of the reach of

children.

Activating CapDosing

ĺTouch the sensor.

The following appears in the display:

No cap 

ĺTouch the sensors until the capsule 

you want appears in the display.

ĺConfirm the capsule with the sensor.OK

See "Detergent" in the operating

instructions for more information.

5. Adding detergent

Any detergent suitable for automatic front

loading washing machines can be used

with this appliance. Please observe the

instructions for use and dosage on the

detergent packaging.

There are several options for adding

detergent.

Filling with detergent

ĺPull out the

detergent drawer

and add

detergent to the

compartments.

Detergent for the pre-wash

Detergent for the main wash,

including Soak if selected

 /  Fabric softener, liquid starch or

capsules

Adding fabric softener

ĺAdd fabric

softener or liquid

starch to the 

compartment.

Do not exceed

the maximum

level mark.

It will be automatically dispensed in the

final rinse. At the end of the programme a

small amount of water remains in the fabric

softener compartment.

Using detergent tablets or pods

Always put detergent tablets or pods

directly in the drum with the laundry.

They cannot be added via the detergent

dispenser drawer.

PowerWash display with the Quick and

Eco sensor controls

PowerWash display

Normal programme sequence.

ĺDo not activate the or Quick Eco

sensors.

Quick sensor

Short programme sequence. The

mechanical action and energy will increase

with this option.

ĺTouch the sensor.Quick

Eco sensor

Energy-saving programme sequence.

The wash temperature is reduced and the

programme duration increased.

ĺTouch the sensor.Eco

Delay start 

Delay start

With Delay start you can delay the start of

the programme. The start of the programme

can be delayed from 15minutes up to a

maximum of 24hours.

4. Selecting programme settings

Selecting a temperature/spin speed

ĺTouch the sensors above or below the temperature 

or spin speed value in the display until the temperature/

spin speed you want appears in the display.

Selecting Extras

There are two ways of selecting Extras.

1. Directly above the sensor controls

ĺTouch the sensor for the Extra you want. It then lights up

brightly.

2. Via the Extras sensor control and the display

ĺTouch the sensor control.Extras

The following appears in the display: No Extras 

ĺTouch the sensor controls until the Extra you want 

appears in the display and confirm this with the OK

sensor.

2. Selecting a programme

ĺTurn the programme selector to a programme.

Programme selection

There are two possible ways to select a programme:

1. Selecting standard programmes via the

programme selector

ĺTurn the programme selector to the required

programme.

The selected programme will appear in the display. This

will then be replaced by the standard display.

2. Selecting further programmes via the "Further

programmes/ position and the display"

ĺTurn the programme selector to the Further

programmes/ position.

The following appears in the display: Express 20

ĺTouch the sensors until the programme you want 

appears in the display.

ĺConfirm the programme with the sensor.OK

1 Control panel

The control panel consists of a display

and various sensor controls.

2 Display

The following values are shown and/or

selected in the display:

3 Sensor controls 

The values in the display can be

changed with the . sensors

4 OK sensor

The OK sensor is used to confirm

selected values.

5 PowerWash display with the Quick

and Eco sensors

If the PowerWash indicator lights up

when you select a wash programme,

you can choose between three

programme sequences.

6 Optical interface

for service technicians.

7 Sensor controls for Extras

You can supplement wash programmes

with Extras.

8  sensor

Activates detergent dispensing with a

capsule.

9  sensor

The sensor button starts the Delay 

start function.

10 Start/Stop sensor

Touching the Start/Stop sensor starts

the selected programme or cancels a

programme that has already started.

11 Programme selector

For selecting programmes and switching

the washing machine off.

6. Starting the programme - end

of the programme

Starting the programme

ĺTouch the flashing sensor.Start/Stop

The door will lock ( appears in the display) 

and the programme will start.

At the end of the programme

The door is still locked during the Anti-

crease phase and the following will appear

alternately in the display:

 Finish/Anti-crease and

 Press Start/Stop

ĺTouch the sensor. The door Start/Stop

will be unlocked.

ĺPull open the door.

ĺRemove the laundry.

Check that all items have been removed

from the drum.

ĺCheck the folds

in the door seal

for any small

articles, e.g.

buttons, which

might be lodged

there.

ĺTurn the programme selector to the 

position. This switches the washing

machine off.

ĺIf applicable, remove the used capsule

from the detergent dispenser drawer.

Close the door. Otherwise there is

a danger of objects being placed

inadvertently in the drum. If these remain

unnoticed and were washed in the next

load, they could damage the laundry. An

open door is also a danger to pets and

children.

Extras

You can use the Extras sensor to augment

the wash programmes.

SingleWash

For efficiently washing a very small load

(<1kg) in a normal wash programme. The

wash duration is reduced.

Please note the following advice:

–Use liquid detergent

–Reduce the dosage to a maximum of

50% of the amount quoted for a ½ load

Pre-ironing

In order to reduce creasing, the laundry

undergoes a smoothing process at the

end of the programme. Reducing the

maximum load by 50% will give a better

result. Follow the instructions in the

display. Small loads give a better result.

The garments must be suitable for drying

in a tumble dryer and suitable for  

ironing  .

Water +

The water level in the wash and rinse

stages is increased and a second rinse is

carried out in the "Separate rinse/Starch"

programme.

You can select other functions for the

Water + sensor control. These are

described in "Settings".

Pre-wash

For laundry with large amounts of dirt, e.g.

dust and sand.

Soak

For heavily soiled and stained items with

protein stains.

A duration of between 30minutes

and 6hours can be chosen for the

soak process. See "Settings" for more

information.

The factory default setting is 30minutes.

Intensive

For hard-wearing laundry that is very

heavily soiled. Cleaning efficiency

is increased through more intense

mechanical action and the application of

more heat energy.

Extra quiet

This option reduces noise levels during

the wash programme. Use this if you

want to wash during quiet periods (for

instance, when children are sleeping). The

final spin is automatically reduced to 

(Rinse hold). The programme duration is

increased.

Extra gentle

Drum rotation and wash duration are

reduced. Lightly soiled fabrics are washed

more gently.

AllergoWash

This option should be used where high

standards of hygiene are required. More

energy is used to lengthen temperature

holding times and more water is used to

increase rinsing efficiency. The items must

be suitable for drying in a tumble dryer 

  . and suitable for ironing

Produkt Specifikationer

Mærke:	Miele
Kategori:	Vaskemaskine
Model:	WCE330 WCS PWash 2.0
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	596 mm
Dybde:	636 mm
Højde:	850 mm
Vægt:	92000 g
Produktfarve:	Hvid
Kontroltype:	Buttons, Rotary
Indbygget skærm:	Ja
Strøm:	10 A
Ledningslængde:	2 m
Energieffektivitetsklasse (gammel):	A+++
Placering af apparat:	Fritstående
Dørhængsel:	Højre
Inverter-teknologi:	Ingen
Tilsluttet belastning:	2400 W
Ilægningstype:	Front-læsning
Tromlekapacitet:	8 kg
Maksimal centrifugeringshastighed:	1400 rpm
Støjniveau (centrifugering):	72 dB
Støjniveau (vask):	48 dB
Forsinket start-timer:	Ja
Vaskeprogrammer:	Blouse/shirt, Cotton, Easy care, Hand/wool, Intensive/outdoor, Jeans/denim, Quick, Silent, Sport, Spin/drain, Delicate/silk
Skyl hold:	Ja
Børnesikring:	Ja
Energiforbrug ved vask:	0.84 kWh
Årligt energiforbrug vask:	157 kWh
Dør farve:	Sølv
Balje materiale:	Rustfrit stål
Spin-tørre klasse:	B
Cyklustid (maks.):	179 min.
Skum kontrol system:	Ja
Restfugtighed:	49 %
Årligt vandforbrug vask:	9900 L
Vandforbrug pr. cyklus:	48 L
Forsinket start (maks.):	24 t
Selvrensende:	Ja
Indikator for resterende tid:	Ja
Vandpåfyldning:	Kold
Dispenser skuffetype:	3-vejs
Rense plus funktion:	Ja
Cyklustid (hurtigt vaskeprogram):	20 min.
Lydalarm:	Ja
Døråbning diameter:	1054 mm