ENG
1
Power your MiiBUDS PLAY II Earbuds ON/OFF
ON: Take out the earbuds from the charging case and they will automatically
power on OR manually press the PLAY touch-button for 2 seconds.
When ON: You will hear: "Power ON".
OFF: Place the earbuds back into the charging case and close it, and they will turn
off automatically.
When OFF: The LED flashes 5 times.
Pairing Your MiiBUDS PLAY II Earbuds
1: Take out both earbuds from the charging case, and they will connect to each
other automatically.
2: Activate BT on your phone (or other device) and search for new BT device and
select: . MiiBUDS PLAY II
3: You will hear "paired" in both earbuds.
Charging Your Earbuds and the Charging Case
Earbuds: Place the earbuds into the charging case.
Charging Case:
Use a 5V/1A USB adapter for charging.
Connect the charging cable on the back of the charging case (B).
When the charging case is charging, an LED indicator (A) will be ON. It will turn off,
when the charging case is fully charged.
Wireless Charging of Charging Case: Make sure to place the Charging Case
correctly on the wireless charging plate/charger. Full charging time of the charging
case is about 2.5-3 hours.
Play/Pause
Single tap the PLAY touch-button once on either earbud.
Volume Up/ Volume Down
Turn UP volume: Triple tap the PLAY touch-button on the RIGHT earbud.
Turn DOWN volume: Triple tap the PLAY touch-button on the LEFT earbud.
Previous Song I Next Song
SKIP to NEXT song: Double tap the PLAY touch-button on the RIGHT earbud.
SKIP to PREVIOUS song: Double tap the PLAY touch-button on the LEFT earbud.
Activate Siri on iOS-device:
Access Siri by pressing the PLAY touch-button on the LEFT earbud for 2 seconds.
Soft Reset:
1: Delete "
MiiBUDS PLAY II
” from the BT list on your phone/device. Restart the phone.
2: Open the charging case, long press the RESET button (F) for 10 seconds, the white
LED will flash 5 times and then the red LED will flash 5 times. After that release the
button. The earbuds will connect to each other automatically and then enter pairing
mode.
3: Select "
MiiBUDS PLAY II
" in the BT list on your phone/device.
How to activate the ANC – Active Noise Cancelling function
ANC ON:
Press the PLAY touch-button on the RIGHT earbud for 2 seconds. You will
hear “noise cancelling on”.
For the best and most optimal comfort, sound and bass
experience, it is important that you find the ear tips that
fits perfectly in your ears.
