Mill SG2000LED Manual

Mill Varmeapparat SG2000LED

Læs gratis den danske manual til Mill SG2000LED (10 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Mill SG2000LED, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
ASSEMBLY AND INSTRUCTION MANUAL (EN)
Please read the instrucons carefully before use. Take good care of this manual for later use.
This assembly and instrucon manual applies to the following products:
SG2000MEC, SG2000LED, SG2000GLASS
Series: Convecon
Important safety informaon
You must obey common safety guidelines when using electrical products, especially in the presence of children.
WARNING! To avoid electric shock or damage due to the heat, always make sure the plug is pulled out before the heater is moved
or cleaned.
Read the instrucons carefully.
The product is intended for home use only.
Make sure the heater is connected to the house's regular mains (230 V), as it indicated on the heater.
New heaters will produce a specic odor when used the rst me. This will stop aer a short me and is completely
harmless.
Check for any pieces of packing foam or cardboard that may have fallen into the heang elements of the heater. These
pieces must be removed in order to avoid unpleasant odors.
Prevent the heater from overheang – . do not cover
Always turn o the heater and unplug it when not used for a long me.
Pay special aenon if the heater is used in rooms where children, the handicapped or elderly reside.
The heater should not be set up directly beneath an electrical socket outlet.
The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.
The heater must not be used if either the cord or plug is damaged. The heater must not be used if it has been dropped on
the oor or is damaged in any other way causing it to malfuncon.
The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situaons.
Avoid using extension cords, which may overheat and could possibly start a re.
Never cover the air vents on the heater. Avoid potenal re hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal at oors.
The heater should not be installed in close proximity to ammable materials of any kind because there can always be a risk
of re.
The heater must never be used in rooms where gasoline, paint or other ammable liquids are stored, such as in a garage.
Never touch an electric heater with wet hands. The heater should be installed so a person showering or taking a bath
cannot come into direct contact with it.
The heater becomes hot when it is on. Therefore, be careful and avoid burning or scorching your skin.
The heater must be switched o, the plug removed and the heater must cool down before it is moved.
Avoid overloading the mains (the circuit) where the heater is connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
EN 2 millheat.com

Produkt Specifikationer

Mærke: Mill
Kategori: Varmeapparat
Model: SG2000LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Mill SG2000LED stil et spørgsmål nedenfor, og andre brugere vil svare dig


Varmeapparat Mill Manualer

Mill

Mill SG2000LED Manual

22 September 2024
Mill

Mill SG2000GLASS Manual

13 September 2024
Mill

Mill PH600DN Manual

2 September 2024
Mill

Mill PH800L DN Manual

5 August 2024
Mill

Mill GL600WIFI3 Manual

4 August 2024
Mill

Mill HT12 Manual

2 August 2024
Mill

Mill CO2200MECMAX Manual

1 August 2024
Mill

Mill MB800L DN Manual

28 Juli 2024
Mill

Mill HT5512 Manual

24 Juli 2024
Mill

Mill Gentle Air OIL1500WIFI3 Manual

22 Juli 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

DeWalt

DeWalt DXAM-2260 Manual

14 Juni 2025
AlorAir

AlorAir Zeus 900 Manual

14 Juni 2025
XPower

XPower B-55 Manual

14 Juni 2025
XPower

XPower B-2 Manual

14 Juni 2025
XPower

XPower M-27 Manual

14 Juni 2025
B-Air

B-Air Vent VP-34 Manual

14 Juni 2025
XPower

XPower P-80 Manual

14 Juni 2025
DeLonghi

DeLonghi JRE0812 Manual

14 Juni 2025
Aura

Aura CF15120B Manual

14 Juni 2025
XPower

XPower B-4 Manual

14 Juni 2025