Milwaukee 2213-20 Manual

Milwaukee Måling 2213-20

Læs gratis den danske manual til Milwaukee 2213-20 (20 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Milwaukee 2213-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S

MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL

MANUAL DEL OPERADOR.

AUTO VOLTAGE/CONTINUITY TESTER AND AUTO VOLTAGE/CONTINUITY

TESTER W/ RESISTANCE

TESTEUR AUTOMATIQUE DE TENSION/CONTINUITÉ ET TESTEUR

AUTOMATIQUE DE TENSION/CONTINUITÉ AVEC RÉSISTANCE

PROBADOR AUTOMÁTICO DE VOLTAJE/CONTINUIDAD Y PROBADOR

AUTOMÁTICO DE VOLTAJE/CONTINUIDAD CON RESISTENCIA

Cat. No.

No de cat.

2212-20

2213-20

IMPORTANT SAFETY INSTRUCTIONS

WARNING READ ALL SAFETY WARNINGS AND INSTRUCTIONS. Failure to follow

the warnings and instructions may result in electric shock, re and/or serious injury, as well as

instrument damage and/or damage to the equipment being tested. Save these instructions - This

operator’s manual contains important safety and operating instructions for the MILWAUKEE

Electrical Testers. Before using, read this operator’s manual and all labels on the Electrical Testers.

DANGER

Never make measurement on a circuit in which voltage over 600V rms exists. Use only leads

rated 600V CAT IV or better.

Do not apply more than the rated voltage, as marked on the Tester, between terminals or

between any terminal and earth ground.

Do not attempt to make measurement in the presence of ammable gases. Otherwise, the use

of the instrument may cause sparking, which can lead to an explosion.

Never attempt to use the instrument if its surface or your hand is wet.

Do not exceed the maximum allowable input of any measuring range.

Only test on unenergized circuits unless absolutely necessary.

Check tool functionality on a known circuit rst. Never assume tool is working. Assume circuits

are live until they can be proven de-energized.

Never open the Battery cover during a measurement.

Do not ground yourself while measuring. Avoid body contact with earthed or grounded sur-

faces such as pipes, radiators, ranges and refrigerators.

This instrument is to be used only in its intended applications or conditions. Otherwise, the instru-

ment's safety functions may not work, resulting in serious personal injury and instrument damage.

To reduce the risk of injury from shock and arc blasts, always wear personal protective

equipment where live conductors are exposed.

WARNING

Never attempt to make measurement if any abnormal conditions, such as broken case and

exposed metal parts are found on the instrument.

Comply with local and national safety requirements when working in hazardous locations.

Keep ngers behind the guards and away from test lead tips during measurements.

Do not change the slide switch position (Cat. No. 2213-20) while the test leads are being con-

nected.

Verify proper operation on a known source before use or taking action as a result of the in-

dication of the instrument.

Do not install substitute parts or make any modication to the instrument. For repair, return

the tool to a factory Service/Sales Support Branch or authorized service station.

Do not try to replace the batteries if the surface of the instrument is wet.

Disconnect all the cords and cables from the object under test and power o󰀨 the instrument

before opening the Battery Cover for Battery replacement.

This tool is designed to be powered by 2- AAA batteries properly inserted in the Milwaukee

Electrical Tester. Do not use with any other voltage or power supply.

Install battery according to polarity (+ and –) diagrams.

Do not leave batteries within the reach of children.

Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries.

Properly dispose of used batteries.

Do not incinerate or dismantle batteries.

Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact

accidentally occurs, ush with water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Måling
Model:	2213-20
Brugervejledning:	Ja
Produktfarve:	Rød
Produkttype:	Digitalt multimeter
Batteriteknologi:	Alkaline
Opbevaringstemperatur (T-T):	-10 - 60 °C
Driftstemperatur (T-T):	0 - 50 °C
Skærm:	LCD
Batterier inkluderet:	Ja
Strømkilde:	Batteri
Batteritype:	AAA
Antal understøttede batterier:	2
Understøttet placering:	Håndholdt multimeter
Driftshøjde:	0 - 2000 m
Batteriets levetid:	20 t
Baggrundslys:	Ja
Lydalarm:	Ja
DC spændingsområde:	200 - 600 V
AC-spæningsområde:	5 - 600 V
Modstandsområde:	2000 - 20000 ohm (Ω)
Kontinuitetscheck:	Ja
Målekategori:	CAT IV 600V
Opløsning (AC spænding):	1000 mV
Opløsning (DC spænding):	1000 mV
Opløsning for modstandsområde:	10 ohm (Ω)