Milwaukee 2882-20 Manual

Milwaukee Slibemaskine 2882-20

Læs gratis den danske manual til Milwaukee 2882-20 (32 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 35 anmeldelser. Har du et spørgsmål om Milwaukee 2882-20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
M18 FUEL™ 4-1/2" / 5" BRAKING GRINDER W/ ONE-KEY™
MEULEUSE À FREIN DE 115 mm / 125 mm (4-1/2" / 5")
M18 FUEL™ AVEC ONE-KEY™
RECTIFICADORA CON FRENO DE 115 mm / 125 mm
(4-1/2" / 5") M18 FUEL™ CON ONE-KEY™
Cat. No. / No de cat.
2888-20, 2889-20
M18 FUEL™ 4-1/2" / 5" VARIABLE SPEED BRAKING GRINDER
MEULEUSE À FREIN DE VITESSE VARIABLE DE
115 mm / 125 mm (4-1/2" / 5") M18 FUEL™
RECTIFICADORA CON FRENO DE VELOCIDAD VARIABLE
DE 115 mm / 125 mm (4-1/2" / 5") M18 FUEL™
Cat. No. / No de cat.
2882-20, 2883-20
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the switch does not
turn it on and o󰀨. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
a󰀨ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
di󰀨erent from those intended could result in a hazard-
ous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Slibemaskine
Model: 2882-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 2882-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibemaskine Milwaukee Manualer

Milwaukee

Milwaukee 0725-21 Manual

4 Oktober 2024
Milwaukee

Milwaukee 6147-31 Manual

15 September 2024
Milwaukee

Milwaukee HD18 AG115 Manual

2 September 2024
Milwaukee

Milwaukee AG 9-125 XE Manual

1 September 2024
Milwaukee

Milwaukee AGV 21-230 GEX Manual

1 September 2024
Milwaukee

Milwaukee HD18 AG125 Manual

1 September 2024
Milwaukee

Milwaukee DGL 34 Manual

1 September 2024
Milwaukee

Milwaukee DG 30 E Manual

1 September 2024
Milwaukee

Milwaukee 5192 Manual

1 September 2024
Milwaukee

Milwaukee AGV 17-180 XC DMS Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Einhell

Einhell BT-MG 160 KIT Manual

29 Marts 2025
Kraftronic

Kraftronic KT-WS 2000 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-WS 750 Set Manual

29 Marts 2025
NEO Tools

NEO Tools 14-014 Manual

28 Marts 2025
Makita

Makita 9500D Manual

28 Marts 2025
Bosch

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025
Metabo

Metabo WVBF 18 LT BL 11-125 Quick Manual

1 Februar 2025
Parkside

Parkside PEXS 270 A1 Manual

13 Januar 2025
Makita

Makita 9562CVR Manual

12 Januar 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual

11 Januar 2025