Milwaukee 3712 Manual

Milwaukee Ikke kategoriseret 3712

Læs gratis den danske manual til Milwaukee 3712 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Milwaukee 3712, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/15
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Cat. No. / No de Cat.
3712
GREEN INTERIOR ROTARY LASER REMOTE CONTROL
& RECEIVER
RÉCEPTEUR ET TÉLÉCOMMANDE DE LASER ROTATIF
INTÉRIEUR VERT
RECEPTOR Y CONTROL REMOTO DE LÁSER GIRATORIO
INTERIOR VERDE
2
3
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read and understand all instruc-
tions. Failure to follow all instructions
listed below, may result in electric shock, re and/or
serious personal injury. Save all warnings and in-
structions for future reference.
• Save these instructions - This operator's manual
contains important safety and operating instructions.
WORK AREA SAFETY
• Ensure adequate safeguards at the work site
(e.g., surveying site when measuring on roads,
construction sites, etc.).
• Avoid dangerous environments. Avoid extended
exposure to rain, snow, damp or wet locations. Do
not use in the presence of explosive atmospheres
(gaseous fumes, dust or ammable materials).
PERSONAL SAFETY
• Do not allow persons unfamiliar with the tool,
these safety instructions, and the tool's opera-
tor's manual to operate the tool. This tool can be
dangerous in the hands of untrained users.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the tool in unexpected situations.
BATTERY USE AND CARE
• This tool is designed to be powered by 2-AA
batteries properly inserted into the tool. Do not
attempt to use with any other voltage or power supply.
• Do not leave batteries within the reach of children.
• Do not mix new and used batteries. Do not mix
brands (or types within brands) of batteries.
• Do not mix rechargeable and non-rechargeable
batteries.
• Install batteries according to polarity (+ / –)
diagrams.
• Properly dispose of used batteries immediately.
• Do not incinerate or dismantle batteries.
• Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
SPECIFIC SAFETY RULES FOR
ROTARY LASER RECEIVER
• The device conforms to the most stringent
requirements of the relevant Electromagnetic
Compatibility (EMC) Standards and Regulations.
Yet, the possibility of causing interference in other
devices cannot be totally excluded.
•
CAUTION
Use of controls or adjustments or
performance of procedures other
than those specied herein may result in hazard-
ous radiation exposure.
• Be sure to power o󰀨 instrument after use. When
instrument will not be used for a long period, place
it in storage after removing batteries.
• Watch out for erroneous results if the tool is
defective or if it has been dropped, misused or
modied.
• Do not dispose of tool or batteries together with
household waste material! Tool and batteries that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
• Ensure tool magnets are securely mounted to
a metal surface. Magnet strength may not hold
on thin metal surfaces, causing the tool to fall.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Federal Communications Commission
WARNING
Changes or modications to
this unit not expressly ap-
proved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment o󰀨 and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
FUNCTIONAL DESCRIPTION
1. Laser locator
indicator LED
2. Bubble level
3. Speaker
4. Sensor
5. Magnets (4)
6. Back LCD screen
7. Battery door
8. Battery door turn lock
9. Clamp connection
feature
10. Wrist strap
attachment
11. Center line
12. Front LCD screen
13. Center nd button
14. Sweep button
15. D-pad
16. Main menu button
17. Power button
18. Surface vial
19. Clamp attachment
knob
20. Clamping knob
21. Clamp jaws
IN
IN
IN
IN
1
10
IN
IN
18
19
21
20
11
12
2
3 4
5
5
6
5
7
8
9
13
14
15
16
17
SYMBOLOGY
Volts
Direct Current
Magnets
Read Operator's Manual
Power Button
Center Find Button
Menu Button
Sweep Button
D-Pad
SPECIFICATIONS
Cat. No. ...........................................................3712
Volts........................................ 3 V (2xAA) LR6/15A
Module/FCC ID .......................... BL654/SQGBL654
Reception Angle ................................................ 70°
Wavelength Compatibility .................. 510 - 530 nm
Detection Range ................................ 15' up to 500'
Receiving Area ............................................... ±2.4"
Volume....................................................... ≥95 dBa
Altitude..........................................................<6560'
Pollution Degree .................................................. 2°
Ingress Protection............................................ IP67
(Battery compartment not included)
Drop Rating .......................................................2 m
Bare Tool Weight ..........................................0.9 lbs
(Without batteries)
Weight .............................................................1 lbs
(With 2xAA batteries)
Center Indication (From top)............................. 3.5"
Auto Shut-o󰀨 ................................................. 15 min
(No button press or laser detection)
Run Time .......................................................26 hrs
Remote Control Range ..................................... 400'
(Clear line of site with no obstructions)
Clamp Weight ...............................................0.4 lbs
Clamp Width ..................................................... 2.5"
Maximum Relative Humidity (RH) ................... 80%
for up to 88°F
Decreasing Linearly Relative Humidity (RH) ... 50%
at 104°F
Recommended Ambient
Storage Temperature ...................-13°F to 140°F
Operating Temperature .................. -4°F to 122°F
Recommended Compatible
Laser Cat. No. .......................................3702-20
NOTE: Distance, laser power, and other environ-
mental factors such as temperature, precipitation,
or ambient light conditions may negatively impact
product accuracy and range.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Ikke kategoriseret
Model: 3712

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 3712 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milwaukee Manualer

Milwaukee

Milwaukee 4932479730 Manual

16 September 2025
Milwaukee

Milwaukee WT 10 Manual

16 September 2025
Milwaukee

Milwaukee M18 BBPFP2-WST Manual

16 September 2025
Milwaukee

Milwaukee M18 FFSDC16 Manual

8 September 2025
Milwaukee

Milwaukee M18 FPFT Manual

8 September 2025
Milwaukee

Milwaukee M18 BLHPT Manual

8 September 2025
Milwaukee

Milwaukee M18 FFSDC13 Manual

7 September 2025
Milwaukee

Milwaukee M18 FUEL FPT2 Manual

7 September 2025
Milwaukee

Milwaukee M12 HPT Manual

7 September 2025
Milwaukee

Milwaukee M18 3019-21PS Manual

27 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vestil

Vestil HPRO-SS-36-42-4 Manual

2 Oktober 2025
VitalMaxx

VitalMaxx 01260 Manual

2 Oktober 2025
Vestil

Vestil VAN-J-AC Manual

2 Oktober 2025
Vestil

Vestil LPRO-92-9-4 Manual

2 Oktober 2025
Vollrath

Vollrath 7217810 Manual

2 Oktober 2025
Draper

Draper Expert 19224 Manual

2 Oktober 2025
Vestil

Vestil AHSN-4-15-7-TLC Manual

2 Oktober 2025
Draper

Draper Storm Force 65019 Manual

2 Oktober 2025
VitalMaxx

VitalMaxx 06870 Manual

2 Oktober 2025
Advantech

Advantech ARK-3532D Manual

2 Oktober 2025