Milwaukee 3714 Manual

Milwaukee Ikke kategoriseret 3714

Læs gratis den danske manual til Milwaukee 3714 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Milwaukee 3714, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
Cat. No. / No de Cat.
3714
DUAL SLOPE ROTARY LASER RECEIVER
RÉCEPTEUR DE LASER ROTATIF DOUBLE PENTE
RECEPTOR DE LÁSER GIRATORIO DE DOBLE PENDIENTE
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read and understand all instruc-
tions. Failure to follow all instructions
listed below, may result in electric shock, re and/or
serious personal injury. Save all warnings and in-
structions for future reference.
• Save these instructions - This operator's manual
contains important safety and operating instructions.
WORK AREA SAFETY
• Ensure adequate safeguards at the work site
(e.g., surveying site when measuring on roads,
construction sites, etc.).
• Avoid dangerous environments. Avoid extended
exposure to rain, snow, damp or wet locations. Do
not use in the presence of explosive atmospheres
(gaseous fumes, dust or ammable materials).
PERSONAL SAFETY
• Do not allow persons unfamiliar with the tool,
these safety instructions, and the tool's opera-
tor's manual to operate the tool. This tool can be
dangerous in the hands of untrained users.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the tool in unexpected situations.
BATTERY USE AND CARE
WARNING
Read and understand all instruc-
tions. Failure to follow all instruc-
tions may result in electric shock, re and/or
serious personal injury. Save these instructions.
• This tool is designed to be powered by AA batter-
ies properly inserted into the tool. Do not attempt
to use with any other voltage or power supply. Do
not use zinc-carbon batteries.
• Chemical Burn Hazard. A new or used battery
can cause severe internal burns and lead to
death in as little as 2 hours if swallowed or enters
the body. Keep away from children. If you think
batteries may have been swallowed or entered
the body, seek immediate medical attention.
• Do not mix new and used batteries. Do not mix
brands (or types within brands) of batteries.
• Do not mix rechargeable and non-rechargeable
batteries.
• Install batteries according to polarity (+/–)
diagrams. Do not install batteries backwards.
Batteries can explode or leak.
• Do not crush, drop, damage, or expose batteries
to high temperature. Under abusive conditions,
liquid may be ejected from the battery, avoid
contact. If contact accidentally occurs, ush
with water. If liquid contacts eyes, additionally
seek medical help.
• Do not incinerate or dismantle batteries. Prop-
erly dispose of used batteries immediately.
SPECIFIC SAFETY RULES FOR
ROTARY LASER RECEIVER
• The device conforms to the most stringent
requirements of the relevant Electromagnetic
Compatibility (EMC) Standards and Regulations.
Yet, the possibility of causing interference in other
devices cannot be totally excluded.
•
CAUTION
Use of controls or adjustments or
performance of procedures other
than those specied herein may result in hazard-
ous radiation exposure.
• Be sure to power o󰀨 instrument after use. When
instrument will not be used for a long period, place
it in storage after removing batteries.
• Watch out for erroneous results if the tool is
defective or if it has been dropped, misused or
modied.
• Do not dispose of tool or batteries together with
household waste material! Tool and batteries that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Federal Communications Commission
Pursuant to part 15.21 of the FCC Rules, you
are cautioned that changes or modications not
expressly approved by the party responsible for
compliance could void your authority to operate the
product.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o󰀨 and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
di󰀨erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules
and ISED-Canada’s license exempt RSS standards.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference,
and 2) This device must accept any interference
received, including interference that may cause
undesired operation.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Ikke kategoriseret
Model: 3714

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 3714 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milwaukee Manualer

Milwaukee

Milwaukee 4932479730 Manual

16 September 2025
Milwaukee

Milwaukee WT 10 Manual

16 September 2025
Milwaukee

Milwaukee M18 BBPFP2-WST Manual

16 September 2025
Milwaukee

Milwaukee M18 FFSDC16 Manual

8 September 2025
Milwaukee

Milwaukee M18 FPFT Manual

8 September 2025
Milwaukee

Milwaukee M18 BLHPT Manual

8 September 2025
Milwaukee

Milwaukee M18 FFSDC13 Manual

7 September 2025
Milwaukee

Milwaukee M18 FUEL FPT2 Manual

7 September 2025
Milwaukee

Milwaukee M12 HPT Manual

7 September 2025
Milwaukee

Milwaukee M18 3019-21PS Manual

27 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony

Sony EP-NI1010S Manual

2 Oktober 2025
Draper

Draper Expert 23193 Manual

2 Oktober 2025
Sony

Sony YT-ICB630 Manual

2 Oktober 2025
GYS

GYS Caliweld Manual

2 Oktober 2025
Draper

Draper Expert 15694 Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Fusion GHSS656RLB Manual

2 Oktober 2025
Gardol

Gardol GRW-E 57 Manual

2 Oktober 2025
Bluemarina

Bluemarina Mapuna Sport Manual

2 Oktober 2025
Draper

Draper Expert 16245 Manual

2 Oktober 2025
Draper

Draper Expert 64333 Manual

2 Oktober 2025