Milwaukee 48-03-3235 Manual

Milwaukee Ikke kategoriseret 48-03-3235

Læs gratis den danske manual til Milwaukee 48-03-3235 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Milwaukee 48-03-3235, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Cat. No. / No de cat.

48-03-3035

SDS PLUS DUST TRAP™ DRILLING SHROUD

DÉFLECTEUR DE POUSSIÈRE POUR PERCEUSE DUST TRAP™

SDS PLUS

CUBIERTA PROTECTORA PARA PERFORACIÓN DE DUST TRAP™

SDS PLUS

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

READ ALL SAFETY WARN-

INGS AND A L L I N S TRUC-

TIONS. Before use, read this instruction sheet, the

tool and dust extractor manuals, and all labels on the

bit, tool, and dust extractor. Failure to follow the

warnings and instructions may result in serious in-

jury. Save all warnings and instructions for future

reference.

• Use only with dust extractors with 'self-cleaning'

lters.

• Use the proper bit for the power tool. The bit

must properly t the tool.

• Wear a dust mask or use an OSHA compliant

dust extraction solution when working in dusty

situations. Dust particles can harm your lungs.

• This product is suitable for collection of silica

dust when used in accordance with these in-

structions. To reduce the risk of health hazards

from other vapors or dust, do not vacuum car-

cinogenic, toxic or hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pesticides

or other health endangered materials.

• Ensure unit is properly attached to power tool

before use.

•

WARNING

Some dust created by power sand-

ing, sawing, grinding, drilling, and

other construction activities contains chemicals

known to cause cancer, birth defects or other re-

productive harm. Some examples of these chemi-

cals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to lter out microscopic particles.

• The unit is compliant with Table 1 of OSHA

Standard 29CRF 1926.1153 assuming (1) it is

used in accordance with MILWAUKEE instruc-

tions; (2) it is attached to a dust collector that

has a lter with 99% or greater efciency and

a lter-cleaning mechanism. Please reference

https://www.osha.gov for further details on

compliance methods.

• The unit is compliant as an objective data solu-

tion of OSHA Standard 29CRF 1926.1153 when

it used without a dust collector, assuming it is

used in accordance with MILWAUKEE instruc-

tions. Please reference https://www.osha.gov

for further details on compliance methods.

READ AND SAVE ALL

INSTRUCTIONS

FOR FUTURE REFERENCE.

SYMBOLOGY

Read Operator's Manual

Always wear eye protection. Always

wear respiratory protection when not

using an OSHA compliant solution.

SPECIFICATIONS

Cat. No. 48-03-3035 ................................................

Max bit diameter 3/4" ...............................................

Max bit length 8" ......................................................

Vacuum port inner diameter 1-1/4" ..........................

Adaptor outer diameter 1-3/4" ..................................

Adaptor inner diameter 1-1/2" ..................................

Adaptor 49-90-1957 .................................................

FUNCTIONAL DESCRIPTION

6. Strap mounting tab

7. Strap

8. Vacuum plug

9. Vacuum port

10. Base

1. Spring rims

2. Spring

3. Plastic lm

4. Compression lock

5. Dust shroud lock

ASSEMBLY

Removing and Installing Dust Caps

To remove the dust cap, pinch the unit at the com-

pression locks. Twist and pull unit away from the

base.

To install the dust cap, thread the cap into the dust

shroud lock. Pinch at the compression locks and

twist to lock in place.

Replacement packs can be ordered under

MILWAUKEE part number 48-03-3235.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Ikke kategoriseret
Model:	48-03-3235

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 48-03-3235 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Milwaukee Manualer

Milwaukee M18 RADIUS 2145-20 Manual

13 August 2025

Milwaukee 6101 Manual

13 August 2025

Milwaukee M12 2446-20 Manual

13 August 2025

Milwaukee M12 Fuel 2522-20 Manual

13 August 2025

Milwaukee M18 RADIUS ONE-KEY 2147-20 Manual

13 August 2025

Milwaukee M18 HAMMERVAC 2712-DE Manual

13 August 2025

Milwaukee M12 2456-20 Manual

13 August 2025

Milwaukee M12 2472-20 Manual

13 August 2025

Milwaukee M12 3150-20 Manual

13 August 2025

Milwaukee HAMMERVAC M18 M28 49-90-2342 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenmore SM2050 Manual

17 August 2025

Vulcan VBB1CF Manual

17 August 2025

MSW -WPD-PVDC4/2 Manual

17 August 2025

Kenmore DU1275 Manual

17 August 2025

YA-MAN Bloom 5 Manual

17 August 2025

OSD Audio NERO-CONTROL12 Manual

17 August 2025

Singercon SIN-ALD-2000 Manual

17 August 2025

Vulcan VIB2 Manual

17 August 2025

Mars Gaming MNBC5 Manual

17 August 2025

Mars Gaming MNBC6 Manual

17 August 2025