Milwaukee 48-22-8435 Manual

Milwaukee Ikke kategoriseret 48-22-8435

Læs gratis den danske manual til Milwaukee 48-22-8435 (13 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Milwaukee 48-22-8435, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

2(2x)

6(2x)

4(2x)

Place flat blade

screwdriver in

here and work

pin to the inside.

Grab exposed pin with needle

nose pliers and work out.

Locking Tabs

Latch Assembly

NOTE:

See page 2 for

installation

instructions

of Retactable

Handle (3) into

tool box body.

54-49-8400

SERVICE PARTS LIST

BULLETIN NO.

MILWAUKEE TOOL l www.milwaukeetool.com

13135 W. LISBON RD., BROOKFIELD, WI 53005

Drwg. 7

EXAMPLE:

Component Parts (Small #) Are Included

When Ordering The Assembly (Large #).

48-22-8426

PACKOUT™ Rolling Tool Box Assembly Oct. 2020

REVISED BULLETIN

WIRING INSTRUCTION

DATE

CATALOG NO.

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

SERIAL

NUMBER

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 43-62-8400T Retractable Handle Grip Service Kit (1)

2 --------------- Screw (2)

3 43-62-8400 Retractable Handle Service Assembly (1)

4 --------------- Screw (2)

5 43-62-8426

Side Handle Svc. Kit (Contains 2 Side Handles and 4 Pins)

(1)

6 --------------- Pin (4)

7 45-94-8426

Wheel Svc. Kit (Contains 2 Wheels and 2 Locking Hex Nuts)

(1)

8 --------------- Locking Hex Nut (2)

9 44-20-8400 Latch Service Assembly (Set of 2) (1)

10 31-01-8400 Storage Tray (1)

11 43-44-8400 Lid Gasket (Not Shown) (1)

12 42-12-8426

Axle Svc. Kit (Contains 1 Axle and 2 Locking Hex Nuts)

(1)

As an aid to removing a damaged Latch

Assembly (9), use two large at blade

screwdrivers. Push blades between parts

as shown. Twist both screwdrivers at same

time to force the blades into opening

and work the latch assembly over the

two locking tabs.

To install a new latch assembly,

position entire latch assembly over

locking tabs with the two top lugs

partially inserted in 'catch cavity' of

main housing. Engage latch bar

onto lid and gently press latch lever

to slide assembly over two locking

tabs and into place.

This removal and installation process will be the same

where other service latches are oered in this system.

48-22-8425 PACKOUT™ Large Tool Box Assembly Page 3

48-22-8424 PACKOUT™ Medium Tool Box Assembly Page 3

48-22-8430 PACKOUT™ Organizer Assembly Page 4

48-22-8435 PACKOUT™ Compact Organizer Assembly Page 4

48-22-8310 PACKOUT™ Small 10" Storage Tote Page 5

48-22-8315 PACKOUT™ Medium 15" Storage Tote Page 5

48-22-8320 PACKOUT™ Large 20" Storage Tote Page 5

48-22-8426 Includes:

48-22-8431 PACKOUT™ Page 6S-Organizer Assembly

48-22-8436 PACKOUT™ S-Organizer Compact Assy. Page 6

48-22-8450 PACKOUT™ Tool Box Assembly Page 7

48-22-8321 PACKOUT™ Medium 15" Tool Bag Page 8

48-22-8322 PACKOUT™ Large 20" Tool Bag Page 8

48-22-8300 PACKOUT™ Tech Bag Page 9

48-22-8301 PACKOUT™ Jobsite Backpack Page 9

48-22-8302 PACKOUT™ Jobsite Cooler Page 9

48-22-8410 PACKOUT™ Flat Dolly Page 10

48-22-8422 PACKOUT™ Compact Toolbox Page 11

48-22-8460 PACKOUT™ Compact Cooler Page 11

48-22-8488 PACKOUT™ Customizable Work Surface Page 12

48-22-8415 PACKOUT™ 2 Wheeled Dolly Page 13

*See page 6 thru 13 for Additional Storage Products:

As an aid to installation, collapse the

Retractable Handle Assembly (3).

Properly orient the assembly and insert

both sides into tool box channels.

Holes of Retractable Handle Assembly (3)

must line up with holes on the back of tool

box body prior to securing with screws (4).

Extend Retractable Handle Assembly (3) beyond

bottom opening in tool box to see the holes that

must line up prior to securing with screws (4).

Push assembly back into channel so

bottom of handle section shown is

flush with bottom of channel. This

should be very close to aligning the

holes. To be sure, a thin pick can be

used in hole to make adjustments.

Push this area

into channel so

bottom is flush

to bottom of box

Both surfaces to be flush

Insert thin pick to

assure holes line up

Screws (4)

Rear View

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Ikke kategoriseret
Model:	48-22-8435
Bredde:	386 mm
Dybde:	249 mm
Højde:	46 mm
Produktfarve:	Black, Red, Transparent
Antal:	1
Håndtag:	Ja
Håndtag, antal:	1
Antal skuffer:	5 skuffe(r)