Milwaukee 48-22-8500 Manual
Milwaukee
Ikke kategoriseret
48-22-8500
Læs gratis den danske manual til Milwaukee 48-22-8500 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Milwaukee 48-22-8500, eller vil du spørge andre brugere om produktet?
Side 1/20
Cat. No. / No de cat.
48-22-8510, 48-22-8520
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Este manual se aplica a los modelos anteriores (puede venderse por separado)
46" 8 DRAWER STEEL STORAGE CHEST &
46" 8 DRAWER STEEL STORAGE CABINET
COFFRE DE RANGEMENT AVEC 8 TIROIRS EN ACIER 1,16 m
(46") ET PLACARD DE RANGEMENT AVEC 8 TIROIRS EN ACIER
1,16 m (46")
CAJA DE ALMACENAMIENTO CON 8 CAJONES DE ACERO DE
1,16 m (46") Y GABINETE DE ALMACENAMIENTO CON 8
CAJONES DE ACERO DE 1,16 m (46")
2
IMPORTANT SAFETY INSRUCTIONS
WARNING
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may re-
sult in serious injury. Save all warnings and in-
structions for future reference.
WORK AREA SAFETY
• -Use the chest/cabinet and accessories in ac
cordance with these instructions and in the
manner intended, taking into account the working
conditions. Use of the chest/cabinet for operations
dierent from those intended could result in a haz-
ardous situation.
•Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
•Fully assemble the chest/cabinet according to the
assembly instructions. Do not leave o any pieces.
•
Chest must be fastened by screws through
connectors after it has been placed on top of cabinet.
•Do not modify the chest/cabinet in any way. Use
only specically recommended accessories. Drilling
holes or modifying the chest/cabinet will lower the
load capacity, which can cause the chest/cabinet to
collapse, resulting in injury.
•Lock wheels when chest/cabinet is not being
moved. Unlocked wheels can allow the chest/
cabinet to move unexpectedly.
•Keep the chest/cabinet on a level surface. Do not
load, unload, or park chest/cabinet on an incline.
The chest/cabinet may become unbalanced and tip,
resulting in injury.
•Always balance the chest/cabinet load to avoid
tipping. Unbalanced chests/cabinets are more likely
to tip when being moved or when using the chest/
cabinet work surfaces. Evenly distribute the weight
front to back and side to side. Place more than half
the total load weight on the bottom cabinet when pos-
sible. To help prevent the chest/cabinet from tipping,
load the product starting with the bottom drawers.
• Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded chests/
cabinets can tip, collapse, or damage drawer slides.
• Do not open more than one drawer at a time.
Chest/cabinet may tip, causing injury.
•
Keep children and bystanders away while
loading, unloading, and moving chest/cabinet.
Distractions can cause you to lose control.
•Only lift the chest/cabinet according to the
instructions in this manual. Never lift by the
side handle. Other methods may be dangerous,
resulting in injury.
• Only transport the chest/cabinet when empty.
Properly secure when transporting.
• Do not mount the chest/cabinet on a truck bed
or any other moving object.
• Lock both the lid and all drawers before rolling
the chest/cabinet. The drawers could come open
and make the chest/cabinet unstable and tip.
• Only roll the chest/cabinet short distances by
using the handle provided.
• Secure all items before rolling the chest/cabinet.
Loose items could shift, causing the chest/cabinet
to become unstable.
• Do not use drawers as steps. Do not stand on the
chest/cabinet. Chest/cabinet will tip, causing injury.
• Be careful when closing the chest top cover.
Remove hands before closing the top cover.
• -Do not use chest/cabinet in explosive atmo
spheres, such as in the presence of ammable
liquids, gases or dust. This equipment has internal
arcing or sparking parts. Chest/cabinet should not
be located in a recessed area or below oor level.
•Chest/cabinet plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earth (grounded) chest/
cabinet power strips. Unmodied plugs and match-
ing outlets will reduce risk of electric shock.
•Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•Maintain chest/cabinet. Check for misalignment
or binding wheels, breakage or bending of drawer
slides or other parts and any other condition that
may aect the chest/cabinet's operation. Do not use
damaged chest/cabinet.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•Have your chest/cabinet serviced by a qualied
repair person using only identical replacement
parts. Visit a local authorized service center for
repairs. Components, such as the power strip, are
not user replaceable. This will ensure that the safety
of the chest/cabinet is maintained.
Federal Communications Commission
WARNING: Changes or modications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Produkt Specifikationer
| Mærke: | Milwaukee |
| Kategori: | Ikke kategoriseret |
| Model: | 48-22-8500 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Milwaukee 48-22-8500 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Milwaukee Manualer
8 Januar 2025
29 December 2024
13 December 2024
20 November 2024
19 November 2024
30 September 2024
23 September 2024
17 September 2024
16 September 2024
11 September 2024
Ikke kategoriseret Manualer
- Wëasy
- Everdure
- QZ
- Pro User
- BWT
- Ovation
- Xantech
- Newline
- Ghibli
- Texas
- Axagon
- Prologue
- Oatey
- Iogear
- Hex
Nyeste Ikke kategoriseret Manualer
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025