Milwaukee 48-22-8539 Manual

Milwaukee Ikke kategoriseret 48-22-8539

Læs gratis den danske manual til Milwaukee 48-22-8539 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Milwaukee 48-22-8539, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Cat. No. / No de cat.

48-22-8539, 48-22-8540

40" MOBILE WORK STATION

POSTE DE TRAVAIL MOBILE DE 1,01 m (40")

ESTACIÓN DE TRABAJO MÓVIL DE 1,01 m (40")

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in serious in-

jury. Save all warnings and instructions for future

reference.

•Use the station and accessories in accordance

with these instructions and in the manner in-

tended, taking into account the working conditions.

Use of the station for operations dierent from those

intended could result in a hazardous situation.

•Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• -Fully assemble the station according to the as

sembly instructions. Do not leave o any pieces.

•Do not modify the station in any way. Use only

specifically recommended accessories. Drilling

holes or modifying the station will lower the load

capacity, which can cause the station to collapse,

resulting in injury.

•Lock wheels when station is not being moved.

Unlocked wheels can allow the station to move

unexpectedly.

•Keep the station on a level surface. Do not load,

unload, or park station on an incline. The station

may become unbalanced and tip, resulting in injury.

•Always balance the station load to avoid tipping.

Unbalanced stations are more likely to tip when be-

ing moved or when using the station work surfaces.

Evenly distribute the weight front to back and side

to side. To help prevent the station from tipping,

load the product starting with the bottom drawers.

• Do not exceed the maximum product weight,

including contents. Do not exceed the maximum

weight for each drawer. Overloaded stations can

tip, collapse, or damage drawer slides.

• Do not open more than one drawer at a time.

Station may tip, causing injury.

•Keep children and bystanders away while load-

ing, unloading, and moving the station. Distrac-

tions can cause you to lose control.

•Only lift the station according to the instructions

in this manual. Never lift by the side handle. Other

methods may be dangerous, resulting in injury.

• Only transport the station when empty. Properly

secure when transporting.

• Do not mount the station on a truck bed or any

other moving object.

• Lock all drawers before rolling the station. The

drawers could come open and make the station

unstable and tip.

• Only roll the station short distances by using

the handle provided.

• Secure all items before rolling the station. Loose

items could shift, causing the station to become

unstable.

• Do not use drawers as steps. Do not stand

on the station. Station may tip, causing injury.

• Do not step on side shelf. Shelf may collapse or

break. Station may tip, causing injury.

•Do not use station in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. This equipment has internal arcing or spark-

ing parts. Station should not be located in a recessed

area or below oor level.

•Station plugs must match the outlet. Never mod-

ify the plug in any way. Do not use any adapter

plugs with earth (grounded) chest/cabinet power

strips. Unmodied plugs and matching outlets will

reduce risk of electric shock.

•Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•Maintain station. Check for misalignment or bind-

ing wheels, breakage or bending of drawer slides or

other parts and any other condition that may aect

the station's operation. Do not use damaged station.

•Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•Have your station serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the station is

maintained.

Federal Communications Commission

WARNING: Changes or modications to this unit

not expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harm-

ful interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment o and on, the user is encouraged to try

to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Ikke kategoriseret
Model:	48-22-8539

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 48-22-8539 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Milwaukee Manualer

Milwaukee M18 RADIUS 2145-20 Manual

13 August 2025

Milwaukee 6101 Manual

13 August 2025

Milwaukee M12 2446-20 Manual

13 August 2025

Milwaukee M12 Fuel 2522-20 Manual

13 August 2025

Milwaukee M18 RADIUS ONE-KEY 2147-20 Manual

13 August 2025

Milwaukee M18 HAMMERVAC 2712-DE Manual

13 August 2025

Milwaukee M12 2456-20 Manual

13 August 2025

Milwaukee M12 2472-20 Manual

13 August 2025

Milwaukee M12 3150-20 Manual

13 August 2025

Milwaukee HAMMERVAC M18 M28 49-90-2342 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW -AIRS1290ASN Manual

17 August 2025

Mueller SC 98.47 pro Manual

17 August 2025

MSW -WPW-20 Manual

17 August 2025

Planet WGS-4215-8P2X Manual

17 August 2025

Mueller SC 98.40 knx Manual

17 August 2025

MSW -MS76A Manual

17 August 2025

MSW -HFCV-40-C Manual

17 August 2025

Mars Gaming MCPU-XU9 Manual

17 August 2025

Mars Gaming MPS5-B Manual

17 August 2025

B-Tech BT8566 Manual

17 August 2025