Milwaukee 48-22-8690 Manual

Milwaukee Ikke kategoriseret 48-22-8690

Læs gratis den danske manual til Milwaukee 48-22-8690 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Milwaukee 48-22-8690, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Cat. No. / No de cat.
48-22-8690
6" LEVELING TRIPOD CHAIN VISE
ÉTAU À CHAÎNE POUR TRÉPIED DE MISE-À-NIVEAU DE
150 mm (6")
TORNILLO DE BANCO CON CADENA PARA TRIPIÉ DE
NIVELACIÓN DE 150 mm (6")
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
SPECIFIC SAFETY RULES
TRIPOD CHAIN VISE
WARNING
Read all safety warnings and all
instructions provided with the tri-
pod chain vise and any power tools to be used
with the tripod chain vise. Failure to follow the
warnings and instructions may result in electric
shock, re and/or serious injury. Save all warn-
ings and instructions for future reference.
• Properly assemble the tripod chain vise before use.
Proper assembly is important to prevent risk of collapse.
• Place the tripod chain vise on a solid, at and
level surface. When the tripod chain vise can shift or
rock, the power tool or workpiece cannot be steadily
and safely controlled.
• When collapsed, place tripod chain vise on it's
side or secure before leaving unattended. Leaving
the collapsed tripod chain vise vertically may cause
the tripod chain vise to tip over.
• Do not overload the tripod chain vise or use as
ladder or sca󰀨olding. Overloading or standing on
the tripod chain vise may cause the pipe to fall, or
the tripod chain vise to tip over, causing injury.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Avoid dangerous environments. Use the tripod
chain vise on at, level, dry, and hard surfaces only.
• Keep work area clean and well lit. Cluttered, dark
work areas invite accidents.
• Maintain control. Keep proper footing and balance
at all times.
• Maintain tripod chain vise carefully. Keep tripod
chain vise dry, clean and free from oil and grease.
Follow instructions for changing accessories. Periodi-
cally inspect tripod chain vise for damage and wear.
• Keep bystanders away. Children and bystanders
should be kept at a safe distance from the work area
to avoid distracting the operator.
• To reduce the risk of injury, always wear eye
protection.
• Inspect the tripod chain vise and screws periodi-
cally and replace immediately if cracked, worn, or
damaged. Do not attempt to x or mend damaged
tripod chain vise or fasteners.
• Fingers can be pinched between the legs and
the underside of the tabletop. To reduce the risk
of injury, keep ngers out of the areas where the
legs will secure into place.
• To prevent pipe from slipping, inspect jaws and
replace when teeth are worn.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
SYMBOLOGY
Read Operator's Manual
No hands zone
Crush hands
Safety alert symbol
Place hand here
Hand grip
1
Attach turnbuckle
2
Twist turnbuckle to tighten
Pinching ngers hazard
FUNCTIONAL DESCRIPTION
2
3
5
6
8
1. Pipe secondary support
2. Leg locking fold latch
3. Carry handle
4. Oil drain holes
5. Chain tightening handle
6. Chain vise
7. Workspace tabletop
8. Turnbuckle
9. Rear handle
10. Level adjuster
11. T-bar foot
11
4
7
1
9
10

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Ikke kategoriseret
Model: 48-22-8690

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 48-22-8690 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milwaukee Manualer

Milwaukee

Milwaukee 9571 Manual

16 Juli 2025
Milwaukee

Milwaukee 48-22-8690 Manual

16 Juli 2025
Milwaukee

Milwaukee 48-06-2871 Manual

16 Juli 2025
Milwaukee

Milwaukee 0100-20 Manual

16 Juli 2025
Milwaukee

Milwaukee 9565 Manual

16 Juli 2025
Milwaukee

Milwaukee M18 Fuel ONE-KEY 2661-20 Manual

16 Juli 2025
Milwaukee

Milwaukee 9566 Manual

16 Juli 2025
Milwaukee

Milwaukee 0302-20 Manual

16 Juli 2025
Milwaukee

Milwaukee 49-22-8510 Manual

16 Juli 2025
Milwaukee

Milwaukee MXF DR350VP Manual

16 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Reer

Reer Mama Exercise Ball 31081 Manual

16 Juli 2025
CYP

CYP AU-DTI4-TX Manual

16 Juli 2025
Fischer

Fischer TherMax 10/140 M6 Manual

16 Juli 2025
Yamaha

Yamaha DME8i-C Manual

16 Juli 2025
Advantech

Advantech RSB-3720WD-BCA2E Manual

16 Juli 2025
Digigram

Digigram ALP882e Manual

16 Juli 2025
Russell Hobbs

Russell Hobbs 27080-56 Manual

16 Juli 2025
CYP

CYP PUV-1082PL-4K22N Manual

16 Juli 2025
Ultimate Speed

Ultimate Speed UMAP 12000 D4 Manual

16 Juli 2025
CYP

CYP WPS-QPM01 Manual

16 Juli 2025