Milwaukee 5194 Manual

Milwaukee Kværn 5194

Læs gratis den danske manual til Milwaukee 5194 (20 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Milwaukee 5194, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Cat. No. / No de cat.

5192, 5194, 5196

HEAVY-DUTY DIE GRINDERS

EXTRA ROBUSTE RECTIFIEUSES POUR MATRICES

HEAVY DUTY RECTIFICADOR DE MATRICES

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

•

Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools. Un-

modied plugs and matching outlets will reduce risk

of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a power tool outdoors, use an ex-

tension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not

use a power tool while you are tired or under the

inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result

in serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do no

t force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

• Store

idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Pow-

er tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazard-

ous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES FOR

DIE GRINDERS

Safety Warnings Common for Grinding, Sanding,

Wire Brushing, Polishing, Carving or Abrasive

Cutting-Off Operations:

• This power tool is intended to function as a grinder,

sander, wire brush, polisher, carving or cut-off tool.

• Do not use accessories which are not specically

designed and recommended by the tool manufacturer.

Just because the accessory can be attached to

your power tool, it does not assure safe operation.

• The rated speed of the accessories must be at least

equal to the maximum speed marked on the power

tool. Accessories running faster than their rated speed

can break and y apart.

• The outside diameter and the thickness of your

accessory must be within the capacity rating of

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Kværn
Model:	5194

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 5194 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kværn Milwaukee Manualer

Milwaukee M12 BLROT Manual

1 September 2025

Milwaukee M12 Fuel 2486-20 Manual

13 August 2025

Milwaukee M18 Fuel 2888-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-22 Manual

13 August 2025

Milwaukee M18 Fuel 2889-20 Manual

13 August 2025

Milwaukee M18 Fuel 2887-20 Manual

12 August 2025

Milwaukee AG 800-125 EK Manual

9 August 2025

Milwaukee AG 24-230 E Manual

9 August 2025

Milwaukee AGV 22-180 E Manual

9 August 2025

Kværn Manualer

Nyeste Kværn Manualer

Duro D-SG 161 Manual

14 September 2025

Bosch GWS 20-230 H Manual

12 September 2025

Makita GA5095 Manual

11 September 2025

Makita GA9071 Manual

11 September 2025

Bosch GWS 27-180 JR Professional Manual

11 September 2025

Bosch GWS 27-230 PR Professional Manual

10 September 2025

Graphite 59G207 Manual

9 September 2025

Graphite 59G110 Manual

9 September 2025

Metabo G 3612DB Manual

8 September 2025

DeWalt DWE46125 Manual

8 September 2025