Milwaukee 6089-31 Manual

Milwaukee Kværn 6089-31

Læs gratis den danske manual til Milwaukee 6089-31 (36 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Milwaukee 6089-31, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Cat. No.

No de Cat.

6088-30

6088-31

6089-30

6089-31

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL OPERADOR.

HEAVY-DUTY SANDERS AND GRINDERS

PONCEUSES-RECTIFIEUSES EXTRA ROBUSTES

LIJADORAS Y ESMERILADORAS HEAVY-DUTY

page 2

GENERAL POWER TOOL SAFETY WARNINGS

WORK AREA SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

POWER TOOL USE AND CARE

SERVICE

WARNING

READ ALL SAFETY WARNINGS AND INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference

The term "power tool" in all of the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SPECIFIC SAFETY RULES

• Keep work area clean and well lit. Cluttered or dark areas invite ac-

cidents.

• Do not operate power tools in explosive atmospheres, such as in

the presence of ﬂ ammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

• Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets will reduce risk of electric

shock.

• Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a power tool outdoors, use an extension cord suit-

able for outdoor use. Use of a cord suitable for outdoor use reduces the

risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in serious personal

injury.

• Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate conditions will reduce personal

injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with your ﬁ nger on the switch

or plugging in power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of these devices can reduce dust-related hazards.

• Do not force the power tool. Use the correct power tool for your ap-

plication. The correct power tool will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and oﬀ.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

• Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing ac-

cessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in the hands of untrained

users.

• Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may aﬀect the

power tool operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc., in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations diﬀerent

from those intended could result in a hazardous situation.

• Have your power tool serviced by a qualiﬁ ed repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

Safety Warnings Common for Grinding, Sanding, Wire Brushing or

Abrasive Cutting-Oﬀ Operations:

• This power tool is intended to function as a grinder, sander, wire

brush or cut-of tool. Read all safety warnings, instructions, illus-

trations and speciﬁ

cations provided with this power tool.

Failure to

follow all instructions listed below may result in electric shock, ﬁ re and/or

serious injury.

• Operations such as polishing are not recommended to be performed

with this power tool. Operations for which the power tool was not de-

signed may create a hazard and cause personal injury.

• Do not use accessories which are not speciﬁ cally designed and

recommended by the tool manufacturer. Just because the accessory

can be attached to your power tool, it does not assure safe operation.

• The rated speed of the accessory must be at least equal to the

maximum speed marked on the power tool. Accessories running faster

than their rated speed can break and ﬂ y apart.

• The outside diameter and the thickness of your accessory must

be within the capacity rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or controlled.

• The arbour size of wheels, ﬂ anges, backing pads or any other acces-

sory must properly ﬁ

t the spindle of the power tool.

Accessories with

arbour holes that do not match the mounting hardware of the power tool will

run out of balance, vibrate excessively and may cause loss of control.

• Do not use a damaged accessory. Before each use inspect the

accessory such as abrasive wheels for chips and cracks, backing

pad for cracks, tear or excess wear, wire brush for loose or cracked

wires. If power tool or accessory is dropped, inspect for damage or

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Kværn
Model:	6089-31

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 6089-31 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kværn Milwaukee Manualer

Milwaukee M12 BLROT Manual

1 September 2025

Milwaukee M12 Fuel 2486-20 Manual

13 August 2025

Milwaukee M18 Fuel 2888-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-22 Manual

13 August 2025

Milwaukee M18 Fuel 2889-20 Manual

13 August 2025

Milwaukee M18 Fuel 2887-20 Manual

12 August 2025

Milwaukee AG 800-125 EK Manual

9 August 2025

Milwaukee AG 24-230 E Manual

9 August 2025

Milwaukee AGV 22-180 E Manual

9 August 2025

Kværn Manualer

Nyeste Kværn Manualer

Duro D-SG 161 Manual

14 September 2025

Bosch GWS 20-230 H Manual

12 September 2025

Makita GA5095 Manual

11 September 2025

Makita GA9071 Manual

11 September 2025

Bosch GWS 27-180 JR Professional Manual

11 September 2025

Bosch GWS 27-230 PR Professional Manual

10 September 2025

Graphite 59G207 Manual

9 September 2025

Graphite 59G110 Manual

9 September 2025

Metabo G 3612DB Manual

8 September 2025

DeWalt DWE46125 Manual

8 September 2025