Milwaukee 6101 Manual

Milwaukee Ikke kategoriseret 6101

Læs gratis den danske manual til Milwaukee 6101 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Milwaukee 6101, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
Cat. No.
No de cat.
6101
HEAVY-DUTY BANDFILE
LIMEUSE À BANDE EXTRA ROBUSTE
HEAVY DUTY CINTA ABRASIVA CONTINUA
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
2
3
FUNCTIONAL DESCRIPTION
1. Side handle
2. Belt housing
3. Belt tracking knob
4. Belt
5. Contact arm wheel
6. Contact arm
7. Belt guard
8
9
10
1
5
4
6
7
2
3
8. Drive wheel
9. Tension arm
10. Clamp screw
SPECIFICATIONS
Cat.
No.
Volts
AC
A Belt Size
Feet per
Minute
6101 120 5.5 1/2" x 18" 2300
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces,
because the belt may contact its own cord.
Cutting a “live” wire may make exposed metal
parts of the tool “live” and could give the operator
an electric shock.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• WARNING Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to fi lter out microscopic particles.
Double Insulated
Volts
Alternating Current
Amps
SFPM
No Load Surface Feet
per Minute (SFPM)
Underwriters Laboratories, Inc.
United States and Canada
SYMBOLOGY
PERSONAL SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive at-
mospheres, such as in the presence of fl am-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or
serious injury. Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
SERVICE
• Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Ikke kategoriseret
Model: 6101

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 6101 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milwaukee Manualer

Milwaukee

Milwaukee 4932479730 Manual

16 September 2025
Milwaukee

Milwaukee WT 10 Manual

16 September 2025
Milwaukee

Milwaukee M18 BBPFP2-WST Manual

16 September 2025
Milwaukee

Milwaukee M18 FFSDC16 Manual

8 September 2025
Milwaukee

Milwaukee M18 FPFT Manual

8 September 2025
Milwaukee

Milwaukee M18 BLHPT Manual

8 September 2025
Milwaukee

Milwaukee M18 FFSDC13 Manual

7 September 2025
Milwaukee

Milwaukee M18 FUEL FPT2 Manual

7 September 2025
Milwaukee

Milwaukee M12 HPT Manual

7 September 2025
Milwaukee

Milwaukee M18 3019-21PS Manual

27 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Structural Concepts

Structural Concepts Reveal NE3620HSSV Manual

2 Oktober 2025
Advantech

Advantech FWA-4030 Manual

2 Oktober 2025
Vestil

Vestil ULTT-5448-6-YEL230-1 Manual

2 Oktober 2025
TC Electronic

TC Electronic Duplicator Manual

2 Oktober 2025
Axxess

Axxess AXTC-HN1 Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Reveal NE3635RSSV Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Fusion GP541RRLB Manual

2 Oktober 2025
Dillinger Labs

Dillinger Labs StreetHeart SKAA Pro Manual

2 Oktober 2025
Draper

Draper 02931 Manual

2 Oktober 2025
Mirage

Mirage 74110240 Manual

2 Oktober 2025