Milwaukee M12 2323-21 Manual

Milwaukee Ikke kategoriseret M12 2323-21

Læs gratis den danske manual til Milwaukee M12 2323-21 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Milwaukee M12 2323-21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Cat. No. / No de cat.

2323-20, 2324-20

M12™ M-SPECTOR™ 360 INSPECTION CAMERA

CAMÉRA D’INSPECTION M12™ M-SPECTOR™ 360

CÁMARA DE INSPECCIÓN M12™ M-SPECTOR™ 360

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings and all

instructions, illustrations and

specications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future

reference. The term "power tool" in the warnings

refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Do not operate power tool in an area where it

could contact electrical wiring or an electrically

charged object. Contact with a "live" wire or

object will make exposed metal parts of the tool

"live" and shock the operator.

• Do not operate power tool near moving ma-

chinery. The cable can be tangled in moving parts,

pulling in the power tool and your hands and arms.

• Do not use near any heat sources such as ra-

diators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

• Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

ELECTRICAL SAFETY

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the risk

of electric shock. Dry hands before turning tool on or

o󰀨 and before removing or installing the battery pack.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

POWER TOOL USE AND CARE

• This Inspection Scope is not intended for medi-

cal use or personal inspection.

• Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

• Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may a󰀨ect the power

tool operation. Do not use if power tool smokes

or gives o󰀨 fumes. If damaged, have the power

tool repaired before use. Many accidents are

caused by poorly maintained power tools.

• Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations di󰀨erent from those intended could

result in a hazardous situation. Only use accessories

specically recommended for this tool. Others may

be hazardous.

• Clean only with dry cloth. Certain cleaning agents

and solvents are harmful to plastics and other

insulated parts. Some of these include: gasoline,

turpentine, lacquer thinner, paint thinner, chlorinated

cleaning solvents, ammonia and household deter-

gents containing ammonia. Clean dust and debris

from vents. Keep the apparatus handle clean, dry

and free of oil or grease.

BATTERY USE AND CARE

• Always remove the battery pack before cleaning.

• This tool is designed to be powered by a 12 volt

MILWAUKEE battery pack. Do not attempt to use

with any other voltage or power supply.

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects like paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

SERVICE

• Contact a MILWAUKEE service facility for ALL

repairs. Have your power tool serviced by a

qualied repair person using only identical re-

placement parts. This will ensure that the safety

of the power tool is maintained.

• Never disassemble the power tool or try to do any

rewiring on the power tool’s electrical system.

SPECIFIC SAFETY RULES FOR

INSPECTION CAMERA

• Do not store the tool in an area of high heat or

humidity. Do not expose the tool to extended

high heat from the sun (such as on a vehicle

dashboard.) Damage to the product or the battery

pack can result.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Ikke kategoriseret
Model:	M12 2323-21

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M12 2323-21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Milwaukee Manualer

Milwaukee M18 RADIUS 2145-20 Manual

13 August 2025

Milwaukee 6101 Manual

13 August 2025

Milwaukee M12 2446-20 Manual

13 August 2025

Milwaukee M12 Fuel 2522-20 Manual

13 August 2025

Milwaukee M18 RADIUS ONE-KEY 2147-20 Manual

13 August 2025

Milwaukee M18 HAMMERVAC 2712-DE Manual

13 August 2025

Milwaukee M12 2456-20 Manual

13 August 2025

Milwaukee M12 2472-20 Manual

13 August 2025

Milwaukee M12 3150-20 Manual

13 August 2025

Milwaukee HAMMERVAC M18 M28 49-90-2342 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Optimate 7 Select Manual

14 August 2025

Sauermann SI-1801 Manual

14 August 2025

Atlona AT-VGW-HW-T Manual

14 August 2025

Crestron CLTI-2DIM2 Manual

14 August 2025

American Audio Warp Tri LED Manual

14 August 2025

Rowenta Adagio CG3015 Manual

14 August 2025

Lorex D871A81B Manual

14 August 2025

Philips SB7S17S Manual

14 August 2025

Candy CH32XK Manual

14 August 2025

Renkforce RBP-ALC100 Manual

14 August 2025