Milwaukee M12 Fuel 2522-21XC Manual

Milwaukee Ikke kategoriseret M12 Fuel 2522-21XC

Læs gratis den danske manual til Milwaukee M12 Fuel 2522-21XC (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Milwaukee M12 Fuel 2522-21XC, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
Cat. No. / No de cat.
2522-20
M12 FUEL™ 3" CUT OFF TOOL
OUTIL DE SECTIONNEMENT DE 76 mm (3") M12 FUEL™
HERRAMIENTA DE CORTE DE 76 mm (3") M12 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, re and/or serious injury. Save all warnings
and instructions for future reference. The term
"power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not
turn it on and o󰀨. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may a󰀨ect
the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
di󰀨erent from those intended could result in a hazard-
ous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Ikke kategoriseret
Model: M12 Fuel 2522-21XC

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M12 Fuel 2522-21XC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milwaukee Manualer

Milwaukee

Milwaukee M18 RADIUS 2145-20 Manual

13 August 2025
Milwaukee

Milwaukee 6101 Manual

13 August 2025
Milwaukee

Milwaukee M12 2446-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 2522-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 RADIUS ONE-KEY 2147-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 HAMMERVAC 2712-DE Manual

13 August 2025
Milwaukee

Milwaukee M12 2456-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 2472-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 3150-20 Manual

13 August 2025
Milwaukee

Milwaukee HAMMERVAC M18 M28 49-90-2342 Manual

13 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Mueller

Mueller AS 10.00 knx Manual

18 August 2025
Ecler

Ecler VEO-XRT44 Manual

18 August 2025
Daikin

Daikin RRDQ220V1 Manual

18 August 2025
MSW

MSW -C&A HP MX2 Manual

17 August 2025
Schellenberg

Schellenberg Smart Drive 10 Premium Manual

17 August 2025
Intergas

Intergas Xclusive 30 Manual

17 August 2025
Ambient Weather

Ambient Weather WS-1553-IP Manual

17 August 2025
Mars Gaming

Mars Gaming MF-PWMX2 Manual

17 August 2025
Daikin

Daikin RXL20K3V1B Manual

17 August 2025
Taiji

Taiji HC-18F Manual

17 August 2025