Milwaukee M18 Fuel 2764-22 Manual

Milwaukee Skruemaskine M18 Fuel 2764-22

Læs gratis den danske manual til Milwaukee M18 Fuel 2764-22 (16 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 2764-22, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Cat. No. / No de cat.
2762-20, 2763-20, 2764-20, 2765-20
M18™ FUEL™ 7/16" HEX IMPACT WRENCHES, 1/2" IMPACT
WRENCHES & 3/4" IMPACT WRENCH
CLÉS À CHOCS HEXAGONAL 11 mm (7/16"), CLÉS À CHOCS
DE 1/2" & CLÉS À CHOCS DE 3/4" DE M18™ FUEL™
LLAVES DE IMPACTO HEXAGONAL DE 11 mm (7/16"), LLAVES
DE IMPACTO DE 1/2" & LLAVES DE IMPACTO DE 3/4" DE
M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazard-
ous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Skruemaskine
Model: M18 Fuel 2764-22

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 2764-22 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skruemaskine Milwaukee Manualer

Milwaukee

Milwaukee M12 BLIDRC Manual

16 Juni 2025
Milwaukee

Milwaukee M18 BLHIWF12 Manual

16 Juni 2025
Milwaukee

Milwaukee M12 BLDDRC Manual

16 Juni 2025
Milwaukee

Milwaukee M12 BPD Manual

24 Oktober 2024
Milwaukee

Milwaukee 2769-20 Manual

7 Oktober 2024
Milwaukee

Milwaukee 2455-20 Manual

27 September 2024
Milwaukee

Milwaukee 2868-20 Manual

20 September 2024
Milwaukee

Milwaukee 2759-20 Manual

20 September 2024
Milwaukee

Milwaukee M18 Fuel One-Key 2857-22CT Manual

17 September 2024
Milwaukee

Milwaukee M18 Fuel 2855-22 Manual

17 September 2024

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Hyundai

Hyundai IW20X-700 Manual

19 Juni 2025
Xiaomi

Xiaomi Precision Screwdriver BHR5474GL Manual

19 Juni 2025
RYOBI

RYOBI FVD01 Manual

16 Juni 2025
Draper

Draper D20 55375 Manual

16 Juni 2025
Draper

Draper Storm Force 89518 Manual

8 Juni 2025
Draper

Draper 83745 Manual

8 Juni 2025
Draper

Draper 70332 Manual

8 Juni 2025
Draper

Draper 70260 Manual

7 Juni 2025
Draper

Draper D20 99250 Manual

7 Juni 2025
Draper

Draper Expert 41096 Manual

7 Juni 2025