Milwaukee M18 Fuel 2962P-22R Manual

Milwaukee Skruemaskine M18 Fuel 2962P-22R

Læs gratis den danske manual til Milwaukee M18 Fuel 2962P-22R (9 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 2962P-22R, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
Cat. No. / No de cat.
2960-20, 2962-20, 2962P-20
M18 FUEL™ 3/8" OR 1/2" MID-TORQUE IMPACT W/ FRICTION
RING OR PIN DETENT
CLÉS À CHOC À COUPLE MOYEN DE 3/8" OU 1/2" AVEC
ANNEAU DE FRICTION OU GOUPILLE D'ARRÊT M18 FUEL™
LLAVE DE IMPACTO DE MEDIO TORQUE DE 3/8" O 1/2" CON
ANILLO DE FRICCIÓN O RETÉN DE PASADOR M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not turn
it on and o󰀨. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may a󰀨ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations di󰀨erent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Skruemaskine
Model: M18 Fuel 2962P-22R

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 2962P-22R stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skruemaskine Milwaukee Manualer

Milwaukee

Milwaukee M12 BLIDRC Manual

16 Juni 2025
Milwaukee

Milwaukee M18 BLHIWF12 Manual

16 Juni 2025
Milwaukee

Milwaukee M12 BLDDRC Manual

16 Juni 2025
Milwaukee

Milwaukee M12 BPD Manual

24 Oktober 2024
Milwaukee

Milwaukee 2769-20 Manual

7 Oktober 2024
Milwaukee

Milwaukee 2455-20 Manual

27 September 2024
Milwaukee

Milwaukee 2868-20 Manual

20 September 2024
Milwaukee

Milwaukee 2759-20 Manual

20 September 2024
Milwaukee

Milwaukee M18 Fuel One-Key 2857-22CT Manual

17 September 2024
Milwaukee

Milwaukee M18 Fuel 2855-22 Manual

17 September 2024

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Hyundai

Hyundai IW20X-700 Manual

19 Juni 2025
Xiaomi

Xiaomi Precision Screwdriver BHR5474GL Manual

19 Juni 2025
RYOBI

RYOBI FVD01 Manual

16 Juni 2025
Draper

Draper D20 55375 Manual

16 Juni 2025
Draper

Draper Storm Force 89518 Manual

8 Juni 2025
Draper

Draper 83745 Manual

8 Juni 2025
Draper

Draper 70332 Manual

8 Juni 2025
Draper

Draper 70260 Manual

7 Juni 2025
Draper

Draper D20 99250 Manual

7 Juni 2025
Draper

Draper Expert 41096 Manual

7 Juni 2025