Milwaukee M18 Fuel ONE-KEY 2915-22 Manual

Milwaukee Hamer M18 Fuel ONE-KEY 2915-22

Læs gratis den danske manual til Milwaukee M18 Fuel ONE-KEY 2915-22 (20 sider) i kategorien Hamer. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel ONE-KEY 2915-22, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
M18 FUEL™ 1-1/8" SDS PLUS ROTARY HAMMER
W/ ONE-KEY™
PERCEUSE À PERCUSSION DE 28 mm (1-1/8") SDS PLUS
AVEC ONE-KEY™
ROTOMARTILLO SDS PLUS DE 28 mm (1-1/8") CON ONE-KEY™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Cat. No. / No de cat.
2915-20
SDS
PLUS
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not turn
it on and o󰀨. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may a󰀨ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations di󰀨erent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Hamer
Model: M18 Fuel ONE-KEY 2915-22

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel ONE-KEY 2915-22 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hamer Milwaukee Manualer

Milwaukee

Milwaukee M18 Fuel ONE-KEY 2915-22 Manual

4 Oktober 2024
Milwaukee

Milwaukee M12 Fuel 2416-22 Manual

16 September 2024
Milwaukee

Milwaukee K 1000 S Manual

30 August 2024
Milwaukee

Milwaukee M18 2806-20 Manual

20 August 2024
Milwaukee

Milwaukee 49-90-2344 Manual

7 August 2024
Milwaukee

Milwaukee M18 Fuel ONE KEY 2718-21 Manual

2 August 2024
Milwaukee

Milwaukee 49-90-2340 Manual

1 August 2024
Milwaukee

Milwaukee 48-22-9519 Manual

28 Juli 2024
Milwaukee

Milwaukee M18 Fuel One-Key 2916-22 Manual

26 Juli 2024

Hamer Manualer

Nyeste Hamer Manualer

Bavaria By Einhell

Bavaria By Einhell BBH 1500 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BBH 520 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BABH 24 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BBH 826 Manual

2 April 2025
Einhell

Einhell EMH 125 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-BH 1600 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-BH 620 4F Manual

29 Marts 2025
Stanley

Stanley Fatmax SFMCD715 Manual

29 Marts 2025
Stanley

Stanley Fatmax SFMCD711 Manual

29 Marts 2025
Makita

Makita HM1304 Manual

26 Marts 2025