Milwaukee M18 Rocket 2131-20 Manual

Milwaukee Lys M18 Rocket 2131-20

Læs gratis den danske manual til Milwaukee M18 Rocket 2131-20 (12 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Milwaukee M18 Rocket 2131-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Cat. No. / No de cat.

2131-20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

M18™ DUAL POWER TOWER LIGHT

TOUR D’ÉCLAIRAGE AVEC DEUX SOURCES D’ALIMENTATION

M18™

LÁMPARA DUAL TIPO TORRE M18™

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in electric

shock, re and/or serious injury. Save all warnings

and instructions for future reference.

WORK AREA SAFETY

• To reduce the risk of injury, close supervision is

necessary when an appliance is used near children.

• Store idle light out of reach of children. Warm

lights can become hazardous in the hands of children.

• Do not use outdoors.

ELECTRICAL SAFETY

• Power cord plugs must match the outlet.

Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

power tools. Unmodified plugs and match-

ing outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• To reduce the risk of electric shock, do not put light

in water or other liquid. Do not place or store appli-

ance where it can fall or be pulled into a tub or sink.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

• Arrange cords carefully to avoid hazardous

environments. Tripping or snagging on cords can

cause injury and product damage. Do not allow

cords to run through puddles or across wet ground.

• Do not unplug by pulling on the cord. To unplug,

grasp the plug, not the cord.

• Unplug the cord from outlet when not in use and

before servicing or cleaning.

• Always use a suitable extension cord to reduce

the risk of electric shock.

• If operating a light in a damp location is unavoid-

able, use a ground fault circuit interrupter (GFCI)

protected supply. Use of an GFCI reduces the risk

of electric shock.

PERSONAL SAFETY

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

light in unexpected situations.

• Do not use on a ladder or unstable support.

Stable footing on a solid surface enables better

control of the light in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use light only with specically designated bat-

tery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instructions.

Charging improperly or at temperatures outside

the specied range may damage the battery and

increase the risk of re.

SERVICE

• Have your light serviced by a qualied repair per-

son using only identical replacement parts. This

will ensure that the safety of the light is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES

• Warning - The lens may get hot during use. To

reduce the risk of burns, do not touch hot lens.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

SAVE THESE INSTRUCTIONS

EXTENSION CORDS

Grounded tools require a three wire extension

cord. Double insulated tools can use either a two

or three wire extension cord. As the distance from

the supply outlet increases, you must use a heavier

gauge extension cord. Using extension cords with

inadequately sized wire causes a serious drop in

voltage, resulting in loss of power and possible tool

damage. Refer to the table shown to determine the

required minimum wire size.

The smaller the gauge number of the wire, the greater

the capacity of the cord. For example, a 14 gauge

cord can carry a higher current than a 16 gauge cord.

When using more than one extension cord to make

up the total length, be sure each cord contains at

least the minimum wire size required. If you are using

one extension cord for more than one tool, add the

nameplate amperes and use the sum to determine

the required minimum wire size.

Guidelines for Using Extension Cords

• Be sure your extension cord is properly wired and in

good electrical condition. Always replace a damaged

extension cord or have it repaired by a qualied

person before using it.

• Protect your extension cords from sharp objects,

excessive heat and damp or wet areas.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Lys
Model:	M18 Rocket 2131-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Rocket 2131-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Milwaukee Manualer

Milwaukee M18 MDTL Manual

20 Juli 2025

Milwaukee M18 ALIS Manual

20 Juli 2025

Milwaukee M18 Rocket 2131-20 Manual

16 Juli 2025

Milwaukee M18 ONERSAL Manual

6 Juli 2025

Milwaukee M18 PAL Manual

6 Juli 2025

Milwaukee M18 SAL2 Manual

6 Juli 2025

Milwaukee M18 AL Manual

5 Juli 2025

Milwaukee M18 ONESLDP Manual

5 Juli 2025

Milwaukee M18 ONESLSP Manual

5 Juli 2025

Milwaukee M12 SAL Manual

5 Juli 2025

Lys Manualer

Nyeste Lys Manualer

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

BeamZ Cobra 100H Manual

3 Oktober 2025

BeamZ IGNITE 300 Manual

2 Oktober 2025

BeamZ BAC550Z Manual

2 Oktober 2025

BeamZ SB420IP Manual

2 Oktober 2025

BeamZ Mimas Laser Manual

2 Oktober 2025

BeamZ Phantom 2000 Manual

2 Oktober 2025