Milwaukee M28 0721-21 Manual

Milwaukee bore M28 0721-21

Læs gratis den danske manual til Milwaukee M28 0721-21 (13 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Milwaukee M28 0721-21, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/13
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
Cat. No.
No de cat.
0721-20
28 VOLT 1/2" RIGHT ANGLE DRILL
13 mm (1/2") POIGNÉE COUDEE ANGLE DROIT 28 V
TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON
EMPUNADURA EN "D" DE 28 V
2 3
PERSONAL SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury. Save all warnings and instructions for future reference. The term "power
tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the infl uence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools
that have the switch on invites accidents.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specifi ed by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fi re
when used with another battery pack.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: bore
Model: M28 0721-21

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M28 0721-21 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bore Milwaukee Manualer

Milwaukee

Milwaukee M18 FPD Manual

1 Oktober 2024
Milwaukee

Milwaukee 5376-20 Manual

30 September 2024
Milwaukee

Milwaukee 0756-22 Manual

20 September 2024
Milwaukee

Milwaukee PH 30 Power X Manual

12 September 2024
Milwaukee

Milwaukee 5426-21 Manual

11 September 2024
Milwaukee

Milwaukee M12 Fuel 3403-22 Manual

9 September 2024
Milwaukee

Milwaukee M18 FHACOD32 Manual

3 September 2024
Milwaukee

Milwaukee M18 ONEFHP Manual

3 September 2024
Milwaukee

Milwaukee M18 ONEFH Manual

3 September 2024
Milwaukee

Milwaukee M18 CHM Manual

3 September 2024

bore Manualer

Nyeste bore Manualer

Einhell

Einhell BM-G1100 E Manual

14 Oktober 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024
DeWalt

DeWalt DWD450 Manual

14 Oktober 2024
Rupes

Rupes BH 252R Manual

13 Oktober 2024
Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Einhell

Einhell TE-ID 750/1 E Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024