Milwaukee M28 0756-20 Manual

Milwaukee Hammer M28 0756-20

Læs gratis den danske manual til Milwaukee M28 0756-20 (17 sider) i kategorien Hammer. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Milwaukee M28 0756-20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/17
Cat. No.
No de cat.
0756-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
ROTARY HAMMER
MARTEAU ROTATIF
ROTOMARITILLOS
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.
2 3
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
WARNING
READ ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock, fi re and/or
serious injury. The term "power tool" in all of the warnings listed below refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES-FOR ALL BATTERY OPERATED TOOLS
1. Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
2. Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of fl ammable liquids, gases,
or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
4. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
5. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
6. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
7. Do not abuse the cord. Never use the
cord for carrying, pulling, or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges, or mov-
ing parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
9. Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the infl uence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result
in serious personal injury.
10. Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
11. Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in. Carrying tools with your fi nger on
the switch or plugging in power tools that
have the switch on invites accidents.
12. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
13. Do not overreach. Keep proper foot-
ing and balance at all times. This
enables better control of the power tool
in unexpected situations.
14. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery, or long
hair can be caught in moving parts.
15. If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of these de-
vices can reduce dust-related hazards.
POWER TOOL USE AND CARE
16. Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
17. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
18. Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk of
starting the tool accidentally.
19. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tools or
these instructions to operate power
tools. Power tools are dangerous in the
hands of untrained users.
20. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
21. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
22. Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
SERVICE
28. Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
23. Ensure the switch is in the off posi-
tion before inserting battery pack.
Inserting the battery pack into power
tools that have the switch on invites
accidents.
24. Recharge only with the charger speci-
fi ed by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fi re when used
with another battery pack.
25. Use power tools only with specifi cally
designated battery packs. Use of any
other battery packs may create a risk of
injury and fi re.
26. When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fi re.
27. Under abusive conditions, liquid may
be ejected from the battery, avoid
contact. If contact accidentally oc-
curs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
BATTERY TOOL USE AND CARE
Cat. No.
0756-20
Volts
DC
28
No Load
RPM
0 - 1400
No Load Blows
per Minute
0-4700
Specifi cations
Rotary Hammer (concrete)
Drill Only
Capacities
Steel Wood
1/2" 1-1/8"
Carbide Tipped
Percussion Bit
3/16" - 1"
Thin Wall
Core Bit
2-1/2"

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Hammer
Model: M28 0756-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M28 0756-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hammer Milwaukee Manualer

Milwaukee

Milwaukee M18 Fuel One-Key 2915-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2916-20 Manual

13 August 2025
Milwaukee

Milwaukee M28 0756-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 2912-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 3311-22 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 2908-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 2718-20 Manual

12 August 2025
Milwaukee

Milwaukee SDS 5263-21 Manual

12 August 2025
Milwaukee

Milwaukee SDS MAX 5546-21 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 2713-20 Manual

12 August 2025

Hammer Manualer

Nyeste Hammer Manualer

Makita

Makita DHR282 Manual

12 August 2025
Black Decker

Black Decker 5018 Manual

9 August 2025
Ozito

Ozito RHD-1600U Manual

9 August 2025
Ozito

Ozito RHD-6100U Manual

9 August 2025
DeWalt

DeWalt DCH966 Manual

9 August 2025
Ozito

Ozito RHD-900U Manual

9 August 2025
DeWalt

DeWalt D25872 Manual

8 August 2025
Fein

Fein ABH 18 Select Manual

7 August 2025
Bosch

Bosch GHT 130 Professional Manual

6 August 2025
Bosch

Bosch GBH 2-20 RE Professional Manual

6 August 2025