Minirig 3 Manual

Minirig Højttaler 3

Læs gratis den danske manual til Minirig 3 (13 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Minirig 3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

USER GUIDE MRBT 3

WARNING – LISTENING AT HIGH VOLUME FOR A LONG TIME MAY DAMAGE YOUR HEARING

• Never disassemble or attempt to modify the product in any way.

• Do not attempt to submerge the product in water or expose it moisture, water or liquids of any kind.

• Do not drop the product or place the product on its curved side in a location above ground where it may roll and fall.

• Do not cover or restrict ventilation and use only in areas of adequate ventilation with at least 15cm of separation.

• Avoid hot and/or humid environments such as bathrooms, conservatories, cars or in direct sunlight.

• Do not place or install the product near to sources of heat such as radiators or stoves.

• Do not expose the product directly to naked ﬂames, hot surfaces or other apparatus that produce heat.

• The safe operating temperature range of this product is +5°C to +40°C.

• Do not expose the product to objects or forces which may pierce or damage the enclosure.

• For charging, this product requires 0.5A (500mA) at 5V DC. Check USB port power supply speciﬁcations before use.

• CAUTION: AC-DC USB power supplies may carry electric shock hazard. Read power supply safety information before use.

• Do not short circuit or connect loads in excess of 1.5A (1500mA) to the power cable USB socket (marked “out”) while the cable is connected to the product.

• Do not daisy chain or connect multiple power cables to any single USB socket or USB power supply.

• Do not connect any other load or device to the power cable USB socket (marked “out”) while the power cable USB plug (marked “in”) is connected to a USB port power supply.

• Do not stress, bend, pinch or force cables in such a way as to incur damage.

• Do not store the product with a low/ﬂat battery or leave the unit unused for a long period of time.

• Do not leave the product permanently on charge.

• Do not use this product near medical devices or on an airplane.

• Refer all servicing and repair to original manufacturer. Servicing is required when the product is damaged in any way such as power-supply cord is damaged, liquid has been spilled or objects

have fallen onto the unit, the unit has been exposed to rain or moisture, does not operate normally or has been dropped.

The exclamation point within an equilateral triangle is intended to inform the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

SAFETY INSTRUCTIONS – PLEASE READ BEFORE USE

SAFETY INFORMATION

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcations or changes to this equipment. Such modiﬁcations or changes could void the user’s

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.