• This bathroom heater is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.(i.e. wall
switch)
• Ensure that the switch is in the o position
when changing the heat lamp (globe) or light
globe.
• Ensure that the waage of the centre
replacement light globe is the same as the
globe
supplied with the unit.
• E27 275W heat globes can be used in this unit.
• Ensure the grille is free of objects, dust build
up, etc. Make sure that the airflow through the
grille is not inhibited.
• Means for disconnection must be incorporated
in the xed wiring, in accordance with the
wiring rules.
• Precautions must be taken to avoid the back-
flow of gases into the room from the open flue
of gas or other fuel burning appliances.
• When cuing the ceiling material, care
must be taken to ensure you do not damage
electrical wiring and other hidden utilities.
• This bathroom heater is to be installed so that
switches or other controls can not be touched
by a person in the bath or shower.
• The lamps are extremely hot when in use. Do
not touch to the lamps with any part of your
body when in use. Allow all lamps cool down
suiciently before touching or replacement.
• The appliance shall, under no circumstances,
be covered with insulating material or similar
material.
• Ensure the bathroom heater is switched o
and cool down suiciently before cleaning.
• Remove globes when they are at room
temperature. Wipe with a damp cloth, never
immerse.
• Unclip lamp surround and wash in warm
soapy water. Always use a soft cloth, never
abrasives.
• Clean away any excess flu from the inside of
the body, motor blade brackets.
• The exhaust fan requires regular cleaning to
ensure optimum performance. With the power
o, regularly wipe the fan clear of dust and
dirt.
• Clean the exhaust ducting kit, ensuring there
are no obstructions at the exit.
Warning
If the power cord is damaged, the power cord
must be replaced by either the service agent or
similarly qualied persons in order to avoid a
hazard.
This product has not been designed for any uses
other than those specied in this booklet.
Save These Instructions
