Mitsubishi PEA-M180-250LAA Manual

Mitsubishi Klimaanlæg PEA-M180-250LAA

Læs gratis den danske manual til Mitsubishi PEA-M180-250LAA (20 sider) i kategorien Klimaanlæg. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Mitsubishi PEA-M180-250LAA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

INSTALLATION MANUAL

For safe and correct use, please read this installation manual thoroughly before installing the air-conditioner unit.

FOR INSTALLER

Packaged Air-Conditioners

INDOOR UNIT

PEA-M180,200,250LAA

VG79F103H02.book 1 ページ２０２２年１２月２０日　火曜日　午後２時７分

Contents

1. Safety precautions ........................................................................................... 2

2. Selecting the installation location..................................................................... 3

3. Selecting an installation site & Accessories ..................................................... 3

4. Fixing hanging bolts ......................................................................................... 5

5. Installing the unit.............................................................................................. 5

6. Refrigerant piping work .................................................................................... 6

7. Duct work ......................................................................................................... 8

8. Electrical work.................................................................................................. 9

9. Test run.......................................................................................................... 14

10. Maintenance .................................................................................................. 18

1. Safety precautions

Symbols used in the text

Warning:

Could lead to death, serious injury, etc.

Caution:

Could lead to serious injury in particular environments when operated

incorrectly.

• After reading this manual, be sure to keep it together with the instruction

manual in a handy place on the customer’s site.

Symbols put on the unit

Warning:

• Carefully read the labels affixed to the main unit.

• Do not install it by yourself (customer).

Incomplete installation could cause injury due to fire, electric shock, the unit

falling or leakage of water. Consult the dealer from whom you purchased the

unit or special installer.

• Servicing shall be performed only as recommended by the manufacturer.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Install the unit securely in a place which can bear the weight of the unit.

When installed in an insufficient strong place, the unit could fall causing injured.

• Use the specified wires to connect the indoor and outdoor units securely and

attach the wires firmly to the terminal board connecting sections so the

stress of the wires is not applied to the sections.

Incomplete connecting and fixing could cause fire.

• Do not use intermediate connection of the power cord or the extension cord

and do not connect many devices to one AC outlet.

It could cause a fire or an electric shock due to defective contact, defective

insulation, exceeding the permissible current, etc.

• Check that the refrigerant gas does not leak after installation has completed.

• Perform the installation securely referring to the installation manual.

Incomplete installation could cause a personal injury due to fire, electric

shock, the unit falling or leakage of water.

• This appliance is intended to be used by expert or trained users in shops, in

light industry and on farms, or for commercial use by lay persons.

• Perform electrical work according to the installation manual and be sure to

use an exclusive circuit.

If the capacity of the power circuit is insufficient or there is incomplete

electrical work, it could result in a fire or an electric shock.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

• Attach the electrical part cover to the indoor unit and the service panel to the

outdoor unit securely.

If the electrical part cover in the indoor unit and/or the service panel in the

outdoor unit are not attached securely, it could result in a fire or an electric

shock due to dust, water, etc.

• Be sure to use the part provided or specified parts for the installation work.

The use of defective parts could cause an injury or leakage of water due to a

fire, an electric shock, the unit falling, etc.

• Ventilate the room if refrigerant leaks during operation. If the refrigerant

comes in contact with a flame, poisonous gases will be released.

• Children should be supervised to ensure that they do not play with the appliance.

• When installing, relocating, or servicing the air conditioner, use only the

specified refrigerant written on the outdoor unit to charge the refrigerant

lines. Do not mix the refrigerant with any other refrigerant, and do not allow

air to remain in the lines.

- If air is mixed with the refrigerant, then it may cause abnormal high pressure in

the refrigerant lines, resulting in an explosion and other hazards.

- The use of any refrigerant other than that specified for the system will cause

mechanical failure, system malfunction, or unit breakdown. In the worst case,

this could lead to a serious impediment to securing product safety.

- It may also be in violation of applicable laws.

- MITSUBISHI ELECTRIC CORPORATION cannot be held responsible for

malfunctions or accidents resulting from the use of the wrong type of refrigerant.

• This indoor unit should be installed in a room which is equal to or larger than

the floor space specified in the outdoor unit installation manual. Refer to the

outdoor unit installation manual.

• Only use means recommended by the manufacturer to accelerate the

defrosting process or to clean.

• This indoor unit shall be stored in a room that has no continuously-operating

ignition device such as open flame, gas appliance, or electrical heater.

• Do not pierce a hole in or burn this indoor unit or refrigerant lines.

• Be aware that the refrigerant may be odour-free.

• Pipe-work shall be protected from physical damage.

• The installation of pipe-work shall be kept to a minimum.

• Compliance with national gas regulations shall be observed.

• Keep any required ventilation openings clear of obstruction.

• Do not use low temperature solder alloy when brazing the refrigerant pipes.

• When performing brazing work, be sure to ventilate the room sufficiently. Make

sure that there are no hazardous or flammable materials nearby. When

performing the work in a closed room, small room, or similar location, make

sure that there are no refrigerant leaks before performing the work. If refrigerant

leaks and accumulates, it may ignite or poisonous gases may be released.

Note:

The phrase “Wired remote controller” in this installation manual refers only to the PAR-41MAA. If you need any information for the other remote controller,

please refer to either the installation manual or initial setting manual which are included in these boxes.

 Before installing the unit, make sure you read all the “Safety precautions”.

 The “Safety precautions” provide very important points regarding safety. Make sure you follow them.

 Please report to or take consent by the supply authority before connection to the system.

MEANINGS OF SYMBOLS ON THE UNIT

WARNING

(Risk of fire)

This symbol is only for R32 refrigerant. The type of the refrigerant used is written on the nameplate on the outdoor unit.

R32 refrigerant is flammable. If the refrigerant leaks, or comes in contact with fire or parts that generate heat, it may create harmful gas and

pose a risk of fire.

Read the OPERATION MANUAL carefully before operation.

Service personnel are required to carefully read the OPERATION MANUAL and INSTALLATION MANUAL before operation.