Mooer Blues Crab Manual

Mooer Ikke kategoriseret Blues Crab

Læs gratis den danske manual til Mooer Blues Crab (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Mooer Blues Crab, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Precautions

PLEASE READ CAREFULLY BEFORE PROCEEDING

Interference with other electrical devices and Cleaning

Radios and televisions placed nearby may experience reception interference.

Operate this unit at a suitable distance from radios and televisions.

Clean only with a soft, dry cloth.

Power Supply

Please connect the designated AC adapter to an AC outlet of the correct voltage.

Please be sure to use only an AC adapter which supplies 9V DC, ,center

negative. Unplug the AC power adapter when not in use or during electrical storms.

Handling

Do not apply excessive force to the switches or controls.

Do not let paper, metal, or other objects into this unit.

Take care not to drop the unit, and do not subject it to shock or excessive pressure.

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference

that may cause undesired operation.

Connections

Always turn off the power and all other equipment before connecting or

disconnecting. This will help prevent malfunction and damage to any of the devices.

Make sure to unplug all connection cables and power cords before moving this unit.

To avoid deformation, discoloration, or other serious damage,

do not expose this unit to the following conditions:

Direct sunlight

Magnetic fields

Excessively dusty or dirty location

Strong vibration or shock

Extreme temperature or humidity

High humidity or moisture

Heat sources

MICRO PREAMP

Connections

*Notes Any specification’s update will not be amended in this manual.：

Overview

These micro preamps are sonically accurate digital recreations of the preamp

sections of popular tube amps. We have developed these by directly analyzing

real tube amplifiers using a brand new technology to capture their sound,

dynamics and response. Please ensure to use a clean 9v power supply and a high

quality power amp to get the best results. Each Micro Preamp comes complete

with dual channels, integrated speaker cabinet simulation and dual operating

modes to suit the needs of all users.

Pedal layout

2.Input

Connect instrument

3.Output

Connect to power amp or effects return

4.TRE, MID, BASS

Standard tone stack. When all 3 of these

controls are at 12 o'clock the preamp is

closest to the original amplifier we

analyzed. Clockwise will boost

frequencies and counterclockwise will

cut them. The frequencies which the EQ

controls adjust, vary depending on the

preamp model.

5.GAIN

Adjusts the input gain

6.VOL

Adjusts the output volume of the

micro preamp

DC 9V

CH/CAB

01 1. DCIN

Connect a DC 9V 220mA centre pin

negative power supply

8.FOOTSWITCH

The footswitch has 2 modes of operation

1.Toggles the preamp on/off

2.Switch between channel A/B (The micro preamp will be permanently on in mode 2)

7.LED BUTTON

Press once to switch between channel A/B (Blue/Red)

Press and hold for 2 seconds to switch Cab simulation on/off

When Cab simulation is active the LED BUTTON will flash

To change footswitch mode, press and hold the footswitch for two seconds.

The LED BUTTON will flash twice to confirm the mode has changed.

Note: All EQ, gain and volume settings will be automatically stored separately for

each channel.

1.DCIN

Connect a DC 9V 220mA centre pin negative power supply

2.INPUT

Connect your instrument directly or the output of your pre, pre-amp effects like

Overdrive, distortion, etc.

3.OUTPUT

Connect to a power amp or your amplifier’s effects return.

(Highly recommend using a tube amplifier)

Different power amplifiers will affect the outcome of the final tone.

You can also connect directly to a sound card and activate the speaker cab

simulation for recording purposes

Note: You can connect your "fx loop" effects, like modulation and time based

effects, in between the MOOER preamps output and the input of the power amp

(fx return)

Input：（）1/4” mono audio jack. Impedance: 1 meg Ohms

Output：（）1/4” mono audio jack Impedance: 100 Ohms

Power requirements: AC adapter 9V DC , center negative.

Current Draw:300mA

Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)

Weight:160g

Accessories:Owner’s Manual

MICRO

PREAMP

CH/CA B

OD/Dist

Delay

Reverb

AMP

effects return

Part No:620010622

DC 9V

CH/CA B

Produkt Specifikationer

Mærke:	Mooer
Kategori:	Ikke kategoriseret
Model:	Blues Crab

Har du brug for hjælp?

Hvis du har brug for hjælp til Mooer Blues Crab stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Mooer Manualer

Mooer GE200 Pro Li Manual

28 August 2025

Mooer Ocean Machine II Manual

12 August 2025

Mooer GS1000 Li Manual

15 Juli 2025

Mooer Groove Loop GL100 Manual

8 Januar 2025

Mooer GE250 Manual

15 December 2024

Mooer GE100 Manual

17 November 2024

Mooer Tube Engine Manual

2 September 2024

Mooer PRIME S1 Manual

1 September 2024

Mooer MICRO DI Manual

21 August 2024

Mooer Echolizer Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025