Connecting Basic tips Customising
INSTALLATION
Connect the supplied cable to the USB micro
connector under the product, and connect the
other end to a USB port on the computer. Once
installed, your Delta and its buttons will operate
as shown in gure 2.
CHANGING FROM MAC TO PC
CONFIGURATION
The product is congured for PC on delivery. To
congure it for Mac, simultaneously depress the
lower right button, the lower left button (Copy
and Paste) and the Control Bar for 3–4 seconds.
The LED will ash to conrm the conguration.
Repeat the procedure to change back to PC
conguration.
POSITIONING
Position your Delta between you and your
keyboard. The B key on your keyboard should be
directly in front to the scoll wheel on the Delta,
as shown in gure 1. If you have a thin keyboard,
attach and use the keyboard raisers that comes
in the package with your Delta. Connect them
to your Delta by sliding them into the slots
under the unit. The keyboard should always be
in line with or slightly lower than your Delta.
SCROLLING
There are two ways of scrolling. You can use
the separate scroll wheel or activate auto scroll
on the Control Bar. To activate auto scroll, click
on the scroll wheel and use the Control Bar to
scroll, then deactivate auto scroll by clicking on
the scroll wheel again.
REPLACEMENT OF PAD
The pad can be replaced when it is worn out.
You can order new pads via your dealer or
directly from mousetrapper.com
MT KEYS
To customise the button functions, go to
mtkeys.mousetrapper.com (using Chrome or
Edge) and follow the intructions. Your Delta
has to be connected to your computer. You can
for example choose between functions such
as close window, lock computer, create your
own shortcuts and much more. When you have
changed the settings they will be stored in the
Delta and it will work the same way when you
connect it to a new computer.
Paste
Click/Select
Right ClickScroll
1
ENGLISH
Zoom out
Copy
Click/Select
Zoom in
2