CONGRATULATIONS ON YOUR PURCHASE
You have selected an exceptional phono preamplifier. Each component used in
the construction of the pa2.2 was selected to provide you with superior
performance and the highest level of sound reproduction available today. We
know of no phono preamplifier that costs as much to produce yet sells for so little.
The precise and elegant design of this phono preamplifier makes it easy to install
and operate. Please take a few moments to read over the operating instructions
to ensure that you get the best performance from your preamplifier and years of
trouble-free service.
SAFETY GUIDELINES
This product is designed and manufactured to strict quality and safety standards.
However, you should be aware of the following installation and operation
precautions:
1. Take heed of warnings and instructions
Read all the instructions before connecting or operating the preamplifier.
Keep this manual so you can refer to these safety instructions.
2. Water and Moisture
To reduce the risk of fire or electric shock, do not expose the phono preamplifier
to moisture or water. If the phono preamplifier is exposed to moisture,
immediately disconnect the power cord from the wall. Take the preamplifier to an
authorized music hall service center for inspection. Do not touch the phono
preamplifier, power cord, or plug with wet hands.
3. Object or liquid entry
Do not allow foreign objects or liquids into the unit. If this happens, immediately
disconnect the power cord from the wall and take the unit to an authorized music
hall service center for inspection.
4. Heat
Keep the phono preamplifier away from naked flames, radiators, heat registers,
stoves, or any other heat-producing appliances (including amplifiers).
5. Climate
The phono preamplifier has been designed for use in moderate climates. Do not
attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95
degrees Fahrenheit (35 degrees Celsius).
6. Racks and Stands
Place the phono preamplifier on a fixed, level surface strong enough to support
its weight. Do not place it on a moveable cart that could tip over. We
recommend only using stands approved for use with audio equipment.
