MXR M195 Noise Clamp Manual

MXR Ikke kategoriseret M195 Noise Clamp

Læs gratis den danske manual til MXR M195 Noise Clamp (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 9 anmeldelser. Har du et spørgsmål om MXR M195 Noise Clamp, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
92503010856 REVA
M195 NOISE CLAMP
**LOOP BYPASS OPTION
**LOOP BYPASS OPTION
Internal switch toggles between two bypass modes: Loop Bypass or Loop
On. When in Loop Bypass mode, the Send/Return effects loop is bypassed
when the pedal is off. In Loop On mode, the Send/Return effects loop is
active while the pedal is off. This can be accessed by removing the back
Up - Loop On (factory setting)
Down - Loop Bypass
M195 NOISE CLAMP
DESCRIPTION
• Eliminates hiss and excess noise
from your effects chain
• A single Trigger knob sets the
volume threshold
• Capable of reducing noise up
to 26 dB
• Maintains riff denition at extreme
gain levels
POWER
The MXR Noise Clamp can be
powered by one 9 volt battery
(accessed by removing the bottom
plate of the pedal), a Dunlop
ECB003 AC adapter (ECB003E in
Europe) or a Dunlop DCB10 DC
Brick power supply.
CONTROLS
TRIGGER knob sets volume
threshold for when the Clamp
is active
SEND Front of FX loop
OUTPUT Goes to amp
RETURN End of effects loop
INPUT To guitar
FOOTSWITCH toggles effect
on/bypass
DIRECTIONS
• Run a cable from your guitar to
your Noise Clamp’s Input jack
and run another cable from the
Noise Clamp’s output jack to
your amplier.
• Run a cable from the Noise
Clamp’s Send jack to the input
of the rst pedal in your effects
chain. Run another cable from the
Noise Clamp’s Return jack to the
output jack of the last pedal in
your effects chain.
• Turn the effect on by depressing
the footswitch.
SPECIFICATIONS
IMPEDANCE
Input, Return 1 MΩ
Output, Send 1 kΩ
Max Level 10 dBV
Gate Attenuation -26 dBV
Signal to Noise 99.5 dBA
THD* 0.01%
Attack Time 3 ms
Release Time 10 ms
Bypass Buffered
Current Draw 13 mA
Power Supply DC 9 volts
0 dBV = 1 Vrms
* Measured at 1 kHz, -10 dBV
• The volume threshold is the
minimum level required to turn off
the noise clamp.
• Rotating the Trigger knob
clockwise raises the Noise
Clamp’s volume threshold for
hard clamping, while rotating
it counterclockwise lowers its
volume threshold to let through
quieter notes.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658

Produkt Specifikationer

Mærke: MXR
Kategori: Ikke kategoriseret
Model: M195 Noise Clamp

Har du brug for hjælp?

Hvis du har brug for hjælp til MXR M195 Noise Clamp stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret MXR Manualer

MXR

MXR Rockman X100 Manual

30 Juli 2025
MXR

MXR EVH Phase 90 Manual

30 Juli 2025
MXR

MXR Iso-Brick M238 Manual

24 August 2024
MXR

MXR M-103 Manual

22 August 2024
MXR

MXR Dyna Comp M282 Manual

22 August 2024
MXR

MXR Smart Gate M-135 Manual

22 August 2024
MXR

MXR MC-404 CAE WAH Manual

22 August 2024
MXR

MXR Dime Distortion DD-11 Manual

22 August 2024
MXR

MXR M195 Noise Clamp Manual

22 August 2024
MXR

MXR Mini Iso-Brick M239 Manual

13 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AXESS

AXESS AXABH-FD1 Manual

30 Juli 2025
Yealink

Yealink SIP-T23P Manual

30 Juli 2025
Tripp Lite

Tripp Lite TLM606NC Manual

30 Juli 2025
Yealink

Yealink MeetingBoard 65 Manual

30 Juli 2025
Festo

Festo EMME-AS-80-M-HS-AMXB Manual

30 Juli 2025
Rothenberger

Rothenberger ROGROOVER 1-12 Manual

30 Juli 2025
Advantech

Advantech WISE-750 Manual

30 Juli 2025
Heylo

Heylo StaubStop 3000 Manual

30 Juli 2025
Advantech

Advantech ARES-5222A Manual

30 Juli 2025
Tripp Lite

Tripp Lite SRGP1KO Manual

30 Juli 2025