NAD M12 Manual

NAD Hi-Fi system M12

Læs gratis den danske manual til NAD M12 (22 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 31 anmeldelser. Har du et spørgsmål om NAD M12, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Owner’s Manual

M12

Digital Preamp DAC

1. Read instructions - All the safety and operating instructions should

be read before the product is operated.

2. Retain instructions - The safety and operating instructions should be

retained for future reference.

3. Heed Warnings - All warnings on the product and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be

followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6. Attachments - Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water-for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

8. Accessories - Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury

to a child or adult and serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow

the manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

9. Cart - A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven surfaces

may cause the product and cart combination to overturn.

10. Ventilation - Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product and to protect it

from overheating. These openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been adhered to.

11. Power Sources - This product should be operated only from the type

of power source indicated on the marking label and connected to

a MAINS socket outlet with a protective earthing connection. If you

are not sure of the type of power supply to your home, consult your

product dealer or local power company.

12. Power-Cord Protection - Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

product.

13. Mains Plug - Where the mains plug or an appliance coupler is used

as the disconnect device, the disconnect device shall remain readily

operable.

14. Outdoor Antenna Grounding - If an outside antenna or cable system

is connected to the product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges

and built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper grounding

of the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section 820-40

of the NEC which provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding system of the building, as

close to the point of cable entry as practical.

15. Lightning - For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the product due to lightning

and power-line surges.

16. Power Lines - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be

fatal.

17. Overloading - Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of re or

electric shock.

18. Flame Sources - No naked ame sources, such as lighted candles,

should be placed on the product.

19. Object and Liquid Entry - Never push objects of any kind into this

product through openings as they may touch dangerous voltage

points or short-out parts that could result in a re or electric shock.

Never spill liquid of any kind on the product.

20. Headphones - Excessive sound pressure form earphones and

headphones can cause hearing loss.

21. Damage Requiring Service - Unplug this product from the wall

outlet and refer servicing to qualied service personnel under the

following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are covered

by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive

work by a qualied technician to restore the product to its normal

operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance-this

indicates a need for service.

22. Replacement Parts - When replacement parts are required, be sure

the service technician has used replacement parts specied by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in re, electric shock, or other

hazards.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Produkt Specifikationer

Mærke:	NAD
Kategori:	Hi-Fi system
Model:	M12
Bredde:	435 mm
Dybde:	383 mm
Højde:	133 mm
Vægt:	8100 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Strømforbrug (standby):	0.5 W
Strømforbrug (typisk):	26 W
Frekvensområde:	20 - 22000 Hz
klirfaktor (THD):	0.0005 %
Signal/støjforhold:	-125 dB
Indgangsimpedans:	110 ohm (Ω)
Prøvetagningshastighed:	32 - 192 kHz