Navman Smart Box II Manual

Navman dashcam Smart Box II

Læs gratis den danske manual til Navman Smart Box II (2 sider) i kategorien dashcam. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Navman Smart Box II, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
User Manual
Smart Box II
Revision: R00
(8/2016)
Trademarks
All brand and product names are trademarks or registered trademarks of their respective companies.
Disclaimer
Specifications and documents are subject to change without notice. Navman does not warrant this document
discrepancies between the device and the documents.
Notes
Not all models are available in all regions.
Depending upon the specific model purchased, the colour and look of your device and accessories may not exactly
match the graphics shown in this document.
Regulatory information
For regulatory identification purposes, this product is assigned a model number of N467. Marking labels located on
the exterior of your device indicate the regulations that your model complies with. Please check the marking labels
on your device and refer to the corresponding statements in this section. Some notices apply to specific models
only. The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such
as petrol stations, chemical storage depots and blasting operations.
WEEE
This product must not be disposed of as normal household waste, in
accordance with the EU directive for waste electrical and electronic
equipment (WEEE – 2012/19/EU). Instead, it should be disposed of
by returning it to the point of sale, or to a municipal recycling collection
point.
5 6 1 5 N 4 6 7 0 0 5 1 R 0 0
Introduction
Navman Smart Box II provides power to your Navman dash cam by connecting with the constant power of the fuse
terminal of your vehicle. It is very useful when you want to record video footage whilst parking. Smart Box II can
prevent the discharge of the vehicle battery by blocking the electric power automatically as it checks the preset
time and voltage.
Parts and functions
1
Fuse cable
- ACC (red wire)
- B+ (yellow wire)
- GND (black wire)
2
Main unit of Smart Box II
- Time and voltage setting switches
- LED indicator
3
Mini-USB connector
Connects to the recorder.
Time and voltage setting switches
Switch 1 and 2: Voltage setting switches
Switch 3 and 4: Time setting switches
1 ON / 2 ON
11.8V
23.6V
Passenger car/RV:
Truck/bus:
1 OFF / 2 ON
12.0V
24.0V
1 ON / 2 OFF
12.2V
24.4V
1 OFF / 2 OFF
11.6V
23.2V
3 ON / 4 ON
12 hours
3 OFF / 4 ON
24 hours
3 ON / 4 OFF
36 hours
3 OFF / 4 OFF
power off
Precautions and notices
Rated input voltage: DC 12 - 24V, output current: 2A maximum
WARNING! Do not use other than rated output voltage status. This product can only be used with the vehicles that
have DC 12 - 24V voltage. (Passenger car and RV: 12V; truck and bus: 24V)
Follow the installation instructions or ask a specialist technician for assistance.
There may be deviations in vehicle power voltages about vehicle battery status and usage environments.
Make sure to turn off to the dash cam if the vehicle will not be used for 2 days or more.
Never attempt to disassemble, repair or make any modifications to the product. Disassembling, modifying or
any attempt to repair could cause damage to your device, may inflict bodily harm or damage to property and
will void any warranty.
You must use the product as intended. Misuses, neglect, accident or abuse will not cover the warranty,
replacement or refund.
Do not drop the product or subject it to severe shock.
When installing, mounting and storing, please do so in a dry place.
Please check the installation and operation of the product regularly.
The manufacturer is not responsible for any damages caused by not observing the above warnings and
precautions.
Installation and setup
1. Locate and open the fuse box inside of the vehicle.
Please note that the installation illustrations are for your reference only. The placement of the fuse box may
vary depending on the vehicle model. If you encounter any problems during installation, it is recommended
that you contact a skilled installer (e.g. the service personnel of the vehicle) for assistance.
2. Check and confirm the vehicle's voltage by using the electricity tester as battery voltages varies by vehicle.
You must confirm your vehicle's voltage.
Use the electricity tester to locate the fuse from which the power is supplied even when the vehicle is turned
off, such as the emergency flashing hazard lights, interior and door lights etc. Connect the yellow wire (B+) to
the fuse.
Use the electricity tester to locate the fuse from which the power is not supplied when the vehicle is turned off,
such as the indicator lights. Connect the red wire (ACC) to the fuse.
The black wire (GND) must be connected to the metal part of the vehicle for grounding. If not grounded, this
product may not work properly. You can use a screw to attach the black wire to the vehicle (try to find a screw
hole on any metal part).
Connect the Smart Box II to the dash cam and confirm it is working properly by the LED indicator that glows in
red. Then you can arrange the cable and complete the installation.
The length of the provided cable is about 4.5 metres. You can route the cable through the top ceiling and the
A-pillar so that it does not interfere with driving. Make sure that the cable installation does not interfere with
the vehicle airbags or other safety features.
3. Set up the voltage and time by adjusting the switches.
Setting up the voltage: If the voltage of vehicle battery falls lower than the preset voltage value, the power
to the dash cam will be disconnected automatically.
Setting up the time: If the time passes the preset time (by checking the time after vehicle ignition is turned
off), the power to the dash cam will be disconnected automatically.

Produkt Specifikationer

Mærke: Navman
Kategori: dashcam
Model: Smart Box II

Har du brug for hjælp?

Hvis du har brug for hjælp til Navman Smart Box II stil et spørgsmål nedenfor, og andre brugere vil svare dig


dashcam Navman Manualer

Navman

Navman DDR MiVue 740 Manual

14 Januar 2025
Navman

Navman Smart Box II Manual

14 Januar 2025
Navman

Navman MiVue 750 Manual

1 September 2024
Navman

Navman MiVue WORKMATE XDC Manual

20 August 2024
Navman

Navman MiVue ALTA Manual

20 August 2024
Navman

Navman MiVue ALTA DC Manual

19 August 2024
Navman

Navman FOCUS450 Dual Manual

13 August 2024
Navman

Navman MiVue 755 Manual

9 Juli 2024

dashcam Manualer

Nyeste dashcam Manualer

Mio

Mio MiVue J20 Manual

21 Februar 2025
BlackVue

BlackVue CM100GLTE Manual

19 Februar 2025
Kogan

Kogan KAACCHWKITA Manual

11 Februar 2025
Hikvision

Hikvision AE-DC5313-C6 Manual

7 Februar 2025
Thinkware

Thinkware X1000 Manual

2 Februar 2025
Rexing

Rexing V33 Manual

13 Januar 2025
Alpine

Alpine PKG-RSE3DVD Manual

12 Januar 2025
Cobra

Cobra SC 250R Manual

11 Januar 2025
Cobra

Cobra SC 220C Manual

11 Januar 2025
IRoad

IRoad X10 Pro Manual

7 Januar 2025