NEC ST-EX2023 Manual

NEC Vægophæng ST-EX2023

Læs gratis den danske manual til NEC ST-EX2023 (2 sider) i kategorien Vægophæng. Denne vejledning er vurderet som hjælpsom af 87 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 44 anmeldelser. Har du et spørgsmål om NEC ST-EX2023, eller vil du spørge andre brugere om produktet?

Side 1/2

ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /

Istruzioni di installazione / 取扱説明書 / 安装说明书

English

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Français

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Deutsch

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Español

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Italiano

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

日本語

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

简体中文

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

1234

AB

English

1

2 3

Français Deutsch

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unit: mm

Weight: ??

Weight: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unité: mm

Poids: ??

Poids: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Einheit: mm

Gewicht: ??

Gewicht: ??

Produkt Specifikationer

Mærke:	NEC
Kategori:	Vægophæng
Model:	ST-EX2023

Har du brug for hjælp?

Hvis du har brug for hjælp til NEC ST-EX2023 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægophæng NEC Manualer

NEC 40000678 Manual

1 Maj 2024

NEC 40000676 Manual

24 Marts 2024

NEC PD01CMB Manual

18 Marts 2024

NEC 40000672 Manual

9 Februar 2024

NEC PD01CMS Manual

4 Februar 2024

NEC ST-4020 Manual

30 December 2023

NEC ST-4620 Manual

16 November 2023

NEC 40000679 Manual

7 August 2023

NEC WM-46UN-P Manual

21 December 2022

NEC WS32-55P Manual

4 December 2022

Vægophæng Manualer

Nyeste Vægophæng Manualer

Chief ODMB1X1 Manual

20 December 2025

Chief LF49UBP-B2B Manual

19 December 2025

Chief TILD1X2IER-M Manual

18 December 2025

Chief LF55UBP-B2B Manual

18 December 2025

Chief ODMPB1 Manual

18 December 2025

Chief LF55UBP Manual

18 December 2025

Chief MFQ6000B Manual

18 December 2025

Chief DVM0500U3 Manual

17 December 2025

Chief RMF2 Manual

17 December 2025

Chief TILD1X3IER-R Manual

17 December 2025