Necchi N 424 Manual

Necchi Symaskine N 424

Læs gratis den danske manual til Necchi N 424 (122 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Necchi N 424, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/122

INSTRUCTION MANUAL

Type A420

Type B

422

Type C

424

INSTRUCTION MANUAL

This sewing machine is intended for household use.

IMPORTANT SAFETY INSTRUCTIONS

When using a sewing machine, basic safety precautions should always be followed,

including the following.

Read all instructions before using.

DANGER - To reduce the risk of electric shock:

Never leave unattended when plugged in. Always unplug this machine from the electric

outlet immediately after using and before cleaning.

WARNING-

To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Do not allow to be used as a toy. Close attention is necessary when this sewing machine

is used by or near children.

2.Use this sewing machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

3.Never operate this sewing machine if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the sewing

machine to the nearest authorized dealer or service center for examination, repair,

electrical or mechanical adjustment.

4.Never operate the sewing machine with any air openings blocked. Keep ventilation

openings of the sewing machine and foot controller free from the accumulation of lint,

dust, and loose cloth.

5.Never drop or insert any object into any opening.

6.Do not use out doors.

7.Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8.To disconnect, turn the power switch to the off position (symbol O), then remove plug

from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the sewing

machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14.Switch the sewing machine off (symbol O) when making any adjustments in the needle

area, such as threading needle, changing needle, threading bobbin, or changing presser

foot.

15.Always unplug sewing machine from the electrical outlet when removing covers,

lubricating, or when making any other user servicing adjustments mentioned in the

instruction manual.

16.Handle the foot controller with care and avoid dropping it on the floor. Be sure not to

place anything on top of it.

17.Use only the handle to lift and move the machine.

18.Do not expose the machine or machine plastic case to sunlight directly. Also, do not

keep it in a very warm or damp place.

SAVE THESE INSTRUCTIONS

Servcing should be performed by an authorized service representative.

Produkt Specifikationer

Mærke:	Necchi
Kategori:	Symaskine
Model:	N 424

Har du brug for hjælp?

Hvis du har brug for hjælp til Necchi N 424 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Necchi Manualer

Necchi NC-103D Manual

27 September 2025

27 September 2025

27 September 2025

27 September 2025

27 September 2025

Necchi NC-204D Manual

27 September 2025

Necchi C360 Manual

27 September 2025

Necchi C2000 Manual

10 September 2025

Necchi Maximatic 586 Manual

12 Januar 2025

Necchi K432A Manual

22 August 2024

Symaskine Manualer

Nyeste Symaskine Manualer

Alfa Compakt 500E Plus Manual

27 September 2025

Alfa Practik 5 Manual

26 September 2025

Alfa Practik 7 Manual

26 September 2025

26 September 2025

26 September 2025

26 September 2025

26 September 2025

Union Special BC111TA12-1M Manual

24 September 2025

Union Special 81200EZ3254 Manual

24 September 2025

Union Special BML111C1 Manual

24 September 2025