Nedis TVRC20SNBK Manual

Nedis Fjernbetjening TVRC20SNBK

Læs gratis den danske manual til Nedis TVRC20SNBK (68 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Nedis TVRC20SNBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/68

T V SAT

VOL-

VOL+

P-

LEARN

7 8 9

4 5 6

123



0

TVRC20SNBK

Remote control

Description English

1. On/o button • Press the button to switch the TV on or o.

2. TV button • Press this button to control the TV.

3. Satellite button • Press this button to control the set-top-box or

other programmed devices.

4. Previous program button • Press the buttons to navigate through the

programs.

5. Next program button

6. Volume - button • Press the button to increase or decrease the

volume.

7. Volume + button

8. OK button • Press the button to conrm a selection.

9. Mute button • Press the button to mute the sound..

10. Learn button

• In learn mode, press the button to activate the

signal before copying functions from other

remote controls.

11. Digit buttons • Press the buttons to select the channel.

12. LED indicator • The LED indicator shows the status of the device.

Use

Programming the remote control to the TV or another device

1. Switch on the device to be programmed.

2. Look for the brand of the TV that you want to program in the code list. Make a note of the rst code in the list.

3. Press and hold the TV or satellite button of the remote control until the LED indicator comes on.

4. Enter the previously identied code.

Note: If the LED indicator goes o, it indicates that the code is accepted. If it switches on or o the TV, it indicates that the code is

correct. If it does not switch on or o the TV, repeat from step 2 to try another code.

Auto search

1. Switch on the device to be programmed.

2. Press and hold the tv or satellite button until the led indicator comes on

3. Point the remote control to the device. Press and slowly release the on/o button.

Note: If the device is switched o, it indicates that the code is found.

Specifications:

• Batteries:

2x AAA / LR03 (not incl.)

4. Immediately press the TV and satellite buttons simultaneously to conrm the code.

5. Switch on the device again and check if the other buttons of the remote control function correctly.

Note: For buttons that do not function correctly, repeat the procedure until the correct code is found.

Copying functions from other remote controls

1. Press the TV or satellite button.

2. Press and hold the learn button until the LED indicator ashes rapidly.

3. Place the Nedis remote control within 2 cm from the other remote control.

4. On the Nedis remote control, press the button that you want to program until the LED indicator stays on.

5. Press and hold the button on the other remote control until the LED indicator ashes twice.

6. Repeat the procedure from step 4 to copy the functions for all buttons.

7. Press the learn button to save the settings and exit the programming mode.

Technical data

Battery type AAA / LR03 (2x)

Battery life ± 2 years

Transmission range 8 m

Frequency < 108 MHz

Operating temperature 0 °C ~ 40 °C

Relative humidity 10% ~ 80% (non-condensing)

Dimensions 17 x 5.5 x 2 cm

Safety

• To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.

• Disconnect the product from the mains and other equipment if a problem should occur.

• Read the manual carefully before use. Keep the manual for future reference.

• Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.

• Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Battery safety

• Use only the batteries mentioned in the manual.

• Do not use old and new batteries together.

• Do not use batteries of dierent types or brands.

• Do not install batteries in reverse polarity.

• Do not short-circuit or disassemble the batteries.

• Do not expose the batteries to water.

• Do not expose the batteries to re or excessive heat.

• Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product

unattended for longer periods of time.

• If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.

Cleaning and maintenance

Warning!

• Do not use cleaning solvents or abrasives.

• Do not clean the inside of the device.

• Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.

• Clean the outside of the device using a soft, damp cloth.

Beschrijving Nederlands

1. Aan/uit-knop • Druk op de knop om de TV in of uit te schakelen.

2. TV-knop • Druk op deze knop om de TV te bedienen.

3. Satellietknop • Druk op deze knop om de settopbox of andere

geprogrammeerde apparaten te bedienen.

4. Vorig programma-knop • Druk op de knoppen om de programma's te

doorlopen.

5. Volgend programma-knop

Produkt Specifikationer

Mærke:	Nedis
Kategori:	Fjernbetjening
Model:	TVRC20SNBK

Har du brug for hjælp?

Hvis du har brug for hjælp til Nedis TVRC20SNBK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Nedis Manualer

Nedis TVRC23SNBK Manual

12 August 2025

Nedis WIFIRC10CBK Manual

8 September 2024

Nedis TVRC2310BK Manual

29 August 2024

Nedis TVRC45PHBK Manual

29 August 2024

Nedis TVRC45LGBK Manual

29 August 2024

Nedis TVRC45PASHBK Manual

29 August 2024

Nedis TVRC45SOBK Manual

29 August 2024

Nedis TVRC45HIBK Manual

29 August 2024

Nedis TVRC45SABK Manual

29 August 2024

Nedis TVRC2340BK Manual

29 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Insignia NS-RMT8D21 Manual

29 September 2025

ProMaster PRO5439 Manual

29 September 2025

Insignia NS-RMTVIZ21 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025

Neets 310-0350 Manual

29 September 2025

Nikon MC-DC3 Manual

28 September 2025

Neets 310-0202 Manual

27 September 2025