Nedis TVRC21SNBK Manual

Nedis Fjernbetjening TVRC21SNBK

Læs gratis den danske manual til Nedis TVRC21SNBK (53 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Nedis TVRC21SNBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/53

T V SAT

VOL-

VOL+

P-

LEARN

7 8 9

4 5 6

1 2 3



0

TVRC21SNBK

Remote control

Description English

1. On/o button Press the button to switch

the TV on or o.

2. TV button Press this button to control

the TV.

3. Satellite button

Press this button to control

the set-top-box or other

programmed devices.

4. Previous program

button

Press the buttons to

navigate through the

programs.

5. Next program button

6. Volume - button Press the button to increase

or decrease the volume.

7. Volume + button

8. OK button Press the button to conrm

a selection.

9. Mute button Press the button to mute

the sound..

10. Learn button

In learn mode, press the

button to activate the

signal before copying

functions from other

remote controls.

11. Digit buttons Press the buttons to select

the channel.

12. LED indicator The LED indicator shows

the status of the device.

Use

Programming the remote control to the TV or another

device

1. Switch on the device to be programmed.

2. Look for the brand of the TV that you want to program

in the code list. Make a note of the rst code in the list.

3. Press and hold the TV or satellite button of the remote

control until the LED indicator comes on.

4. Enter the previously identied code.

Note: If the LED indicator goes o, it indicates that

the code is accepted. If it switches on or o the TV, it

indicates that the code is correct. If it does not switch on

or o the TV, repeat from step 2 to try another code.

Auto search

1. Switch on the device to be programmed.

Specifications:

• Batteries:

2x AAA / LR03

(not incl.)

2. Press and hold the tv or satellite button until the led

indicator comes on

3. Point the remote control to the device. Press and slowly

release the on/o button.

Note: If the device is switched o, it indicates that the

code is found.

4. Immediately press the TV or satellite buttons to conrm

the code.

5. Switch on the device again and check if the other

buttons of the remote control function correctly.

Note: For buttons that do not function correctly, repeat

the procedure until the correct code is found.

Copying functions from other remote controls

1. Press the TV or satellite button.

2. Press and hold the learn button until the LED indicator

ashes rapidly.

3. Place the Nedis remote control within 2 cm from the

other remote control.

4. On the Nedis remote control, press the button that you

want to program until the LED indicator stays on.

5. Press and hold the button on the other remote control

until the LED indicator ashes twice.

6. Repeat the procedure from step 4 to copy the functions

for all buttons.

7. Press the learn button to save the settings and exit the

programming mode.

Technical data

Battery type AAA / LR03 (2x)

Battery life ± 2 years

Transmission range 8 m

Frequency < 108 MHz

Operating temperature 0 °C ~ 40 °C

Relative humidity 10% ~ 80% (non-

condensing)

Dimensions 17 x 5.5 x 2 cm

Safety

• To reduce risk of electric shock, this product should

only be opened by an authorized technician when

service is required.

• Disconnect the product from the mains and other

equipment if a problem should occur.

• Read the manual carefully before use. Keep the

manual for future reference.

• Only use the device for its intended purposes. Do not

use the device for other purposes than described in

the manual.

• Do not use the device if any part is damaged or

defective. If the device is damaged or defective,

replace the device immediately.

Battery safety

• Use only the batteries mentioned in the manual.

• Do not use old and new batteries together.

• Do not use batteries of dierent types or brands.

• Do not install batteries in reverse polarity.

• Do not short-circuit or disassemble the batteries.

• Do not expose the batteries to water.

• Do not expose the batteries to re or excessive heat.

• Batteries are prone to leakage when fully discharged.

To avoid damage to the product, remove the batteries

when leaving the product unattended for longer

Produkt Specifikationer

Mærke:	Nedis
Kategori:	Fjernbetjening
Model:	TVRC21SNBK
Bredde:	80 mm
Dybde:	30 mm
Højde:	250 mm
Vægt:	160 g
Produktfarve:	Sort
Indbygget skærm:	Ingen
Husmateriale:	Acrylonitrile butadiene styrene (ABS),Rubber
Knapper med baggrundsbelysning:	Ingen
Harmoniseret systemkode (HS):	85299097
Batteritype:	AAA
Antal understøttede batterier:	2
Grænseflade:	IR trådløs
Indbygget batteri:	Ja
Mærke kompatibilitet:	Nedis
Fjernbetjening korrekt brug:	Universel
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m
Antal understøttede enheder:	2